Instruction/ maintenance manual of the product Cyber-shot DSC-F828 Sony
Go to page of 10
1 Firmware Update Manual for Sony Cyber - shot digital still cameras - DSC - F828 The term „Firmware“ refers to the software in your Cyber - shot camera.
2 • Memory Stick slot / Memory Stick adapter or / CompactFlash card / Microdrive adapter ) • USB port S ystem r equirement s Microsoft Windows® 98/ 98SE / ME / 2000Professional / XP Professional/ XP Home Edition Mac OS 9.1/ 9.2/ X v10.0/ X v10.1/ X v10.
3 Step 2 - Copy the firmware update file to the Memory Stick / Memory Stick PRO / CompactFlash card / Microdrive media and load it to your camera • Put the (new or format ted ) Memory Stick / Memory.
4 Step 3 - Install the firmware update file on your camera Before you proceed: If the power runs out during the update, this can make your Cyber - shot camera inope rable! Therefore please use the originally supplied AC adapter as power - source.
5 • At „Version“, you will find a menu, where you need to select „Update“. „ A ccess“ will be shown on a black screen . • If an error is shown at this step or during the rest of the up dating - process, please refer to the section „problems that may occur“ in this document.
6 • As the firmware update is executed, you will see three circle signs. The circle signs will begin to blink and then turn on one - by - one. Once all three circles are lit, the update is finished. The text „Finished – Turn off and on again“ appears on the screen.
7 ("RESET" Button) Step 4 - Check the firmware version in your camera • Turn the mode - switch to SETUP . • While pressing the menu button, turn the camera on. • Select SETUP 2 > VERSION and check the Version number. • It should be the new o ne.
8 • Error 20: No software file Cause: No file was found on the Memory Stick / Memory Stick PRO / CompactFlash card / Microdrive media . Proceed : Copy the firmware update file to your Memory Stick /.
9 Causes: • The file o n your Memory Stick / Memory Stick PRO / CompactFlash card / Mic rodrive media is not valid • You tried to downgrade the camera • You tried to upgrade your camera with the.
10 Please push the "RESET" button with some sharp pointed item Note that all settings except language and Video out will be initialised again after pushing the "RESET" button. ("RESET" Button) Check the firmware version in your camera • Turn the mode - switch to SETUP .
An important point after buying a device Sony Cyber-shot DSC-F828 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony Cyber-shot DSC-F828 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony Cyber-shot DSC-F828 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony Cyber-shot DSC-F828 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony Cyber-shot DSC-F828 will certainly help you make a decision on the purchase.
If you already are a holder of Sony Cyber-shot DSC-F828, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony Cyber-shot DSC-F828.
However, one of the most important roles played by the user manual is to help in solving problems with Sony Cyber-shot DSC-F828. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony Cyber-shot DSC-F828 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
