Instruction/ maintenance manual of the product HT-1750DP Sony
Go to page of 48
HT-1750DP 4-244-184-31 (1) US Home Theater System 4-244-184- 31 (1) HT -1750DP Owner’s Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 US HT-1750DP 4-244-184-31(1) US – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
3 US HT-1750DP 4-244-184-31(1) US T able of Contents List of Button Locations and Reference Pages Main unit ............................................... 5 Hooking Up the Components Required cords ....................................... 6 Antenna hookups .
4 US HT-1750DP 4-244-184-31(1) US About This Manual The HT-1750DP consists of: – Receiver STR-K750P – Speaker system • Front/surround speakers SS-MSP75 • Center speaker SS-CNP75 • Sub woofer SA-WMSP75 – DVD player DVP-NS725P Tip The instructions in this manual describe the controls on the receiver.
List of Button Locations and Reference Pages 5 US HT-1750DP 4-244-184-31(1) US g ?/1 qd qf qg qh qj qk ql w; wa ws wd wg wf wh 17 8 4 0 qa qs 5 23 6 9 List of Button Locations and Reference Pages Main unit How to use this page Use this page to find the location of buttons that are mentioned in the text.
6 US HT-1750DP 4-244-184-31(1) US Hooking Up the Components Before you get started • Turn off the power to all components before making any connections. • Do not connect the AC power cord until all of the connections are completed. • Be sure to make connections firmly to avoid hum and noise.
Hooking Up the Components 7 US HT-1750DP 4-244-184-31(1) US Antenna hookups FM wire antenna (supplied) AM loop antenna (supplied) Notes on antenna hookups • To prevent noise pickup, keep the AM loop antenna away from the receiver and other components.
8 US HT-1750DP 4-244-184-31(1) US y AM FM 75 Ω COAXIAL DIGIT AL ANTENNA MONITOR SUB WOOFER VIDEO 1 VIDEO 2 DVD MD/T APE CD OPTICAL VIDEO 2 IN DVD IN COAXIAL IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUD.
Hooking Up the Components 9 US HT-1750DP 4-244-184-31(1) US y AM FM 75 Ω COAXIAL DIGIT AL ANTENNA MONITOR SUB WOOFER VIDEO 1 VIDEO 2 DVD MD/T APE CD OPTICAL VIDEO 2 IN DVD IN COAXIAL IN OUT IN AUDIO.
HT-1750DP 4-244-184-31(1) US 10 US y AM FM 75 Ω COAXIAL DIGIT AL ANTENNA MONITOR SUB WOOFER VIDEO 1 VIDEO 2 DVD MD/T APE CD OPTICAL VIDEO 2 IN DVD IN COAXIAL IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AU.
Hooking Up the Components HT-1750DP 4-244-184-31(1) US 11 US Connecting the AC power cord Before connecting the AC power cord of this receiver to a wall outlet, connect the speaker system to the receiver (page 12). Connect the AC power cord(s) of your audio/ video components to a wall outlet.
HT-1750DP 4-244-184-31(1) US 12 US SPEAKERS IMPEDANCE USE 8 – 16 Ω MONITOR SUB WOOFER VIDEO OUT AUDIO OUT FRONT CENTER SURROUND R R L L R R L L E e E e A A INPUT B E e A E e A E e A b Hooking Up a.
Hooking Up and Setting Up the Speaker System HT-1750DP 4-244-184-31(1) US 13 US Stripped cords are touching each other due to excessive removal of insulation.
HT-1750DP 4-244-184-31(1) US 14 US 45 ° 90 ° 20 ° B C C AA Performing initial setup operations Once you have hooked up the speakers and turned on the power, clear the receiver’s memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system.
Hooking Up and Setting Up the Speaker System HT-1750DP 4-244-184-31(1) US 15 US 45 ° 90 ° 20 ° B C C A A continued When placing surround speakers behind you (wide room) Note Do not place the center speaker further away from the listening position than the front speakers.
HT-1750DP 4-244-184-31(1) US 16 US 60 30 A B A B Multi channel surround setup (continued) x Front speaker distance ( L R DIST. XX ft.) Set the distance from your listening position to the front speakers ( A on page 14). x Center speaker distance ( C DIST.
Hooking Up and Setting Up the Speaker System HT-1750DP 4-244-184-31(1) US 17 US continued Tip The surround speaker placement parameter is designed specifically for implementation of the Digital Cinema Sound modes with virtual elements. With the Digital Cinema Sound modes, speaker placement is not as critical as other modes.
HT-1750DP 4-244-184-31(1) US 18 US Multi channel surround setup (continued) x Surround speaker size ( SL SR XXXXX) • If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”.
Hooking Up and Setting Up the Speaker System HT-1750DP 4-244-184-31(1) US 19 US LEVEL POWER POWER indicator Listening to the sub woofer First, turn down the volume on the receiver. The volume should be set to minimum before you begin playing the program source.
HT-1750DP 4-244-184-31(1) US 20 US Basic Operations Selecting the component Input Selector buttons Press the input selector button to select the component you want to use.
Basic Operations HT-1750DP 4-244-184-31(1) US 21 US Changing the display DIMMER Press DIMMER repeatedly to adjust the brightness of the display (3 steps).
HT-1750DP 4-244-184-31(1) US 22 US Enjoying Surround Sound Enjoying higher fidelity sound The Auto Format Direct (A.F.D.) mode allows you to select the decoding mode you want for your audio sound.
Enjoying Surround Sound HT-1750DP 4-244-184-31(1) US 23 US Selecting a sound field You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. Press To select MOVIE C.ST.EX A D C S * C.
HT-1750DP 4-244-184-31(1) US 24 US Selecting a sound field (continued) x C.ST.EX A (Cinema Studio EX A) Reproduces the sound characteristics of the Sony Pictures Entertainment “Cary Grant Theater” cinema production studio. This is a standard mode, great for watching most any type of movie.
Enjoying Surround Sound HT-1750DP 4-244-184-31(1) US 25 US Understanding the multi channel surround displays STEREO D.RANGE COAX OP T MONO MEMORY DIGITAL SP PRO LOGIC II aa SLEEP DTS LCR SW SL SR S LFE 12 3 4 5 6 7 8 9 q; qa qs 6 Tuner indicators: Lights up when using the receiver to tune in radio stations, etc.
HT-1750DP 4-244-184-31(1) US 26 US qs Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings).
Enjoying Surround Sound HT-1750DP 4-244-184-31(1) US 27 US Front balance ( L R BAL. L/R XX) Lets you adjust the balance between front left and right speakers. Center level (CTR XXX dB) Lets you adjust the level of the center speaker. Surround left level (SUR.
28 US HT-1750DP 4-244-184-31(1) US Receiving Broadcasts bbbb 1 0 2 5 0 bbb 1 3 5 0 Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Direct tuning You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote.
Receiving Broadcasts 29 US HT-1750DP 4-244-184-31(1) US continued Automatic tuning If you don’t know the frequency of the station you want, you can let the receiver scan all available stations in your area. 1 Press TUNER FM/AM repeatedly to select the FM or AM band.
30 US HT-1750DP 4-244-184-31(1) US Tuning to preset stations You can tune the preset stations by either of the following two ways. Scanning the preset stations 1 Press TUNER FM/AM. The last received station is tuned in. 2 Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want.
Other Operations 31 US HT-1750DP 4-244-184-31(1) US Other Operations 4 Press ENTER. 5 Repeat steps 2 to 4 to assign index name for another station or program source.
32 US HT-1750DP 4-244-184-31(1) US Recording (continued) Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP on the remote while the power is on.
Other Operations 33 US HT-1750DP 4-244-184-31(1) US x Decode priority (DEC. XXXX) Sets the appropriate decoding for incoming digital signals. • PCM priority mode (DEC. PCM) Use to enjoy playback from audio CD (PCM) and DVD. When used with media other than CD or DVD, you may experience noise.
34 US HT-1750DP 4-244-184-31(1) US You can use the remote RM-PP412 to operate the components in your system. Before you use your remote Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment.
Operations Using the Remote RM-PP412 35 US HT-1750DP 4-244-184-31(1) US Remote Operations Function Button DVD Receiver To watch DVD. TV/SAT Receiver To watch TV programs or satellite receiver. MD/TAPE Receiver To listen to Minidisc or audio tape. CD/SACD Receiver To listen to compact disc.
36 US HT-1750DP 4-244-184-31(1) US Remote Button Description (continued) Remote Operations Function Button AUDIO TV/ VCR/ Changes the sound to DVD player Multiplex, Bilingual or Multi channel TV Sound. SWAP*/ TV Swaps the small and ANGLE large picture.
Operations Using the Remote RM-PP412 37 US HT-1750DP 4-244-184-31(1) US Remote Operations Function Button SEARCH DVD player Select searching mode. MODE Press to select the unit for search (track, index, etc.) TOP MENU/ DVD player Displays DVD title. GUIDE Satellite tuner Displays guide menu.
38 US HT-1750DP 4-244-184-31(1) US Selecting the command mode of the remote (continued) 5 Repeat steps 1 to 4 to control other components. To cancel programming Press USE MODE during any step.
Operations Using the Remote RM-PP412 39 US HT-1750DP 4-244-184-31(1) US The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control.
40 US HT-1750DP 4-244-184-31(1) US To control a TV Maker Code(s) SONY 501, 502 DAEWOO 504, 505, 506, 507, 515, 544 FISHER 508 GOLDSTAR 503, 511, 512, 515, 534, 544 GRUNDIG 517, 534 HITACHI 513, 514, 5.
Additional Information 41 US HT-1750DP 4-244-184-31(1) US Additional Information If you encounter color irregularity on a nearby TV screen This speaker system is magnetically shielded to allow it to be installed near a TV set. However, color irregularities may still be observed on certain types of TV sets.
42 US HT-1750DP 4-244-184-31(1) US Troubleshooting (continued) There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component.
Additional Information 43 US HT-1750DP 4-244-184-31(1) US The FM reception is poor. Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. If you connect the receiver to an outdoor antenna, ground it against lightning.
44 US HT-1750DP 4-244-184-31(1) US Sensitivity: – Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: – Impedance: – S/N: 100 dB (A, 20 kHz LPF) Specifications AUDIO POWER SPECIFICATIONS.
Additional Information 45 US HT-1750DP 4-244-184-31(1) US AM tuner section Tuning range With 10-kHz tuning scale: 530 – 1710 kHz 4) With 9-kHz tuning scale: 531 – 1710 kHz 4) Antenna Loop antenna Intermediate Frequency 450 kHz Usable sensitivity 50 dB/m (at 1,000 kHz or 999 kHz) S/N 54 dB (at 50 mV/m) Harmonic distortion 0.
46 US HT-1750DP 4-244-184-31(1) US Supplied accessories FM wire antenna (1) AM loop antenna (1) Speaker connecting cord, long (2) Speaker connecting cord, short (3) Monaural connecting cord (1 phono t.
Additional Information 47 US HT-1750DP 4-244-184-31(1) US T ables of settings using the MAIN MENU button You can make various settings using the MAIN MENU, MENU / and MENU +/– buttons. The tables below show each of the settings that these buttons can make.
< LEVEL > FRONT CENTER SUR.L. SUR.R. S.W. D.RANGE EFCT. BAL LEVEL LEVEL LEVEL LEVEL COMP 1) LEVEL 2CH ST. zz A.F.D. AUTO zzzzz z DOLBY PL zzzzz z PLII MOV zzzzz z PLII MUS zzzzz z C.
An important point after buying a device Sony HT-1750DP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony HT-1750DP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony HT-1750DP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony HT-1750DP you will learn all the available features of the product, as well as information on its operation. The information that you get Sony HT-1750DP will certainly help you make a decision on the purchase.
If you already are a holder of Sony HT-1750DP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony HT-1750DP.
However, one of the most important roles played by the user manual is to help in solving problems with Sony HT-1750DP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony HT-1750DP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
