Instruction/ maintenance manual of the product APS25b Azden
Go to page of 8
Rated Power 20 watt s cont i nuous Frequency R esponse 65Hz – 18kHz M ax SPL @ ra ted out put 101dB @ 1 m eter W oofer 5. 25" ( 133.35mm ) hi gh ef fi ci ency m agneti cal l y shi el ded Tweete.
(5) 3-Position Switch left position:OFF - Middle position:ST ANDBY - Right position:ON In the “ST ANDBY” position, the audio is muted. (6) LED Indicator Red when the switch is in “ST ANDBY” position - Green in “ON” position. (7) Audio Output Connector This 3.
page 1 page 12 Congratulations. Y ou have chosen one of the most versatile powered loudspeaker systems on the market today . The Azden ® APS 25b is a sophisticated 4-channel mixable speaker system that allows you to utilize two different wireless inputs in addition to a wired microphone and a line- level input - all at the same time if needed.
page 2 page 1 1 31XT Plug-in transmitter adaptor: Note:The 31XT is designed to turn any wired dynamic metal-body microphone that has an XLR output into a wireless microphone. Connecting the 31XT : Disconnect the microphone cable from the microphone by pushing down on the release button where the microphone and cable connect.
page 3 page 10 (6) 3-Position Switch Left position:OFF - Middle position:ST ANDBY - Right position:ON In the “ST ANDBY” position, the audio is muted. (7) LED Indicator RED when switch is in “ST ANDBY” position - GREEN in “ON” position. NOTE: Remove the battery if the transmitter will not be used for a long period of time.
page 4 page 9 Using an APS VR module and VHF T ransmitter(s)... The APS VR receiver module comes pre-adjusted to one of 30 dif- ferent VHF frequencies between 169MHz and 213MHz. The particular frequency(s) you have were chosen to not interact/interfere with TV sta- tions in your area.
Using an APS UR module and UHF T ransmitter(s)... The APS UR receiver module features 63 user-selectable frequecies within the 793-806MHz range. After installing the module (page 2) you will have to attach the antenna and position it as close to vertical as pos- sible.
6 (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered 0-8) within the selected group. Replace bottom half of microphone case and turn clockwise until snug. DO NOT OVER TIGHTEN. (4) 2-Position switch The bottom position is “Off” and the top position is “On”.
An important point after buying a device Azden APS25b (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Azden APS25b yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Azden APS25b - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Azden APS25b you will learn all the available features of the product, as well as information on its operation. The information that you get Azden APS25b will certainly help you make a decision on the purchase.
If you already are a holder of Azden APS25b, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Azden APS25b.
However, one of the most important roles played by the user manual is to help in solving problems with Azden APS25b. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Azden APS25b along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
