Instruction/ maintenance manual of the product VH410 Sony Ericsson
Go to page of 19
VH410 Extended User guide.
Contents Headset overview .........................................................................5 Introduction ..................................................................................6 Charging ............................................
1 2 3 4 5 6 8 7 9 1. 2. 3. 3 This is an Internet version of this publication. © Print only for private use..
4. 5. 3 1 2 6. 7. 1 2 4 This is an Internet version of this publication. © Print only for private use..
Headset overview See illustration 1. 1 Ear speaker 2 Ear hook 3 On/off key 4 Indicator light 5 Microphone 6 Volume keys 7 Call key 8 Charger connector 9 Ear bud 5 This is an Internet version of this publication.
Introduction The VH410 Bluetooth ™ Handsfree can be connected to any Bluetooth ™ compatible device that supports the headset. This User guide focuses on use with a Sony Ericsson mobile phone. 6 This is an Internet version of this publication. © Print only for private use.
Charging Before using the headset for the first time, you need to charge it with the supplied charger for 8 hours (See illustration 2). The normal charging time is 2.5 hours. Use Sony Ericsson chargers only. 7 This is an Internet version of this publication.
Turning on and off To turn on the headset • Press and hold down until the indicator light shows a steady green or red light. If the light is red, the headset needs charging. After 3 seconds, the light turns off and the headset is on. To turn off the headset • Press and hold down until the indicator light shows a green or red light.
Pairing the headset Pairing the headset with a phone To use the headset with a phone, you need to pair the headset with the phone. After successful pairing, the headset connects automatically to the phone as soon as the headset is turned on and within range.
Multipoint With the multipoint feature, you can use the headset with two different phones at the same time. Before you use this feature, you need to enable it. To enable the multipoint feature 1 Make sure the headset is turned off. 2 Press and hold down on the headset until the indicator light flashes green and red alternately.
Putting on the headset To put on the headset • Slide the ear hook behind your ear and point the microphone towards your mouth. See illustration 3 and 4. You can use the headset with or without the ear hook. You can also use the headset either on the left or right ear.
Calling When you have paired the headset with your phone, you can make and receive calls as long as the headset is turned on. To make a call • Dial the number using the phone keys. The call is automatically activated in the headset. To end a call • Press the end call key.
Battery A battery that has been infrequently used, or a new one, could have reduced capacity. You may need to recharge it a number of times. When the battery level is low, the indicator light flashes red and you hear a low beep. If you do not charge the headset, it turns off after 10 minutes.
Removing the cover To remove the cover • See illustration 6. You can see the regulatory information on the headset. 14 This is an Internet version of this publication.
Resetting the headset Reset the headset if it behaves unexpectedly. Resetting the headset removes all information about paired devices. To reset the headset • Press and hold down for 10 seconds. To reset the headset to factory settings • Simultaneously press and hold down and the call handling key during pairing mode.
Troubleshooting The headset is automatically turned off • The battery level is too low. You hear a beep approximately 10 minutes before the headset turns off. Charge the battery. • The headset turns off if you do not pair it with the phone within 10 minutes.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity for VH410 We, Sony Ericsson Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type DDA-0002028 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.
An important point after buying a device Sony Ericsson VH410 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony Ericsson VH410 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony Ericsson VH410 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony Ericsson VH410 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony Ericsson VH410 will certainly help you make a decision on the purchase.
If you already are a holder of Sony Ericsson VH410, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony Ericsson VH410.
However, one of the most important roles played by the user manual is to help in solving problems with Sony Ericsson VH410. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony Ericsson VH410 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
