Instruction/ maintenance manual of the product CSS-TNA Sony
Go to page of 32
2-634-266- 11 (1) Cyber -shot Station 2005 Sony Corporation CSS-TNA Operating Instructions GB FR Mode d’emploi.
2-GB English Before operating the product, please read this manual thoroughly and retain it for future reference. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture.
3-GB CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4-GB Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
5-GB Table of contents Notes on using the Cyber-shot Station ............................................................................ 6 Features ......................................................................................................
6-GB Notes on using the Cyber-shot Station Refer to the operating instructions for your camera as well as this manual. The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product. About the Adaptor plate: • Three types of Adaptor plates are included with the Cyber-shot Station.
7-GB Features The CSS-TNA can be used with the DSC-N1, DSC-T9, and DSC-T5 digital still cameras. When you place a digital still camera (here in after referred to as the “camera”) on the Cyber-shot Station, you can use the Cyber-shot Station in the following way.
8-GB Identifying the parts Cyber-shot Station Remote Control A d aptor p l ate POWER l amp Remote sensor CHARGE l amps POWER b utton (CAMERA) Mu l t i connector SLIDE SHOW b utton DISPLAY SELECT switc.
9-GB 3 Connect the AC Adaptor to the DC IN jack of the Cyber-shot Station. To remove the Adaptor plate Slide the EJECT switch on the Cyber-shot Station ( 1 ) and lift the Adaptor plate upright ( 2 ).
10-GB Placing the camera on the Cyber-shot Station Attach the camera, as refering to the image below. – Insert the “Memory Stick Duo” into the camera. When you use data in the internal memory, do not insert the “Memory Stick Duo” into the camera.
11-GB Charging temperature The temperature range for charging is 0 °C to +40 °C (+32 °F to +104 °F). However, to provide maximum battery efficiency, the recommended temperature range when charging is +10 °C to +30 °C (+50 °F to +86 °F). On battery life • The battery life is limited.
12-GB Slide Show You can playback a series of still images and movies recorded with your camera by only pressing the SLIDE SHOW button on the remote control or the Cyber-shot Station. 1 Set the mode switch of the camera to , and turn on the power by pressing the POWER button on the Cyber-shot Station or the remote control.
13-GB Printing still images Even if you do not have a computer, you can easily print still images by connecting your camera via the Cyber-shot Station to a PictBridge compliant printer.
14-GB Connecting the camera to your computer via the Cyber-shot Station 1 Connect the Cyber-shot Station to your computer by the USB cable supplied with the Cyber-shot Station. 2 Turn on your camera. The USB connection between the camera and your computer will be established.
15-GB Troubleshooting If any problems occur with your products, refer to the following solutions. If the problem persists, contact your Sony dealer. Symptom Unable to charge the battery pack (when the.
16-GB Symptom Your computer does not recognize the camera Buttons on the Cyber-shot Station or the remote control do not work, and no operations can be performed The connection between the printer and.
17-GB Specifications Cyber-shot Station Input/Output connectors A/V OUT (MONO) jack (Monaural) Minijack Video * :1 Vp-p, 75 Ω , unbalanced, sync negative Audio * : 327 mV (47 k Ω loaded) Output impedance: 2.2 k Ω * When DSC-N1/DSC-T9/DSC-T5 is connected.
2-FR Français Avant d’utiliser cet appareil, lisez attentivement ce mode d’emploi et conservez-le pour toute référence ultérieure. AVERTISSEMENT Pour ne pas risquer un incendie ou une décharge électrique, n’exposez pas cet appareil à la pluie ou à l’humidité.
3-FR Table des matières Remarques sur l’utilisation de la Cyber -shot Station .................................................... 4 Caractéristiques .................................................................................................
4-FR Remarques sur l’utilisation de la Cyber-shot Station Consultez le mode d’emploi de votre appareil ainsi que ce manuel. La Cyber-shot Station ne doit pas être soumise à la poussière, à l’humidité et à l’eau. A propos de la plaque adaptatrice : • La Cyber-shot Station est livrée avec trois types de plaques adaptatrices.
5-FR Caractéristiques Le CSS-TNA peut être utilisé avec les appareils photo numériques DSC-N1, DSC-T9 et DSC-T5. Si vous placez un appareil photo numérique (appelé ci-après « appareil photo ») sur la Cyber-shot Station, vous pouvez utiliser celle-ci de la manière suivante.
6-FR Identification des différents éléments Cyber-shot Station Télécommande P l aque a d aptatr i ce T é mo i n POWER Capteur T é mo i ns CHARGE Touc h e POWER (CAMERA) Mu l t i -connecteur Tou.
7-FR 3 Raccordez l’adaptateur secteur à la prise DC IN de la Cyber-shot Station. Pour retirer la plaque adaptatrice Faites coulisser le commutateur EJECT de la Cyber-shot Station ( 1 ) et soulevez la plaque adaptatrice en la tenant verticalement ( 2 ).
8-FR Placement de l’appareil photo sur la Cyber-shot Station Placez l’appareil photo comme illustré ci- dessous. – Insérez le « Memory Stick Duo » dans l’appareil photo. Lorsque vous utilisez les données de la mémoire interne, n’insérez pas le « Memory Stick Duo » dans l’appareil photo.
9-FR Température de charge La plage des températures de charge est comprise entre 0 °C et +40 °C (+32 °F et +10 °C). Toutefois , pour offrir un maximum d’efficacité, la plage des températures de charge recommandée est comprise entre +10 °C et +30 °C (+50 °F et +86 °F).
10-FR Visualisation d’images sur un écran de téléviseur 1 Raccordez le câble de liaison audio et vidéo (fourni) à la prise A/V OUT (MONO) de la Cyber-shot Station et aux prises d’entrée audio/vidéo du téléviseur.
11-FR Impression d’images fixes Même si vous ne disposez pas d’ordinateur, vous pouvez facilement imprimer des images fixes en raccordant votre appareil photo à une imprimante compatible PictBridge via la Cyber-shot Station.
12-FR Raccordement de l’appareil photo à votre ordinateur via la Cyber-shot Station 1 Raccordez la Cyber-shot Station à votre ordinateur à l’aide du câble USB fourni avec la Cyber-shot Station. 2 Mettez l’appareil photo sous tension. La connexion USB est établie entre l’appareil photo et votre ordinateur.
13-FR Dépannage Si un problème survient avec vos produits, reportez-vous aux solutions suivantes. Si les problèmes persistent, contactez votre revendeur Sony.
14-FR Symptôme Impossible de lire les images/sons sur un téléviseur Impossible de lire les photos/sons sur l’écran de l’appareil photo. L’ordinateur ne reconnaît pas votre appareil photo Les touches de la Cyber-shot Station ou de la télécommande ne fonctionnent pas et aucune opération ne peut être effectuée.
15-FR Symptôme Impossible d’imprimer des images fixes Il est impossible d’installer l’appareil sur la Cyber-shot Station Cause/Solution • La Cyber-shot Station n’est pas correctement raccordée à l’imprimante. t Vérifiez que la Cyber-shot Station et l’imprimante sont raccordées correctement à l’aide du câble USB.
Spécifications Cyber-shot Station Connecteurs d’entrée/de sortie Prise A/V OUT (MONO) (monaural) Miniprise Video * :1 Vp-p, 75 Ω , asymétrique, sync négative Audio * : 327 mV (à une charge de 47 k Ω ) Impédance de sortie : 2,2 k Ω * Lorsque le DSC-N1/DSC-T9/DSC-T5 est raccordé.
An important point after buying a device Sony CSS-TNA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony CSS-TNA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony CSS-TNA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony CSS-TNA you will learn all the available features of the product, as well as information on its operation. The information that you get Sony CSS-TNA will certainly help you make a decision on the purchase.
If you already are a holder of Sony CSS-TNA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony CSS-TNA.
However, one of the most important roles played by the user manual is to help in solving problems with Sony CSS-TNA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony CSS-TNA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
