Instruction/ maintenance manual of the product CFD-S36 Sony
Go to page of 2
Sony Corporation ©2001 Printed in India Operating Instructions Manual de instrucciones CD Radio Cassette- Cor der 3-230-890- 41 (1) CFD-S26 CFD-S26L CFD-S36 CFD-S36L CFD-926L Connect the mains lead A or insert six R20 (size D) batteries (not supplied) into the battery compartment B .
Remote Control (CFD-S36/S36L only) Mando a distancia (sólo CFD-S36/S36L) Location of controls/Ubicación de los controles To turn on/off the power CFD-S26L/S36L/926L: Press OPERATE. CFD-S26/S36: Press POWER. To adjust the volume Press VOLUME +, – (VOL +, – on the remote, CFD-S36/S36L only).
An important point after buying a device Sony CFD-S36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony CFD-S36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony CFD-S36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony CFD-S36 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony CFD-S36 will certainly help you make a decision on the purchase.
If you already are a holder of Sony CFD-S36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony CFD-S36.
However, one of the most important roles played by the user manual is to help in solving problems with Sony CFD-S36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony CFD-S36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center