Instruction/ maintenance manual of the product 8CXT B&C Speakers
Go to page of 2
8CXT Coaxials LF Drivers LF Nd Drivers Coaxials HF Drivers Horns 400 W continuous program power capacity 100° nominal coverage 75 – 20000 Hz response 94 dB sensitivity Specifications Nominal Diameter 210 mm (8 in) Nominal Impedance 8 ohm Minimum Impedance 6.
impedance. Loudspeaker in free air. 4 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. 6 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range .
An important point after buying a device B&C Speakers 8CXT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought B&C Speakers 8CXT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data B&C Speakers 8CXT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, B&C Speakers 8CXT you will learn all the available features of the product, as well as information on its operation. The information that you get B&C Speakers 8CXT will certainly help you make a decision on the purchase.
If you already are a holder of B&C Speakers 8CXT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime B&C Speakers 8CXT.
However, one of the most important roles played by the user manual is to help in solving problems with B&C Speakers 8CXT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device B&C Speakers 8CXT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center