Instruction/ maintenance manual of the product CFD-121 Sony
Go to page of 24
CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 3-858-850- 51 (1) CD Radio Cassette-Cor der 1996 by Sony Corporation Operating Instructions CFD-121.
Introduction 2 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. This symbol is intended to alert the user to the presence of.
3 Introduction Basic Operations CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 T able of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Player .
Basic Operations 4 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Playing a CD Basic Operations Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to CD. 2 Press OPEN/CLOSE down to open the CD compartment and place a CD on the CD compartment. 3 Close the CD compartment.
Basic Operations Basic Operations 5 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Display Use these buttons for additional operations Playing time Track number 4 Press ^ . The player plays all the tracks once. OPEN/CLOSE FUNCTION VOLUME To Do this Adjust the volume Turn VOLUME.
Basic Operations 6 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Listening to the radio Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to RADIO FM or AM. 2 Turn TUNING to tune in a radio station. If the received FM stereo is too weak, the reception becomes monaural.
Basic Operations Basic Operations 7 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Use these buttons for additional operations To Do this Adjust the volume Turn VOLUME. Turn off the radio Set FUNCTION to TAPE (CD/RADIO OFF). To improve broadcast reception Reorient the antenna for FM.
Basic Operations 8 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Playing a tape Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to TAPE(CD/ RADIO OFF). 2 Press p6 to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only.
Basic Operations Basic Operations 9 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Use these buttons for additional operations To Do this Adjust the volume Turn VOLUME. Stop playback Press p6 Fast-forward or rewind the tape* Press 0 or ) Pause playback Press P .
Basic Operations 10 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Connect the supplied AC power cord (see page 16). 1 Press p6 to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record.
Basic Operations Basic Operations 11 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Use these buttons for additional operations To Press Stop recording p6 Pause recording P Press the button again to resume recording. Tips • Adjusting the volume or the tone will not affect the recording level.
The CD Player 12 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Using the display You can check information about the CD using the display. The CD Player DISPLAY/ENT Checking the total track numbers and playing time Press DISPLAY/ENT in stop mode. Total playing time Total track numbers Checking the remaining time Press DISPLAY/ENT while playing a CD.
13 The CD Player The CD Player CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Locating a specific point in a track You can locate a specific point in a track while playing a CD using + or = . To locate Press a point while listening to + (forward) or = the sound (backward) while playing and hold down until you find the point.
The CD Player 14 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 15 ). 1 Set FUNCTION to CD. 2 Press MODE until the repeat mode you want appears in the display.
15 The CD Player The CD Player CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Creating your own pr ogram (Program Play) You can arrange the playing order of the tracks on a CD. Tips • You can play the same program again, since the program is saved until you open the CD compartment or switch FUNCTION.
Setting Up 16 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Choosing the power sources You can use the AC power or batteries as a power source. Use the AC power source whenever you record since recording consumes much power.
17 Setting Up Setting Up CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Adjusting the sound emphasis (TONE/MEGA BASS) You can adjust the tone and reinforce the bass sound. Adjusting the tone Turn TONE. Turn the control clockwise to enhance the high tone and counterclockwise to enhance the low tone.
Additional Information 18 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Pr ecautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.
19 Additional Information CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
Additional Information 20 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 T r oubleshooting General Symptom The power does not come on. There is no audio. The audio is weak or has poor quality. The picture of your TV becomes unstable. The CD does not play/“00 -- --” lights in the display even when a CD is in place.
21 Additional Information CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Symptom The tape does not record. The audio is weak/The audio quality is poor. The sound is distorted. Remedy • Make sure the tape is inserted properly. • Make sure the safety tab of the cassette is in place.
Additional Information 22 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation.
23 Additional Information CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channels driven from 150 - 10,000 Hz; rated 2 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.
Additional Information 24 CFD-121.E_3-858-850-5X.U/CA/AU/TW/E92 Index A Adjusting sound emphasis 17 tone 17 B Batteries for player 16 C CD player 12 Choosing power sources 16 Cleaning cabinet 22 tape .
An important point after buying a device Sony CFD-121 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony CFD-121 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony CFD-121 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony CFD-121 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony CFD-121 will certainly help you make a decision on the purchase.
If you already are a holder of Sony CFD-121, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony CFD-121.
However, one of the most important roles played by the user manual is to help in solving problems with Sony CFD-121. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony CFD-121 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
