Instruction/ maintenance manual of the product IRH-10 Azden
Go to page of 6
User’s Guide INFRARED WIRELESS SYSTEM IRR-15 RECEIVER - IRB-10 BODY -P ACK - IRH-10 HANDHELD IRD-30 SENSOR Azden Corporation, 147 New Hyde Park Road, P .O. Box 10, Franklin Square, NY 1 1010 voice - 516.328.7500 • fax - 516.328.7506 • email - azdenus@azdencorp.
7 i M N O P Q R S T U V W X Y 1 2 3 4 5 3 6 IRB-10 (Top View) A C G F D E B H.
Thank you for selecting the Azden “RED” infrared system as your wireless solution. We are confident that it will perform beyond your expectations. For over 40 years Azden Corpora- tion has been creating technologically advanced products.
TABLE OF CONTENTS iii EXPLODED VIEWS ................................................................................................................. .i I NTRODUCTION ...................................................................................
4 1 RECEIVER SETUP (see illustration on page i) I. Receiver Front Panel A . Power-V olume Knob - turn the knob clockwise to turn the receiver ON and to increase the output volume level. Turn the knob counter-clockwise until it clicks to turn the receiver OFF .
2 II. Frequency Selection: The IRB-10 can be set to transmit on either one of two preset frequencies. This is so that two different speakers can talk at the same time in the same room. While it does not matter which frequency is chosen for the body-pack, two transmitters cannot share the same frequency at the same time.
An important point after buying a device Azden IRH-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Azden IRH-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Azden IRH-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Azden IRH-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Azden IRH-10 will certainly help you make a decision on the purchase.
If you already are a holder of Azden IRH-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Azden IRH-10.
However, one of the most important roles played by the user manual is to help in solving problems with Azden IRH-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Azden IRH-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
