Instruction/ maintenance manual of the product IRH15C Azden
Go to page of 8
INFRA RED WIRELESS SYSTEM User ’ s Guide IRR-30 / IRR-15 Receiver IRH-15c / IRB-10c / IRN-10 Transmitter IRD-10/IRD-30/IRD-60 Sensors 1-12-17 Kamirenjaku Mitaka-shi T okyo 181-8533 Japan T el :+81(0)422-55-5115 F ax :+81(0)422-55-0131 E-mail : sales@azden.
2 Page Subject 2 Important Safety Instructions 3 Handling care for Ni-MH battery 4 Introduction 5 Feature 6 System configuration, Installation case beside Plasma Display Monitor 7 IRR-30 Receiv.
3 Maintenance and Care Handling Care for Ni-MH battery 1 T o prevent the battery break, carefully ready this manual. 2 The operation environment of battery is − 20 ℃∼＋ 60 ℃ . If the operation temperature is out of this range, the battery may damage.
4 Introduction 13 Charger Troubleshooting About AC/DC adapter Use Azden recommending AC/DC adapter for recharging the battery on the transmitter unit. BC-27 for IRR-15 / IRR-30 BC-29 for IRB-10c / IRN-10 / IRH-15c The single most important thing to AL W A YS check when trouble arises is the battery .
5 Receiver ◆ New circuit design for minimizing the interference with the Plasma display . ◆ New method for eliminating the strident noise. ◆ Don't get interference by other generally used wireless method like UHF and VHF . At the same location, even adjacent rooms, same package can be used without any interference.
6 System Configuration IRR- 30 2CH IRD- 3 0 T ran sm i t te r Amplifier Installation case beside Plasma Display Monitor Sensor should be away more than 1.5m from PDP . IRD-10 is recommended to use beside PDP since the receipt angle narrow than IRD-30.
7 IRR-30 Receiver Set up 1. Power Switch - turns the receiver On and Off. 2. Power LED - indicates the power state of the receiver. 3. Receiving Sensors - internal receiving infrared sensors. 4. Channel 1 Volume - adjusts the output volume for Channel 1.
9 IRB-10c Transmitter 1. Batteries for the IRB-10c: The IRB-10c uses two "AA" batteries for power. They are placed in the battery compartment. After sliding the battery case door off, carefully place FRESH batteries in the compartment in the directions shown on the sticker.
An important point after buying a device Azden IRH15C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Azden IRH15C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Azden IRH15C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Azden IRH15C you will learn all the available features of the product, as well as information on its operation. The information that you get Azden IRH15C will certainly help you make a decision on the purchase.
If you already are a holder of Azden IRH15C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Azden IRH15C.
However, one of the most important roles played by the user manual is to help in solving problems with Azden IRH15C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Azden IRH15C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
