Instruction/ maintenance manual of the product HDR-SR11E Sony
Go to page of 110
SERVICE MANUAL Son y EMCS Co. LEVEL 2 Link SERVICE NOTE MODEL INFORMA TION T ABLE SPECIFICA TIONS FRAME SCHEMA TIC DIAGRAM BLOCK DIAGRAMS DISASSEMBL Y PRINTED WIRING BOARDS REP AIR PAR TS LIST SCHEMA TIC DIAGRAMS Link Revision History Revision History HDR-SR11/SR11E/SR12/SR12E_L2 Ve r.
— 2 — ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 SPECIFICA TIONS These specifications are extr acted from instr uction man ual of HDR-SR11E/SR12E. System Video compression format: AVCHD (HD)/ MP EG 2 (SD)/J PEG (Still ima ges) Audio compression format: Dolb y Digital 2/5.
— 3 — ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 SPECIFICA TIONS Syst em Video compression format: AVCHD (HD) / MP EG 2 (SD)/JPEG (Still images) Audio compressi on format: Dolby Digital 2/5.
— 4 — ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 概略仕様 システム 映像圧縮方式 ： AVC H D （ HD ） /MPEG 2 （ SD ） /JPE G （静止画） 音声圧縮方式 ： Dolby Digital2/5 .1ch ドルビーデジタル 5.
— 5 — HDR-SR11/SR11E/SR12/SR12E_L2 Model information tab le •A bbre viation AU S: Australian model CH : Chinese model CND : Canadian model HK : Hong K ong model J: Japanese model JE : T ourist m.
— 6 — ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 SAFETY-RELA TED COMPONENT W ARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMA TIC DIA GRAMS AND IN THE P AR TS LIST ARE CRITICAL T O SAFE OPERA TION.
— 7 — ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1. 注意事項をお守りください。 サービスのとき特に注意を要する個所については， キャビネ.
1-1 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1. SER VICE NO TE 1-1. PO WER SUPPL Y DURING REP AIRS In this unit, about 10 seconds after po wer is supplied to the battery terminal using the re gulated pow er supply (8.4V), the po w er is shut off so that the unit cannot operate.
1-2 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-2-3. Self-diagnosis Code T able C C C C E E E E E E E E E E E E E E Block Function 04 13 13 32 20 31 61 61 62 62 62 62 62 62 62 62 91 94 Detailed Code 00 01 02 60 00 00 10 11 00 01 02 03 10 11 12 20 01 00 Symptom/State Non-standard battery is used.
1-3 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-3. METHOD OF COPING WITH SHIFT LENS ERROR about 330 msec Fig. 2 Change in output v oltage of R5549 on the LD-230 board Note: The length of lo w section will vary a little depending on the conditions.
1-4 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-3-2. E : 62 : 11 [Shift Lens Overheating (Pitc h)] Occurred Connect by the SeusEX and perform the following process. Order Block P age Address Data Procedure 11 18 0 7430 01 Write the data.
1-5 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-3-3. E : 62 : 12 [Shift Lens Overheating (Y aw)] Occurred Connect by the SeusEX and perform the following process. Order Block P age Address Data Procedure 11 18 0 7430 01 Write the data.
1-6 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-4. PRECA UTION ON REPLA CING THE VC-516 BO ARD DESTINA TION D A T A When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
1-7 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-2. 自己診断機能 1-2-1. 自己診断機能について 本機の動作に不具合が生じたとき，自己診断機能が.
1-8 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-2-3. 自己診断コード表 C C C C E E E E E E E E E E E E E E ブロック 機能 04 13 13 32 20 31 61 61 62 62 62 62 62 62 6.
1-9 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-3. シフトレンズエラーの対処方法 図2. LD-230基板R5549の出力電圧の変化 注意：Lowの区間の長さ.
1-10 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 順序 ブロック ページ アドレス データ 作業内容 11 18 0 7430 01 データを書き込む。 （セット起 動.
1-11 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-3-3. E：62：12 （シフトレンズオーバーヒート （YAW） ） が出た場合 SeusEXで接続し、次の手順を.
1-12 ENGLISH JAP ANESE ENGLISH JAP ANESE HDR-SR11/SR11E/SR12/SR12E_L2 1-4. VC-516基板交換時の注意 仕向けデータ 補修用基板と交換する時，補修用基板に書かれている仕.
1-13 HDR-SR11/SR11E/SR12/SR12E_L2 (ENGLISH) 1-6. PRECA UTION ON REPLA CING THE CABINET (G(900)) ASSY (HDR-SR11) The model display adopts the laser printing method.Therefore, the cabinet (G(900)) assy for replacement differs depending on the destination.
1-14 HDR-SR11/SR11E/SR12/SR12E_L2 (ENGLISH) 1-7. PRECA UTION ON REPLA CING THE CABINET (G(900)) ASSY (HDR-SR11E) The model display adopts the laser printing method.Therefore, the cabinet (G(900)) assy for replacement differs depending on the destination.
1-15 HDR-SR11/SR11E/SR12/SR12E_L2 (ENGLISH) 1-8. PRECA UTION ON REPLA CING THE CABINET (G(900)) ASSY (HDR-SR12) The model display adopts the laser printing method.Therefore, the cabinet (G(900)) assy for replacement differs depending on the destination.
1-16E HDR-SR11/SR11E/SR12/SR12E_L2 (ENGLISH) 1-9. PRECA UTION ON REPLA CING THE CABINET (G(900)) ASSY (HDR-SR12E) The model display adopts the laser printing method.Therefore, the cabinet (G(900)) assy for replacement differs depending on the destination.
2-1 2. DISASSEMBL Y HDR-SR11/SR11E/SR12/SR12E_L2 NO TE FOR REP AIR • Make sure that the flat cab le and fle xible board are not crac ked of bent at the terminal. Do not inser t the cable insufficiently nor crook edly . • When remov e a connector , don’t pull at wire of connector .
2-2 HDR-SR11/SR11E/SR12/SR12E_L2 2-2-1. O VERALL SECTION-1 - Cabinet (G) Assy - HDD - Bottom Cabinet Block 2-2-2. O VERALL SECTION-2 - Cabinet (R) Section - Cabinet (T op) Block - EVF Block 2-2-3. O VERALL SECTION-3 - BT P anel Block - Cabinet (F) Section 2-2-6.
2-3 HDR-SR11/SR11E/SR12/SR12E_L2 2-2. DISASSEMBL Y 2-2-1. O VERALL SECTION-1 F ollo w the disassembly in the n umerical order given. 1 Cabinet (G) Assy ( 1 -1 to 1 -6) 2 HDD ( 2 -1 to 2 -3) 3 Bottom C.
2-4 HDR-SR11/SR11E/SR12/SR12E_L2 2-2-2. O VERALL SECTION-2 F ollo w the disassembly in the n umerical order given. 1 Cabinet (R) Section ( 1 -1 to 1 -8) 2 Cabinet (T op) Bloc k ( 2 -1 to 2 -5) 3 EVF B.
2-5 HDR-SR11/SR11E/SR12/SR12E_L2 2-2-3. O VERALL SECTION-3 F ollo w the disassembly in the n umerical order given. 1 BT P anel Block ( 1 -1 to 1 -4) 2 Cabinet (F) Section ( 2 -1 to 2 -9) EXPLODED VIEW.
2-6 HDR-SR11/SR11E/SR12/SR12E_L2 2-2-4. CABINET (L) SECTION-1 F ollo w the disassembly in the n umerical order given. 1 VC-516 Board ( 1 -1 to 1 -8) EXPLODED VIEW HARDWARE LIST 1 VC-516 Board 1 -4 (#3.
2-7 HDR-SR11/SR11E/SR12/SR12E_L2 2-2-5. CABINET (L) SECTION-2 F ollo w the disassembly in the n umerical order given. 1 JK-356 Board ( 1 -1 to 1 -6) 2 Control Switch Bloc k (PS28100) ( 2 -1) 3 FR-278 .
2-8 HDR-SR11/SR11E/SR12/SR12E_L2 EXPLODED VIEW HARDWARE LIST 2-2-6. CABINET (F) SECTION F ollo w the disassembly in the n umerical order given. 1 Lens Bloc k ( 1 -1 to 1 -4) 2 Control Switch Bloc k (R.
2-9 HDR-SR11/SR11E/SR12/SR12E_L2 2-2-7. LENS BLOCK F ollo w the disassembly in the n umerical order given. 1 ST -185 Board ( 1 -1 to 1 -4) 2 LD-230 Board ( 2 -1 to 2 -3) 3 Flash Unit ( 3 -1 to 3 -6) E.
2-10 HDR-SR11/SR11E/SR12/SR12E_L2 2-2-8. CABINET (R) SECTION F ollo w the disassembly in the n umerical order given. 1 Loud Speak er ( 1 -1 to 1 -3) 2 CK-185 Board ( 2 -1 to 2 -3) 3 P anel Block ( 3 -.
2-11E HDR-SR11/SR11E/SR12/SR12E_L2 2-2-9. P ANEL BLOCK F ollo w the disassembly in the n umerical order given. 1 Hinge Assy ( 1 -1 to 1 -12) 2 PD-343 Board ( 2 -1 to 2 -9) 3 LCD ( 3 -1) EXPLODED VIEW .
HELP HDR-SR11/SR11E/SR12/SR12E_L2 HELP Sheet attachment positions and procedures of processing the fle xib le boards/har nesses are shown. HELP01 EVF Block EVF Block FP-811 Fle xible Board FP-811 Fle .
HELP HDR-SR11/SR11E/SR12/SR12E_L2 HELP02 Open slightly the BT P anel Bloc k BT P anel (900) Assy BT Har ness Retainer Main F rame DC Jac k Harnesses (to the DC IN Jac k) DC Jac k Harnesses DC Jac k Harnesses Secure the space by arr anging DC Jac k Har ness as shown in the figure .
HELP HDR-SR11/SR11E/SR12/SR12E_L2 FP-803 Fle xible Board Claws HELP03 FP-799 Fle xible Board P ass the FP-799 Fle xible Board through under the screwing in position of the Main F rame. Tw o CutOuts Tw o Libs FP-798 Complete Fle xible Board Main F rame.
HELP HDR-SR11/SR11E/SR12/SR12E_L2 HELP05 VC-516 Board Shield Sheet (AN) Be careful not to ov erlap it into the patter n prohibition area. Be careful not to bring it out of IC.
HELP HDR-SR11/SR11E/SR12/SR12E_L2 T ape (A) T ape (A) Fle xible Board (Lens Barrier Unit) Inser t the Flexib le Board in to the Claw . 1 mm +1 0 0 mm +1 0 Inser t the Flexib le Board in to the Claw and the Board.
HELP HDR-SR11/SR11E/SR12/SR12E_L2 HELP07 T ape (A) T ape (A) Lens Barrier Unit Lens Barrier Unit Lib Fle xible Board (Control Switxh Block RS28900) HELP08.
HELP HDR-SR11/SR11E/SR12/SR12E_L2 Microphone Unit Be careful not to ov erlap the bended the fle xible board to the Microphone unit. Printed end Microphone Unit 1mm Microphone Fr ame (900) Microphone Holder Assy (900) Mountain f old V alley f old NON WO VEN (T0.
HELP HDR-SR11/SR11E/SR12/SR12E_L2 Mountain f old To the LD-230 Board Reinf orcement To the VC-516 Board V alley f old FP-801 F elxuble Board V alley f old HELP11 Claw Push the Fle xible Board direction of the arrow .
HELP HDR-SR11/SR11E/SR12/SR12E_L2 CMOS Block Assy (CM-094 Board) CM Radiation Sheet (900) Be sure not to load to CM-094 Board and not to bend the sheet. Lens F rame (R(900)) HELP13 CK-185 Board Har nesses (Loud Speaker(1.6cm)) NS Nkob Slide Switch Engage the NS knob with the Slide witch.
HELP HDR-SR11/SR11E/SR12/SR12E_L2 Fle xible Board (TP Block Assy) Leav e wr inkles to the Flexib le Board. HELP15.
HELP HDR-SR11/SR11E/SR12/SR12E_L2 A Adhesive part 1 Fold dotted line parts of the FP-807 flexible board as shown in figure. 5 Put the adhesive part and FP-807 flexible board on the hinge assy according to the position of the boss. Boss Hinge assy 2 Pass the FP-807 flexible board through the flexible clamp .
HELP HDR-SR11/SR11E/SR12/SR12E_L2 6 Inser t the FP-454 flexib le board to the fle xible clamp as shown in figure . FP-454 fle xible board Flexible clamp.
HDR-SR11/SR11E/SR12/SR12E_L2 Link Link 3. BLOCK DIA GRAMS OVERALL BLOCK DIAGRAM (5/6) OVERALL BLOCK DIAGRAM (4/6) OVERALL BLOCK DIAGRAM (3/6) OVERALL BLOCK DIAGRAM (2/6) OVERALL BLOCK DIAGRAM (1/6) PO.
3-1 HDR-SR11/SR11E/SR12/SR12E_L2 3. BLOCK DIA GRAMS 3-1. O VERALL BLOCK DIA GRAM (1/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-2 HDR-SR11/SR11E/SR12/SR12E_L2 3-2. O VERALL BLOCK DIA GRAM (2/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-3 HDR-SR11/SR11E/SR12/SR12E_L2 3-3. O VERALL BLOCK DIA GRAM (3/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-4 HDR-SR11/SR11E/SR12/SR12E_L2 3-4. O VERALL BLOCK DIA GRAM (4/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-5 HDR-SR11/SR11E/SR12/SR12E_L2 3-5. O VERALL BLOCK DIA GRAM (5/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-6 HDR-SR11/SR11E/SR12/SR12E_L2 3-6. O VERALL BLOCK DIA GRAM (6/6) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-7 HDR-SR11/SR11E/SR12/SR12E_L2 3-7. PO WER BLOCK DIA GRAM (1/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
3-8 HDR-SR11/SR11E/SR12/SR12E_L2 3-8. PO WER BLOCK DIA GRAM (2/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagr am where the component is located. CONTROL SWITCH BLOCK (PS28100) FP-811 FLEXIBLE BOARD BL-017 BOARD MODE_LED_VDD D006 (ACCESS) CHARGE_LED_VDD ACCESS_LED_VDD D_2.
3-9E HDR-SR11/SR11E/SR12/SR12E_L2 3-9. PO WER BLOCK DIA GRAM (3/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.
4-1 HDR-SR11/SR11E/SR12/SR12E_L2 4-1. FRAME SCHEMA TIC DIA GRAM FRAME 4. PRINTED WIRING BO ARDS AND SCHEMA TIC DIA GRAMS FP-799 FLEXIBLE BO ARD FP-801 FLEXIBLE BO ARD FP-806 FLEXIBLE BO ARD FP-803 FLE.
4-2. SCHEMA TIC DIA GRAMS HDR-SR11/SR11E/SR12/SR12E_L2 PD-343 BOARD (LCD DRIVE) FP-801 FLEXIBLE BOARD (LD-VC CONNECTION) FP-804 FLEXIBLE BOARD (VC-JK CONNECTION) FP-805 FLEXIBLE BOARD (VC-MS CONNECTIO.
4-2 HDR-SR11/SR11E/SR12/SR12E_L2 4-2. SCHEMA TIC DIAGRAMS 4-2. SCHEMA TIC DIAGRAMS 4-2. SCHEMA TIC DIA GRAMS (ENGLISH) 1. Connection 2. Adjust the distance so that the output wa vef or m of Fig. a and the Fig. b can be obtain. When indicating par ts by ref erence number , please include the board name.
4-3 HDR-SR11/SR11E/SR12/SR12E_L2 4-2. SCHEMA TIC DIAGRAMS 4-2. SCHEMA TIC DIAGRAMS ENGLISH JAP ANESE ENGLISH JAP ANESE (JAP ANESE) 回路図共通ノート （他に必要なノートは各ブロッ.
HDR-SR11/SR11E/SR12/SR12E_L2 Schematic diagrams of the CM-094, VC-516 and LD-230 boards are not shown. P ages 4-4 to 4-30 are not sho wn..
4-31 HDR-SR11/SR11E/SR12/SR12E_L2 PD-343 LND001-LND006 (SB28900) PAGE 4-42 of LEVEL2 CONTROL SWITCH BLOCK LN7901-LN7906 FLEXIBLE PAGE 4-36 FP-454 of LEVEL2 FP-807 PAGE 4-39 FLEXIBLE LND001-LND039 of LEVEL2 NO MARK:REC/PB MODE Note: LCD901 is not included in PD-343 complete board.
4-32 HDR-SR11/SR11E/SR12/SR12E_L2 FR-278 PAGE 4-41 of LEVEL2 FLEXIBLE FP-812 LND001-LND012 NO MARK:REC/PB MODE 2.8 2.8 1.4 0 0 0.8 0.6 0 2.8 1.2 1.3 1.2 1.4 1.4 1.4 1.2 1.3 1.3 1.1 1.1 FB9003 C9014 4.7u C9010 0.047u R9005 1M C9005 0.1u FB9001 C9013 22u R9004 10k C9008 0.
4-33 HDR-SR11/SR11E/SR12/SR12E_L2 CK-185 FLEXIBLE LND040-LND078 PAGE 4-39 FP-807 of LEVEL2 FLEXIBLE LND091-LND141 PAGE 4-41 FP-808 of LEVEL2 Note: SP901 is not included in CK-185 complete board.
4-34 HDR-SR11/SR11E/SR12/SR12E_L2 ST -185, JK-356 • Ref er to page 4-2 (English), 4-3 (Japanese) f or mar k 0 . of LEVEL2 LND101-LND114 FP-803 FLEXIBLE PAGE 4-38 FLASH UNIT (FL25500) of LEVEL2 PAGE 4-43 LND001-LND004, LND009, LND010, LND014-LND017, LND023, LND024 NO MARK:REC/PB MODE 0 283 0 2.
4-35 HDR-SR11/SR11E/SR12/SR12E_L2 CR-089 LND040-LND084 FLEXIBLE PAGE 4-39 FP-806 of LEVEL2 CN7402 45P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36.
4-36 HDR-SR11/SR11E/SR12/SR12E_L2 BL-017, MS-381, FP-454 PAGE 4-38 of LEVEL2 LND023-LND044 FP-805 FLEXIBLE Note: BT7301(lithium starage battery) is not included in the MS-381 complete board.
4-37 HDR-SR11/SR11E/SR12/SR12E_L2 FP-798, FP-799, FP-801 LND027 LF7191 XX 1 3 4 2 LF7192 XX 1 3 4 2 LF7193 XX 1 3 4 2 LF7194 XX 1 3 4 2 LND017 LND021 LND001 LND020 LND022 LND016 LND023 LND018 LND005 L.
4-38 HDR-SR11/SR11E/SR12/SR12E_L2 FP-802, FP-803, FP-804, FP-805 (PRINTED WIRING BOARD is omitted.) LND011 LND027 LND020 LND015 LND021 LND001 LND022 LND016 LND008 LND025 LND013 LND009 LND012 LND014 LN.
4-39 HDR-SR11/SR11E/SR12/SR12E_L2 FP-806, FP-807 CN7402 of LEVEL2 PAGE 4-35 CR-089 (PRINTED WIRING BOARD is omitted.) LND056 LND009 LND002 LND069 LND040 LND020 LND053 LND047 LND005 LND063 LND031 LND05.
4-40 HDR-SR11/SR11E/SR12/SR12E_L2 FP-809 (PRINTED WIRING BOARD is omitted.) LND008 LND103 LND104 LND106 LND108 LND105 LND107 LND116 LND114 LND110 LND112 LND115 LND109 LND113 LND111 LND130 LND128 LND12.
4-41 HDR-SR11/SR11E/SR12/SR12E_L2 FP-808, FP-811, FP-812 PAGE 4-33 CN5801 CK-185 of LEVEL2 (PRINTED WIRING BOARD is omitted.) LND009 LND002 LND020 LND005 LND031 LND010 LND035 LND030 LND006 LND018 LND0.
4-42 HDR-SR11/SR11E/SR12/SR12E_L2 CONTROL SWITCH BLOCK (RS28900), CONTROL SWITCH BLOCK (SB28900), CONTROL SWITCH BLOCK (PS28100) CONTROL SWITCH BLOCK(RS28900) is replaced as block, so that PRINTED WIRING BOARD is omitted.
4-43 HDR-SR11/SR11E/SR12/SR12E_L2 FLASH UNIT (FL25500), FP-712 ST-185 PAGE 4-34 of LEVEL2 CN5002 FLASH UNIT(FL25500) is replaced as block, so that PRINTED WIRING BOARD is omitted.
4-3. PRINTED WIRING BO ARDS HDR-SR11/SR11E/SR12/SR12E_L2 Link Link CK-185 BOARD BL-017 BOARD CR-089 BOARD ST-185 BOARD PD-343 BOARD MS-381 BOARD FP-454 FLEXIBLE BOARD FP-798 FLEXIBLE BOARD JK-356 BOAR.
4-44 HDR-SR11/SR11E/SR12/SR12E_L2 4-3. PRINTED WIRING BOARDS • : Uses unleaded solder . • : Circuit board : Flexible board P attern from the side which enables seeing. : patter n of the rear side (The other la yers ’ patterns are not indicated) • Through hole is omitted.
HDR-SR11/SR11E/SR12/SR12E_L2 Printed wir ing boards of the CM-094, VC-516 and LD-230 boards are not shown. P ages 4-45 to 4-48 are not sho wn..
4-49 HDR-SR11/SR11E/SR12/SR12E_L2 17 28 1 3 46 1 1 3 3 4 4 6 6 1 3 46 1 3 46 13 4 6 A1 A2 A3 A4 A5 A6 A7 A8 A9 B1 B2 B3 B4 B5 B6 B7 B8 B9 C1 C2 C4 C5 C6 C7 C8 C9 D1 D2 D3 D4 D5 D6 D7 D8 D9 E1 E2 E3 E4.
4-50 HDR-SR11/SR11E/SR12/SR12E_L2 FR-278 (4 layer s), CK-185 (2 layer s) : Uses unleaded solder . FR-278, CK-185 1 2 3 4 1 45 6 7 8 LND582 S5801 S5802 S5803 S5804 S5805 S5806 S5808 2 1 50 51 1 23 8 39.
4-51 HDR-SR11/SR11E/SR12/SR12E_L2 ST -185 (4 la yers), JK-356 (2 lay ers), CR-089 (2 layer s) : Uses unleaded solder . ST -185, JK-356, CR-089 1 2 13 14 11 15 6 10 1 5 3 6 2 4 CL5001 CN5001 C5002 C500.
4-52 HDR-SR11/SR11E/SR12/SR12E_L2 12 AK 11 10 1 CN7302 (MEMORY STICK CONNECTOR) D7301 (ACCESS) LN7301 1 2 21 22 + + CN7301 C7301 C7302 C7303 C7304 C7305 D7302 D7303 R7301 R7302 R7303 R7304 R7305 R7306.
4-53E HDR-SR11/SR11E/SR12/SR12E_L2 BL-017 (2 lay ers), FP-454 (1 layer), FP-798 (2 la yers) : Uses unleaded solder . BL-017, FP-454, FP-798 1 19 23 22 21 20 LF7191 LF7192 LF7193 LF7194 CN7191 LND001 L.
NOTE NO TE: Characters A to Z of the electrical par ts list indicate location of exploded vie ws in which the desired part is shown. Link Link ELECTRICAL P AR TS LIST ELECTRICAL P AR TS LIST ACCESSORIES HDR-SR11/SR11E/SR12/SR12E_L2 Link Link 5.
5. REP AIR P ARTS LIST 5-1 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 (ENGLISH) NOTE: • -XX, -X mean standardized parts, so they may ha ve some dif ferences from the original one. • Items marked “*” are not stocked since the y are seldom required for routine service.
5-2 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 Ref. No. Part No. Description Ref. No. Part No. Description 1 X-2188-804-1 CABINET (700) ASSY , BOTTOM 2 A-1494-362-A CR-.
5-3 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-2. O VERALL SECTION-2 DISASSEMBL Y HARDWARE LIST Ref. No. Part No. Description Ref.
5-4 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-3. O VERALL SECTION-3 DISASSEMBL Y HARDWARE LIST Ref. No. Part No. Description Ref.
5-5 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-4. CABINET (L) SECTION-1 DISASSEMBL Y HARDWARE LIST Ref. No. Part No.
5-6 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-5. CABINET (L) SECTION-2 ns: not supplied DISASSEMBL Y HARDWARE LIST Ref.
5-7 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 DISASSEMBL Y HARDWARE LIST 5-1-6. CABINET (F) SECTION Ref. No. Part No. Description Ref.
5-8 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-7. LENS BLOCK ns: not supplied DISASSEMBL Y HARDWARE LIST Ref. No. Part No.
5-9 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-8. CABINET (R) SECTION DISASSEMBL Y HARDWARE LIST Ref. No. Part No. Description Ref.
5-10 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-9. P ANEL BLOCK DISASSEMBL Y HARDWARE LIST Ref. No. Part No. Description Ref.
5-11 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-10. EVF BLOCK HARDWARE LIST Ref. No. Part No. Description Ref. No. Part No.
5-12 5. REP AIR PAR TS LIST 5. REP AIR PAR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 5-1-11. BT P ANEL BLOCK ns: not supplied HARDWARE LIST Ref. No. Part No.
5-13 Ref. No. Part No. Description Ref. No. Part No. Description 5-2. ELECTRICAL P AR TS LIST HDR-SR11/SR11E/SR12/SR12E_L2 A-1494-359-A BL-017 BOARD, COMPLETE ********************** < CAP ACITOR > C5701 1-125-777-11 CERAMIC CHIP 0.
5-15 Ref. No. Part No. Description Ref. No. Part No. Description HDR-SR11/SR11E/SR12/SR12E_L2 A-1494-362-A CR-089 BOARD, COMPLETE ********************** < CONNECTOR > * CN7401 1-821-664-21 CONNE.
5-16 Ref. No. Part No. Description Ref. No. Part No. Description HDR-SR11/SR11E/SR12/SR12E_L2 < COIL > L9001 1-400-588-11 INDUCTOR 10uH < RESISTOR > R9004 1-218-965-11 RES-CHIP 10K 5% 1/16.
5-19 Ref. No. Part No. Description Ref. No. Part No. Description HDR-SR11/SR11E/SR12/SR12E_L2 A-1494-358-A MS-381 BOARD, COMPLETE *********************** (BT7301 (lithium storage battery) is not included in MS-381 complete board.
5-20 Ref. No. Part No. Description Ref. No. Part No. Description HDR-SR11/SR11E/SR12/SR12E_L2 < RESISTOR > R5901 1-218-957-11 RES-CHIP 2.2K 5% 1/16W R5902 1-218-955-11 RES-CHIP 1.
5-29 HDR-SR11/SR11E/SR12/SR12E_L2 • EXCEPT J MODEL to J MODEL Checking supplied accessories. • Ref er to page 5-1 f or mark 0 . AC Adaptor (AC-L200/L200B) * Compatible in L200 and L200B.
5-30E HDR-SR11/SR11E/SR12/SR12E_L2 • J MODEL 付属品 • 0 マークについては，5-1ページを参照して下さい。 AC アダプター (AC-L200/L200B) * L200 と L200B には 互換.
#1: M1.7 X 2.5 (Black) 2-635-562-1 1 2.5 1.7 #10: M1.7 X 4.0 (Silver) 2-599-475-31 1.6 1.7 #6: M1.4 X 1.7 (Silver) 2-598-474-01 1.7 1.4 #7: M1.7 X 1.6 (Black) 7-627-552-18 #3: M1.7 X 2.5 (Red) 2-660-401-01 2.5 1.7 #2: M1.7 X 4.0 (Black) 2-635-562-31 4.
HARD W ARE LIST (2/7) #21: M1.4 X 3.0 (Black) 2-662-396-21 3.0 1.4 #22: M1.7 X 5.0 (T apping) (Silver) 3-083-261-01 1.7 5.0 1.7 5.5 #23: M1.7 X 4.0 (T apping) (Black) 3-080-204-11 4.0 1.7 #24: B1.7 X 5.5 (T apping) (Black) 4-679-805-11 #25: M1.7 X 3.0 (Black) 2-635-562-21 3.
HARD W ARE LIST (3/7) #41: M3.0 X 8.0 (T apping) (Silver) 3-065-748-01 8.0 3.0 #42: M2.0 X 4.0 (T apping) (Silver) 7-628-253-00 2.0 4.0 #43: M1.7 X 4.0 (Red) 2-660-401-31 4.0 1.7 #46: M1.7 X 3.0 (Red) 2-660-401-11 #45: M1.4 X 2.5 (Silver) 2-587-151-01 #47: M1.
HARD W ARE LIST (4/7) #61: M3.0 X 10.0 (Black) 7-682-549-09 10.0 3.0 #62: M2.0 X 3.0 (Silver) 3-080-202-21 3.0 2.0 #63: M5.0 X 12.5 (Black) 3-060-811-21 12.5 5.0 #64: M1.7 X 5.0 (T apping) (Silver) 2-666-551-21 5.0 1.7 #65: M1.4 X 3.5 (Silver) 2-635-591-01 3.
HARD W ARE LIST (5/7) #81: M1.7 X 2.5 (Silver) 2-515-756-01 2.5 1.7 #82: M1.4 X 1.4 (Silver) 3-272-251-01 1.4 1.4 #83: M1.7 X 7.0 (T apping) (Black) 3-080-204-41 #84: M2.0 X 3.0 (Silver) 3-072-453-11 #85: M1.7 X 2.5 (Black) 2-515-483-11 #86: M1.7 X 4.
HARD W ARE LIST (6/7) #101: M2.0 X 5.0 (Silver) 7-621-555-39 5.0 2.0 #107: M2.0 X 5.0 (Silver) 3-032-750-01 5.0 2.0 #108: M1.7 X 3.0 (T apping) (Black) 2-695-430-01 #111: M1.7 X 4.0 (T apping) (Black) 2-887-124-01 #102: M2.6 X 8.0 (Black) 7-621-284-30 8.
HARD W ARE LIST (7/7) #121: M2.0 X 4.0 (T apping) (Silver) 3-080-205-11 #123: M4.0 X 8.0 (Black) 7-682-561-09 8.0 4.0 6.0 3.0 #122: M3.0 X 6.0 (Black) 7-682-547-09 4.
Re vision History Rever se HDR-SR11/SR11E/SR12/SR12E_L2 Ve r. 1.0 Date 2008.01 History Of f icial Release Contents — S.M. Rev . issued — 985225431.
An important point after buying a device Sony HDR-SR11E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony HDR-SR11E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony HDR-SR11E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony HDR-SR11E you will learn all the available features of the product, as well as information on its operation. The information that you get Sony HDR-SR11E will certainly help you make a decision on the purchase.
If you already are a holder of Sony HDR-SR11E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony HDR-SR11E.
However, one of the most important roles played by the user manual is to help in solving problems with Sony HDR-SR11E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony HDR-SR11E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
