Instruction/ maintenance manual of the product HDW-S2000P Sony
Go to page of 158
HD DIGIT AL VIDEOCASSETTE RECORDER HD W -S2000 HD W -S2000P OPERA TION MANUAL [English] 1st Edition (Revised 1).
W ARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES. 1. Use the approved Power Cord (3-core mains lead)/ Appliance Connector/Plug with earthing-contacts that conforms to the safety regulations of each country if applicable. 2. Use the Power Cord (3-core mains lead)/Appliance Connector/Plug conforming to the proper ratings (Voltage, Ampere).
.
Table of Contents 1 Chapter 1 Overview Ta b le of Contents 1-1 F eatures ........................................................................................... 1-1 1-2 Example System Configuration .................................................
Ta b le of Contents 2 Table of Contents Chapter 6 Shot Mark Function 6-1 Overview ......................................................................................... 6-1 6-2 Shot Mark Operation Menu ..............................................
Chapter 1 Overview Chapter 1 Overview 1-1 Chapter 1 Over vie w 1-1 Features The HDW-S2000/S2000P is a high-definition (HD) digital videocassette recorder based on the HDCAM format.
Chapter 1 Overview 1-2 Chapter 1 Overview 1-1 Features High-performance heads and compatibility functions The newly developed high-performance heads and dynamic tracking (DT) technology provide high- density recording and playback in narrow tracks with high reliability.
Chapter 1 Overview Chapter 1 Overview 1-3 High quality variable speed playback and digital jog sound function In HDCAM format playback, the dedicated playback DT heads allow smooth, noiseless playback. During Betacam SX playback, noiseless playback is achieved through unique multihead playback technology.
Chapter 1 Overview 1-4 Chapter 1 Overview 1-1 Features The following conceptual diagram shows an example of use. Digital cassette BVE-series editor Tape control HDSDI/Analog composite Audio monitor An.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-1 Chapter 2 Location and Function of P ar ts 2-1 Contr ol P anels There are three control panels, as follows: •U pper control panel • Lower control panel •S witch panel Z CTL/TC EE TC MENU 59.
Chapter 2 Location and Function of Parts 2-2 Chapter 2 Location and Function of Parts 2-1 Contr ol P anels To open the lower control panel Push in the lower control panel unlock buttons to open the lower control panel. You can fix the lower control panel in any of five positions between vertical and horizontal.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-3 2-1-1 Upper Contr ol P anel Z 1(9P) 2(50P) RS-232C HDCAM BET ACAM SX BET ACAM/SP POWER PHONES REMOTE EJECT 1 POWER.
Chapter 2 Location and Function of Parts 2-4 Chapter 2 Location and Function of Parts 2-1 Contr ol P anels 2-1-2 Lower Contr ol P anel CTL/TC TC MENU VID. IN PB/EE CONFI SDI DISABL EE TCGSET 59.94 EE TC VID. IN PB/EE CONFI SDI DISABL TCGSET CTL/TC MENU 59.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-5 1 Audio control section 1 Audio selection function selector buttons INPUT (input signal selection mode) button: Pressing this button puts the unit into input signal selection mode.
Chapter 2 Location and Function of Parts 2-6 Chapter 2 Location and Function of Parts 2-1 Contr ol P anels DATA indicator: Lights when the audio output signals are recognized as data with the unit in recording, E-E 1) , or playback mode.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-7 5 REC (recording) controls These individually adjust the recording levels on channels 1 to 4, and cue audio. To set the recording level, put the unit into E-E mode, press to protrude the control knobs and adjust the level while watching the level meters.
Chapter 2 Location and Function of Parts 2-8 Chapter 2 Location and Function of Parts 2-1 Contr ol P anels 4 Time data/menu display section 1 Time data display This displays indicators relating to time data and other indicators.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-9 CONFI (ON)/PREREAD indicators These indicate the state of the VTR CONFI playback 1) function. When the CONFI playback function is enabled, the CONFI indicator appears, and when CONFI playback is actually being carried out the CONFI ON indicator also appears.
Chapter 2 Location and Function of Parts 2-10 Chapter 2 Location and Function of Parts 2-1 Contr ol P anels 1 SHUTTLE button To use the search dial for playback in shuttle mode, press this button, turning it on. For details of playback in shuttle mode, see the description of the search dial 5 .
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-11 8 REC INHI (recording inhibit) indicator This indicator is on or off according to the combination of the F5 (RECINH) setting on function menu page 4 and the record inhibit plug on the cassette, as shown in the following table.
Chapter 2 Location and Function of Parts 2-12 Chapter 2 Location and Function of Parts 2-1 Contr ol P anels 5 STOP button To stop recording or playback, press this button, turning it on.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-13 qa ALARM indicator and KEY INHI indicator ALARM indicator This lights when a hardware error is detected on the unit, and goes off when the error is resolved. When this indicator is lit, an error message appears in the time data/menu display section.
Chapter 2 Location and Function of Parts 2-14 Chapter 2 Location and Function of Parts 2-1 Contr ol P anels 4 TRIM buttons Use these buttons to trim an edit point to single-frame precision. Hold down the IN, OUT, AUDIO IN, or AUDIO OUT button, and press one of these buttons.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-15 1 Memory stick slot Use this to update the firmware. You can also save or load setup menu settings onto the memory stick. Note After inserting a memory stick, allow at least five seconds to elapse before removing it.
Chapter 2 Location and Function of Parts 2-16 Chapter 2 Location and Function of Parts 2-2 Connector P anel 2-2 Connector P anel 75 Ω Cooling fan Cooling fan 1 Analog audio input/output section 2 An.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-17 2 Analog video input/output section 1 REF. (reference) VIDEO INPUT connectors (BNC type) and 75 Ω termination switch Input a reference video signal.
Chapter 2 Location and Function of Parts 2-18 Chapter 2 Location and Function of Parts 2-2 Connector P anel 4 Digital signal input/output section 1 HDSDI (HD Serial Digital Interface) INPUT connectors (BNC type) The upper of these two connectors inputs HD format video/audio signals.
Chapter 2 Location and Function of Parts Chapter 2 Location and Function of Parts 2-19 1 REMOTE 2 PARALLEL I/O(50P) connector (D-sub 50-pin) Connect remote control signals from an external device.
Chapter 2 Location and Function of Parts 2-20 Chapter 2 Location and Function of Parts 2-2 Connector P anel 1 MONITOR OUTPUT R connector (XLR 3-pin, male) This outputs the audio signals whose output destination was set to ‘R’ with the audio monitor signal selection buttons in the audio control section.
Chapter 3 Preparations Chapter 3 Preparations 3-1 Chapter 3 Preparations 3-1 Connections to External De vices This unit can input serial digital signals (video and audio) from another digital VTR such as the HDW- 500/F500/M2100/M2100P.
Chapter 3 Preparations 3-2 Chapter 3 Preparations 75 Ω 75 Ω REMOTE 1-IN(9P) REMOTE 1-OUT(9P) HDSDI OUTPUT SDI OUTPUT 3 HDSDI INPUT REF . VIDEO INPUT REF .
Chapter 3 Preparations Chapter 3 Preparations 3-3 3-2 Reference Sync Signals This section describes how reference signals for the video output signals and servo system are selected. The output from the internal reference video signal generator is supplied to the output video signal and servo circuits as a reference signal.
Chapter 3 Preparations 3-4 Chapter 3 Preparations 3-2 Reference Sync Signals HDSDI INPUT REF . VIDEO INPUT HDSDI OUTPUT REF . VIDEO INPUT •C onnections for recording from a switcher or signal genera.
Chapter 3 Preparations Chapter 3 Preparations 3-5 •C onnections for playback • SDI OUTPUT • COMPOSITE • COMPONENT REF . VIDEO INPUT HDSDI OUTPUT 75 Ω HD video monitor SD video monitor HDW-S2.
Chapter 3 Preparations 3-6 Chapter 3 Preparations 3-3 Setup The principal setup operations before operating this unit can be carried out using setup menus. The setup menus of this unit comprise a basic setup menu and an extended setup menu. The contents of these menus are as follows.
Chapter 3 Preparations Chapter 3 Preparations 3-7 3-4 Superimposed Character Inf ormation When the function menu item CHARA is set to ON, the video signal output from the HDSDI OUTPUT 3 (SUPER) connec.
Chapter 3 Preparations 3-8 Chapter 3 Preparations 2 Time code reader drop frame mark (for 59.94i, 29.97PsF mode only) “.”: Indicates drop frame mode “:”: Indicates non-drop-frame mode 3 Time code generator drop frame mark (for 59.94i, 29.97PsF mode only) “.
Chapter 3 Preparations Chapter 3 Preparations 3-9 3-5 Cassettes Removing slack from the tape Press in one of the reels with a finger, and turn gently in the direction shown by the arrows until there is no slack in the tape. Ejecting a cassette Press the EJECT button.
Chapter 3 Preparations 3-10 Chapter 3 Preparations Large cassette Small cassette Press in the red record inhibit plug. (“ON”) Return this plug to its original position to enable recording on the tape again.
Chapter 3 Preparations Chapter 3 Preparations 3-11 3-6 Using a Memory Stick When a Memory Stick is inserted in the VTR, the file data can be stored on the Memory Stick , which enables you to share data among cameras. Note Use a Memory Stick formatted with this VTR.
Chapter 3 Preparations 3-12 Chapter 3 Preparations Notes • Prevent metallic objects or your finger from coming into contact with the terminal of the connecting section. •D o not attach any material other than the supplied label to the label space.
Chapter 4 Recording and Playback Chapter 4 Recording and Playback 4-1 Chapter 4 Recor ding and Pla ybac k 4-1 Recor ding This section describes video and audio recording on the unit. 4-1-1 Preparations for Recor ding Switch and menu settings Before beginning recording, make necessary switch and menu settings.
Chapter 4 Recording and Playback 4-2 Chapter 4 Recording and Playback 4-1 Recording Z EE TC VID. IN PB/EE CONFI SDI DISABL TCGSET CTL/TC MENU 59.94 POWER switch: ‘ I ’ side (on) Audio selection function selector buttons (see page 2-5) : Select the input audio signal.
Chapter 4 Recording and Playback Chapter 4 Recording and Playback 4-3 Adjusting the audio recording levels When carrying out audio recording at a reference level Leave the REC controls pressed in. The audio signals will be recorded at a preset reference level (a reference –20 dB indication for an input of +4 dBm).
Chapter 4 Recording and Playback 4-4 Chapter 4 Recording and Playback 4-1 Recording Setting an initial time code value Use the following procedure. 1 Set the CTL/TC to TC.
Chapter 4 Recording and Playback Chapter 4 Recording and Playback 4-5 • To synchronize to LTC data contained in the HDSDI signal input to this unit: TCG (F1): SDI PR/RGN (F2): LTC • To synchronize.
Chapter 4 Recording and Playback 4-6 Chapter 4 Recording and Playback 4-2 Pla ybac k This section describes playback of video and audio. 4-2-1 Preparations f or Pla ybac k Switch and menu settings Before beginning playback, make necessary switch and menu settings.
Chapter 4 Recording and Playback Chapter 4 Recording and Playback 4-7 Time data selection Displayed time data Use the CTL/TC setting in function menu HOME page to select one of CTL (control), time code, and user bit values.
Chapter 4 Recording and Playback 4-8 Chapter 4 Recording and Playback 4-2 Pla ybac k Playback in jog mode In jog mode, you can control the speed of playback by the speed of turning the search dial.
Chapter 4 Recording and Playback Chapter 4 Recording and Playback 4-9 To alternate between normal-speed playback and shuttle mode playback Set the search dial to the position corresponding to the desired shuttle playback speed, then switch between normal-speed playback and shuttle playback by pressing the PLAY and SHUTTLE buttons alternately.
Chapter 4 Recording and Playback 4-10 Chapter 4 Recording and Playback To perform continuous capstan override playback 1 Set setup menu item 111 (TSO PLAY) to TSO. 2 Hold down the DMC EDIT button and turn the MULTI CONTROL knob to select the playback speed.
Chapter 4 Recording and Playback Chapter 4 Recording and Playback 4-11 Storing a varying playback speed in memory To store the playback speed for DMC playback, use the following procedure.
Chapter 4 Recording and Playback 4-12 Chapter 4 Recording and Playback 3 Press the search dial or the SHUTTLE button or VAR button to enter shuttle/variable speed mode. The SHUTTLE/VAR indicator lights. Note Make sure that setup menu item 111 (TSO PLAY) is set to DIS.
Chapter 4 Recording and Playback Chapter 4 Recording and Playback 4-13 To start playback immediately after preroll Press the PREVIEW button. The PREVIEW button lights, and after preroll, DMC playback is carried out for the section from the speed variation start point, then playback continues at normal speed from the speed variation end point.
.
Chapter 5 Editing Chapter 5 Editing 5-1 Chapter 5 Editing 5-1 A utomatic Editing This section describes how to carry out automatic editing with this unit and another VTR connected to the REMOTE1-IN(9P) connector. 5-1-1 Overview Editing mode With this unit, you can use the following two edit modes for automatic editing.
Chapter 5 Editing 5-2 Chapter 5 Editing 5-1 A utomatic Editing Sequence of editing operations The following flowchart outlines the sequence of operations in automatic editing with two VTRs.
Chapter 5 Editing Chapter 5 Editing 5-3 Z EE TC VID. IN PB/EE CONFI SDI DISABL TCGSET CTL/TC MENU 59.94 5-1-2 Switch and Men u Settings Before beginning editing, make necessary switch and menu settings. POWER switch: ‘ I ’ side (on) Audio selection function selector buttons (see page 2-5) : Select the input audio signal.
Chapter 5 Editing 5-4 Chapter 5 Editing 5-1 A utomatic Editing 5-1-3 Selecting the Editing Mode To select the editing mode Select assemble editing or insert editing.
Chapter 5 Editing Chapter 5 Editing 5-5 Setting split edit points In split editing, you can set the edit points for audio and video independently. Set the audio edit points with the AUDIO IN/OUT buttons, and the video edit points with the IN/OUT buttons.
Chapter 5 Editing 5-6 Chapter 5 Editing 5-1 A utomatic Editing When the audio IN point is not set for insert editing of audio only As long as the audio OUT point is set, the VTR is ready for preview or editing. If the audio IN point has not been set, the current tape position is automatically used as the audio IN point.
Chapter 5 Editing Chapter 5 Editing 5-7 5-1-5 Modifying and Deleting Edit P oints If the edit points are not set correctly, for example if an OUT point is before a corresponding IN point, the DELETE button flashes, and it is not possible to carry out a preview or editing operation.
Chapter 5 Editing 5-8 Chapter 5 Editing 5-1 A utomatic Editing 5-1-6 Cue-up to Edit P oints and Prer oll To preroll for the edit IN point or to cue up to any edit point, use the following procedure. 1 Press the RECORDER button or PLAYER button to select the VTR on which you wish to operate.
Chapter 5 Editing Chapter 5 Editing 5-9 5-1-8 Carrying Out A utomatic Editing Monitor output During a preview, on a monitor connected to the recorder you can monitor the following video and audio. • From the preroll point to the IN point, you can monitor the playback from the recorder.
Chapter 5 Editing 5-10 Chapter 5 Editing 5-1 A utomatic Editing The following figure illustrates this. Using a single monitor for video and audio on both player and recorder For efficient editing if only one monitor is available, use the following method.
Chapter 5 Editing Chapter 5 Editing 5-11 After automatic editing, to adjust the edit points and reexecute the edit Hold down the DELETE button and press the ENTRY button to recall the edit points. After adjusting the edit points, press the AUTO EDIT button to carry out the edit again.
Chapter 5 Editing 5-12 Chapter 5 Editing 5-2 DMC Editing By controlling the player playback speed from the recorder, you can achieve variable speed editing. 5-2-1 Overview of DMC Editing Conditions for DMC editing DMC editing can be used for insert or assemble editing, but not for audio split editing.
Chapter 5 Editing Chapter 5 Editing 5-13 5-2-2 Carr ying Out DMC Editing Setting the edit points and player speed Use the following procedure. 1 Press the ASSEMBLE button or the desired INSERT button to select the editing mode. 2 Press the DMC EDIT button.
Chapter 5 Editing 5-14 Chapter 5 Editing This section describes the following automatic editing methods: •Q uick editing •C ontinuous editing • Standalone editing •M anual editing • Preread .
Chapter 5 Editing Chapter 5 Editing 5-15 5-3-3 Standalone Editing This refers to editing using as the player an external device which cannot be controlled remotely through the REMOTE1-IN(9P) connector. For example, you can record a color bar signal from a signal generator in the joints between the scenes of an already completed tape.
Chapter 5 Editing 5-16 Chapter 5 Editing Notes • In preread editing, if an input video signal is used as the reference signal for the output video signal, this forms a feedback loop.
Chapter 6 Shot Mark Function Chapter 6 Shot Mark Function 6-1 Chapter 6 Shot Mark Function 6-1 Overview This unit can record shot marks or use shot marks recorded on HDCAM tape. Shot marks are indications at desired points on a tape which enable faster cuing.
Chapter 6 Shot Mark Function 6-2 Chapter 6 Shot Mark Function Reading shot marks This unit reads in shot marks written on a tape and stores them in memory (to a maximum of 200). Once this data is stored in this unit, it is preserved even when the power is turned off.
Chapter 6 Shot Mark Function Chapter 6 Shot Mark Function 6-3 This section describes the settings in the shot mark operation menu. Displaying the shot mark operation menu With the function menu HOME page showing in the menu display, hold down the MARK button, and press the F5 (MENU) button.
Chapter 6 Shot Mark Function 6-4 Chapter 6 Shot Mark Function This section describes the operations concerning reading and writing shot marks. Note that the following operations cannot be carried out by remote control. 6-3-1 Reading Shot Marks To read in shot marks With a cassette loaded, hold down the LIST button and press the F FWD or REW button.
Chapter 6 Shot Mark Function Chapter 6 Shot Mark Function 6-5 To write in crash recording or assemble editing 1 Hold the MARK button down for at least 2 seconds. 2 At the position you wish to write the mark, hold down the ENTRY button, and press the MARK button.
Chapter 6 Shot Mark Function 6-6 Chapter 6 Shot Mark Function 6-3 Shot Mark Operations Example of list display The following figure shows how the list is organized. Selecting a shot mark Turn the MULTI CONTROL knob to align the asterisk cursor with the desired shot mark.
Chapter 6 Shot Mark Function Chapter 6 Shot Mark Function 6-7 To delete an individual shot mark Use the following procedure. 1 With the shot mark list displayed, select the shot mark to be deleted using the MULTI CONTROL knob. 2 Hold the MARK button down.
Chapter 6 Shot Mark Function 6-8 Chapter 6 Shot Mark Function Cuing up to shot marks adjacent to the current tape position (index function) 1 In item G01 of the shot mark operation menu (page 6-3) , select one of recording start mark, shot mark 1, shot mark 2, and post mark, or select all.
Chapter 6 Shot Mark Function Chapter 6 Shot Mark Function 6-9 6-3-6 Sor ting Shot Marks Z 3 21 1 With the shot mark list displayed, press the F5 (SETING) button. 2 Press the F2 (NEXT) button, and select SORTING LIST. 3 Press the F4 (ON) button to change the setting to ON.
.
Chapter 7 Tele-File 7-1 Chapter 7 Tele-File Chapter 7 T ele-File 7-1 Over vie w of T ele-File Functions Tele-File is a non-contact data carrier system. Tele-File enables data writing/reading between cassettes with memory labels and VTRs. It increases the efficiency of operations such as recording, playback and editing, and source data management.
Chapter 7 Tele-File 7-2 Chapter 7 Tele-File 7-2 Opening the T ele-File Menu Opening from the function menu Display page 5 of the function menu in the menu display section, and then press the F1 (TELE-F) button. The Tele-File menu opens. For details about the function menu, see Chapter 9 “Function Menu” (page 9-1).
Chapter 7 Tele-File 7-3 Chapter 7 Tele-File 7-3 T ele-File Menu How to read the display Shown below are examples of the default menu displays in the menu display section and the monitor display. For more information about how to display menus on the monitor, see the section “To display menus on the monitor” (page 10-2).
Chapter 7 Tele-File 7-4 Chapter 7 Tele-File Setting display area Displays the setting of the currently selected data type, and a cursor (“*” or “>”). The meaning of the cursor symbols is as follows: *: Indicates that the mode is clip data display mode or attribute data display/modify mode, and that data is selected.
Chapter 7 Tele-File 7-5 Chapter 7 Tele-File Monitor display Title The title (maximum 14 characters) set in attribute data display/modify mode. Selected clip number A 4-digit number representing the number of the selected clip (with the “*” cursor).
Chapter 7 Tele-File 7-6 Chapter 7 Tele-File Moving the cursor directly Regardless of the cursor’s current position, pressing one of the following buttons moves the cursor directly to the specified position in the same clip and displays the data.
Chapter 7 Tele-File 7-7 Chapter 7 Tele-File 7-3-3 Modifying Clip Data To modify clip data, put the unit into clip data display mode and then press the F2 (SELECT) button to put it into clip data modification mode (the cursor changes to “>”). The function assignments for menu items in clip data modification mode are as follows.
Chapter 7 Tele-File 7-8 Chapter 7 Tele-File To add and delete clips To add clips 1 Rotate the MULTI CONTROL knob to move the “*” cursor to the position where you want to insert the clip. 2 Press the F2 (SELECT) button. The unit enters clip data modification mode.
Chapter 7 Tele-File 7-9 Chapter 7 Tele-File To set the set or modified data as other time data Press the F6 (SET TO) button and select the time data (cue point, IN point, or OUT point), and then press the F5 (SET) or F6 (SET NL) button. The position where the data is set differs as follows, depending on the button pressed.
Chapter 7 Tele-File 7-10 Chapter 7 Tele-File To make comment settings Proceed as follows to make comment settings. 1 Select a clip. 2 Select comment. 3 Press the F2 (SELECT) button. The unit enters clip data modification mode. 4 Press the F2 (MODIFY) button.
Chapter 7 Tele-File 7-11 Chapter 7 Tele-File 7-3-5 Displa ying and Modifying Attrib ute Data You can display and modify attribute data. The example below shows attribute data displayed on the monitor.
Chapter 7 Tele-File 7-12 Chapter 7 Tele-File 7-3 T ele-File Menu To modify attribute data You can modify the title, ID, administrator data, and write inhibit setting attributes. However, the attributes cannot be modified when the control mode is “remote.
Chapter 8 UMID Functions Chapter 8 UMID Functions 8-1 Chapter 8 UMID Functions 8-1 Over vie w of UMID Functions The UMID (Unique Material Identifier) is a type of meta-data in video and audio materials. It has been internationally standardized in SMPTE Standard 330M.
Chapter 8 UMID Functions 8-2 Chapter 8 UMID Functions UMIDs can be recorded when recording video signals with this unit. You can select whether to inherit (copy) the UMID contained in input signals, or automatically or forcibly generate a new UMID.
Chapter 8 UMID Functions Chapter 8 UMID Functions 8-3 3 Press the F2 (USER) button. 4 The content of the setting is a character string (in this example “ABCD”). Select any character to change in the string by pressing the F3 (PREV) and F4 (NEXT) buttons.
Chapter 8 UMID Functions 8-4 Chapter 8 UMID Functions This section explains how to output and display UMIDs. Note When the number of active scan lines for HD SDI output is set to 720P, output and displaying of UMID are not carried out.
Chapter 8 UMID Functions Chapter 8 UMID Functions 8-5 4 Date/Time Date/Time data is displayed across two lines. The upper line shows the MJD (Modified Julian Date) contained in the Source Pack, converted to UTC. The lower line shows the data in unit count format (hours : minutes : seconds : frame) converted to UTC.
.
Chapter 9 Function Menu Chapter 9 Function Menu 9-1 Chapter 9 Function Men u 9-1 Overview The function menu allows you to make frequently made settings, such as selection of input video signals and time code settings.
Chapter 9 Function Menu 9-2 Chapter 9 Function Menu 9-1 Overview HOME2 page (user-defined function keys) Up to six function keys can be defined (i.e. six functions can be assigned to the F1 to F6 buttons in the HOME2 page).
Chapter 9 Function Menu Chapter 9 Function Menu 9-3 9-2 Function Men u Item List The function menu has the following items. HOME page a) When an editing operation is carried out, CONFI playback is disabled. b) The selection of LTC or VITC depends on the setting of F6 (TCR) in function menu page 1.
Chapter 9 Function Menu 9-4 Chapter 9 Function Menu Page 1 Item Setting F1 (TCG) Selects the signal source to which the internal time code generator synchronizes.
Chapter 9 Function Menu Chapter 9 Function Menu 9-5 Page 2 Item Setting F1 (V.PROC) Selects the control method for the internal digital video processor.
Chapter 9 Function Menu 9-6 Chapter 9 Function Menu Page 3 Item Setting F1 (SYNC) Sets the HD output signal sync phase. Setting method With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal sync phase across the range ±15 µs relative to this unit’s input reference signal.
Chapter 9 Function Menu Chapter 9 Function Menu 9-7 Page 4 Item Setting F1 (CAPSTN) Selects the number of fields for capstan lock in playback and editing. In 59.94i, 29.97PsF mode 2F: The capstan servo locks in units of 2 fields. • For tape output, color framing may not match the reference signal selected with the F2 (OUTREF).
Chapter 9 Function Menu 9-8 Chapter 9 Function Menu Page 5 9-2 Function Menu Item List Item Setting F1 (TELE-F) Displays the Tele-File menu. For details of the Tele-File menu, see Section 7-3 “Tele-File Menu” (page 7-3). F2 (UMID) Displays UMID information during recording/playback.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-1 Chapter 10 Setup Menus 10-1 Setup Menu Configuration This unit has the following setup menus. •B asic setup menu • Extended setup menu To access the extended setup menu, a setting on the internal SS-89 board is required.
Chapter 10 Setup Menus 10-2 Chapter 10 Setup Menus To display setup menus With the function menu HOME page showing in the menu display, press the F5 (MENU) button. The currently selected setup menu item is displayed in the menu display, with the menu item number flashing.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-3 To display a desired sub-item For a menu item having sub-items, you can select a desired sub-item as follows. 1 With a desired menu item selected, press the F2 (SELECT) button. The currently selected sub-item name flashes.
Chapter 10 Setup Menus 10-4 Chapter 10 Setup Menus Resetting the menu settings to their factory default values (menu item B20) To reset the current active menu settings to their factory default values, proceed as follows.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-5 Line conversion mode Use the following procedure. When setup menu item 018 ACTIVE LINE SELECT is set to 1035 Select the conversion mode in setup menu item 916 ACTIVE LINE 1035 CONVERT MODE. 1080 k 1035 (CONV): Convert the active scan lines from 1080 to 1035, without changing the aspect ratio.
Chapter 10 Setup Menus 10-6 Chapter 10 Setup Menus a) a) a) a) To recall settings from a menu bank When recalling the settings saved in one of menu banks 1 to 3, set the corresponding one of menu items B01 RECALL BANK 1 to B03 RECALL BANK 3 to ON, then press F5 (SET) button.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-7 The basic setup menu contains the following items. In the “Settings” column of the table, the factory default settings are indicated by an enclosing box. Item number Item name Settings 001 PREROLL TIME 0S .
Chapter 10 Setup Menus 10-8 Chapter 10 Setup Menus Item number Item name Settings 009 a) CHARACTER TYPE 011 a) CHARACTER V-SIZE SYSTEM FREQUENCY SELECT 10-3 Items in the Basic Setup Menu Determines th.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-9 Item number Item name Settings B01 RECALL BANK 1 Set to ON to recall menu settings from menu bank 1. B02 RECALL BANK 2 Set to ON to recall menu settings from menu bank 2. B03 RECALL BANK 3 Set to ON to recall menu settings from menu bank 3.
Chapter 10 Setup Menus 10-10 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu Select whether or not to flash the REC INHI indicator when the function menu item RECINH is set to OFF and the record inhibit plug on the cassette is pressed in.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-11 109 Item number Item name Settings FORCED EE WHEN TAPE UNTHREAD During tape threading and unthreading, and when no cassette is inserted, select whether the setting of the function menu item PB/EE controls the PB/EE setting for output signals.
Chapter 10 Setup Menus 10-12 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu 118 Select which switches and buttons can be operated when the KEY INHIBIT switch on the switch panel is set to ON. The following sub-items control different sets of switches and buttons independently.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-13 Menu items in the range 100 to 199, relating to the control panels (Continued) Menu items in the range 200 to 299, relating to the remote control interface 135 TELE-FILE THREAD COUNTER CLEAR MODE Select whether to clear the thread counter when formatting a Tele-File.
Chapter 10 Setup Menus 10-14 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu Item number Item name Settings 301 VAR SPEED RANGE FOR SYNCHRONIZATION Select the playback speed range when carrying out playback in variable speed mode from a remote control unit connected to the REMOTE-1 IN(9P) connector or REMOTE-1 OUT (9P) connector.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-15 Item number Item name Settings 310 REC INHIBIT Select the conditions under which recording is inhibited when F5 (RECINH) is set to ON in function menu page 4. [ALL] : All tape recording is inhibited.
Chapter 10 Setup Menus 10-16 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu 318 EDIT RETRY For two-VTR editing, set when this unit is used as the recorder. Selects the operation if the recorder was not synchronized in time. OFF: Editing is not carried out, and the unit stops.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-17 Menu items in the range 300 to 399, relating to editing operations (Continued) Menu items in the range 400 to 499, relating to preroll Item number Item name Settings 401 FUNCTION MODE AFTER CUEUP Select the state that the unit goes into after a cuing-up operation.
Chapter 10 Setup Menus 10-18 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu Menu items in the range 500 to 599, relating to tape protection Menu items in the range 600 to 650, relating t.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-19 602 VITC POSITION SEL-2 (Invalid in 24PsF or 23.98PsF mode) In 59.94i, 29.97PsF mode Select a line to insert the VITC in. (For SD output) 12H to [18H] to 20H: Select any line from 12 to 20. Note You can insert the VITC signal in two places.
Chapter 10 Setup Menus 10-20 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu Item number Item name Settings 608 PHASE CORRECTION Select whether or not to carry out phase correction control on the LTC generated by the time code generator. [OFF] : No control ON: Carry out control.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-21 Item number Item name Settings 620 TC CONVERT 24F -> 25F (In 50i or 25PsF mode only. Not displayed when operating in 720P-line mode.) Select whether to convert playback time code to 25F time code during playback of tape recorded in 24PsF or 23.
Chapter 10 Setup Menus 10-22 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu 653 UMID HD VANC LINE Specify the HDSDI signal VANC line into which the UMID should be inserted. 9, 572 14,577 19,582 10,573 15,578 20,583 11,574 16,579 12,575 [17,580] 13,576 18,581 Note The output VANC line during playback follows the setting for recording.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-23 Item number Item name Settings 703 BLANK LINE SELECT (Invalid in 24PsF or 23.98PsF mode) Switch blanking on or off for individual lines in the vertical blanking interval of the SD video signal. The Y/C signal and odd/even fields are blanked simultaneously.
Chapter 10 Setup Menus 10-24 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu 0 When the Betacam playback signal and output signal settings are “MSTER” (master), the setup amount specified for this sub-item is removed from the Betacam playback signal and is added to the output signal.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-25 SYSTEM PHASE SC (Invalid in 24PsF or 23.98PsF mode) 719 SYSTEM PHASE SYNC (Invalid in 24PsF or 23.98PsF mode) Adjust the SD output signal sync phase. 0 to [80H] to FFH 720 Adjust the SD output signal subcarrier phase.
Chapter 10 Setup Menus 10-26 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu Item name Settings Item number 726 H BLANKING WIDTH (Invalid in 24PsF or 23.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-27 Item number Item name Settings 801 DIGITAL JOG SOUND Turns the digital jog sound on and off. OFF: Digital jog sound is turned off. Audio of digital channels not subjected to speed correction is output.
Chapter 10 Setup Menus 10-28 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu Item number Item name Settings 809 AUDIO LEVEL METER DIMMER CONTROL Set the brightness of the audio level meters. [0] to 7: Set in this range. 0 is the brightest, and 7 the dimmest.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-29 903 FREEZE MODE Select the freeze mode and timing. [FIELD] : Freeze a video field. Field may be odd or even, according to the timing. FLD1: Freeze an odd field. FLD2: Freeze an even field. FRM12: Freeze a frame consisting of an odd field and following even field.
Chapter 10 Setup Menus 10-30 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu Item number Item name Settings Menu items in the range 900 to 999, relating to digital processing (Continued) 917 ACTIVE LINE 1080 CONVERT MODE (Valid only in 59.
Chapter 10 Setup Menus Chapter 10 Setup Menus 10-31 Item number Item name Settings 942 V FILTER SELECT (Invalid in 24PsF or 23.98PsF mode) Set the vertical interpolation filter coefficient for HD-SD converter output. The vertical resolution increases as the setting grows larger.
Chapter 10 Setup Menus 10-32 Chapter 10 Setup Menus 10-4 Items in the Extended Setup Menu 961 BACKGROUND COLOR (UC) (Invalid in 24PsF or 23.98PsF mode) Set the color of the part where no material exists (background) for up-converting. BACK GROUND COLOR: Set the color.
Chapter 11 Maintenance and Inspection 11-1 Chapter 11 Maintenance and Inspection Chapter 11 Maintenance and Inspection 11-1 Remo ving a Cassette When T ape Slac k Occur s If tape slack occurs in the unit, it is necessary to remove the upper lid and sound baffle.
11-2 Chapter 11 Maintenance and Inspection Chapter 11 Maintenance and Inspection This unit is equipped with a self-diagnosis function, and if a problem is detected, displays an error message in the time data display and on the monitor. If an error message appears, contact your Sony service representative.
Chapter 11 Maintenance and Inspection 11-3 Chapter 11 Maintenance and Inspection Error Message List Code Message Description – NO COMMUNICATION Abnormality in the interface between the lower control panel (KY-464/465 board) and SYS CPU (SS-89 board) has been detected on the lower control panel side.
11-4 Chapter 11 Maintenance and Inspection Chapter 11 Maintenance and Inspection 11-4 Moisture Condensation When the unit is suddenly moved from a cold to a warm location, or used in a very humid place, moisture from the air can condense on the head-drum.
Chapter 11 Maintenance and Inspection 11-5 Chapter 11 Maintenance and Inspection 11-5 Regular Chec ks 11-5-1 Digital Hours Meter The digital hours meter can display seven items of information, in corresponding display modes, about the operational history of the unit.
11-6 Chapter 11 Maintenance and Inspection Chapter 11 Maintenance and Inspection Component Digital hours meter indication (menu number in parenthesis) Guideline replacement intervals R: Replace C: Che.
Appendix Appendix A-1 Appendix Specifications General Recording format HDCAM Power requirements 100 to 240 VAC, 50/60 Hz Power consumption 2.2 A (220 W), when used without optional devices Peak inrush.
Appendix A-2 Appendix Specifications Fast forward/ rewind time Approx. 3 minutes with BCT- 124HDL Search speed Shuttle mode HDCAM playback: Still to approx. ±50 times normal playback speed (59.94i, 29.97PsF) Still to approx. ±58 times normal playback speed (50i, 25PsF) Still to approx.
Appendix Appendix A-3 Betacam SX playback Video Digital Audio (CH1 to CH4) Analog Betacam playback Video Audio Note The AFM function is not supported. Frequency response Dynamic range Distortion 20 Hz to 20 kHz +0.5 dB/–1.0 dB (0 dB at 1 kHz) 90 dB or more (at 1kHz, emphasis on) 0.
Appendix A-4 Appendix Specifications Processor adjustment range Video level ±3 dB/ – ∞ to +3 dB selectable Chroma level ±3 dB/ – ∞ to +3 dB selectable Setup level (59.
Appendix Appendix A-5 REMOTE 1-OUT(9P) D-sub 9-pin, female RS-232C D-sub 9-pin, male VIDEO CONTROL(15P) D-sub 15-pin, male (for optional BVR-50/50P) VIDEO CONTROL(9P) D-sub 9-pin, female (for optional.
Appendix A-6 Appendix Specifications Relation between HKDV-900/503 setting items and setup menu of this unit HKDV-900/503 setting items Setup menu items of this unit HD Master 740: MASTER LEVEL (HD) a.
Appendix Appendix A-7 Compatibility of playback tape formats HD/SD video output phase settings Item number Item name Settings M3 M3A: OUTPUT PHASE SELECT M3A0: HD PHASE SEL Select the HD video output signal phase with respect to the reference signal: 0H or -90H (HD) advanced.
Appendix A-8 Appendix Specifications Playback tape format conversion outputs a) For 1080/25PsF or 50i, output is downconverted to 576/ 50i. b) For 1080/29.97PsF or 59.94i, output is downconverted to 480/59.94i. c) For 576/50i, output is upconverted to 1080/50i.
Index Index I-1 Index A AC IN connector 2-18 ALARM indicator 2-13 Analog audio input/output section 2-16 video input/output section 2-17 ASSEMBLE button 2-12 Audio control section 2-5 monitor signal o.
Index Index I-2 Index N Non-drop frame mark 3-8 mode 9-4 O Operation mode 3-8 OUTREF (function menu) 9-7 P PANEL SELECT switch 2-15 Parts replacement 11-6 PB controls 2-7 PB/EE (function menu) 9-3 PHO.
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual.
Printed in Japan 2005.05.13 2004 Sony Cor poration HDW-S2000/S2000P (SYL) 3-854-863- 02 (1) Printed on 100% recycled paper..
An important point after buying a device Sony HDW-S2000P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony HDW-S2000P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony HDW-S2000P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony HDW-S2000P you will learn all the available features of the product, as well as information on its operation. The information that you get Sony HDW-S2000P will certainly help you make a decision on the purchase.
If you already are a holder of Sony HDW-S2000P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony HDW-S2000P.
However, one of the most important roles played by the user manual is to help in solving problems with Sony HDW-S2000P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony HDW-S2000P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
