Instruction/ maintenance manual of the product Power Amplifier Ayre Acoustics
Go to page of 20
Ayre V-6xe Owner’s Manual Power Amplifier.
.
Table of Contents Welcome to Ayre . . . . . . . . . . . . . . . . . . . . . . . 2 Connections and Installation . . . . . . . . . . . . . . . . . . . . 3 Controls and Operation . . . . . . . . . . . . . . . . . . . . . 6 Numbers and Specifications . . .
Welcome to Ayre Your Ayre V-6xe offers a significant advance in the musical performance of high-fidelity equipment. The warmth and immediacy of a live performance are apparent from the first listening. The combination of superb resolution and a natural, relaxed quality will draw you into the music, time and time again.
Connections and Installation The Ayre V-6xe is easy to connect and use. The following guidelines will ensure that the installation goes smoothly. Location Do not stack the Ayre V-6xe directly with other components, as this may restrict the air flow or induce hum into the audio circuitry.
RCA connectors accept signals from unbalanced sources, while the XLR connectors are for balanced sources. A small toggle switch near the input connectors selects either the balanced or unbalanced inputs. When you have a choice, a balanced connection will offer slightly higher sound quality than an unbalanced connection.
Loudspeaker Outputs The heavy-duty output terminals of the Ayre V-6xe work best with speaker cables using spade lugs. The Ayre V-6xe drives the loudspeakers with balanced outputs. Since none of the output terminals are grounded, connecting any of them to ground may result in damage to the amplifier.
Controls and Operation The Ayre V-6xe has a front panel control for normal stand-alone operation. The amplifier may also be controlled via a “trigger” input in a home-theater. Power Switches The master power switch on the rear panel also incorporates a circuit breaker that acts as a resettable fuse.
In the green “Standby” mode the output stage is turned off, while the input circuitry remains powered. This allows the unit to warm up quickly for optimal sonic performance, while reducing the power consumption from 60 watts per installed channel to 20 watts.
Repeating this procedure will revert the unit back to the level-sensitive mode, as indicated by the status LED slowly flashing red (about 1 Hz). In the pulse-sensitive mode, a positive-going pulse edge will toggle the amplifier between the “Standby” and “Operate” states, duplicating the action of the front-panel switch.
Numbers and Specifications Power Output 150 watts per channel continuous into 8 ohms 300 watts per channel continuous into 4 ohms Input Impedance 100 k Ω – unbalanced inputs 200 k Ω – balanced.
10 In Case of Trouble The Ayre V-6xe provides comprehensive protection for both the amplifier and your loudspeakers, including faults that may occur in your source components. Overheating Sensors located on each audio module will shut the amplifier off if the heatsink temperature reaches 175° F (80° C).
Rail Fuses Indicator LEDs on the rear of the unit will glow red when one of the fuses blows. Please refer fuse replacement to a qualified service technician. Internal fuses on the power supply rails of each channel protect the loudspeakers from excessive current, as well as the amplifier from short-circuits.
DC Offset The Ayre V-6xe incorporates a circuit to detect the presence of DC at the output terminals. In this situation, the amplifier reverts to the red “Warm-Up” mode, and power is immediately removed from the output stage.
Statement of Warranty North American Warranty Your Ayre V-6xe amplifier is warranted against defects in workmanship and materials for a period of ninety days from the date of original purchase. This ninety-day coverage is automatic upon acceptance of delivery and no registration is required.
2. Purchaser must return the product, packed in the original shipping carton, freight prepaid to: Ayre Acoustics, Inc. 2300-B Central Avenue Boulder, Colorado 80301 or to Ayre’s authorized agent. The product must be accompanied by a written description of the defect and a photocopy of your original purchase receipt.
implied warranties, including warranties of merchantability or fitness for any particular purpose shall be strictly limited to the duration of the above warranty.
A Place for Notes Serial Number: Purchase Date: Dealer: Salesperson: ________________________________________ ________________________________________ ________________________________________ ________________________________________ 16 Rev.
.
Ayre Acoustics, Inc. 2300-B Central Avenue Boulder, Colorado 80301 www.ayre.com +1-303-442-7300.
An important point after buying a device Ayre Acoustics Power Amplifier (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ayre Acoustics Power Amplifier yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ayre Acoustics Power Amplifier - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ayre Acoustics Power Amplifier you will learn all the available features of the product, as well as information on its operation. The information that you get Ayre Acoustics Power Amplifier will certainly help you make a decision on the purchase.
If you already are a holder of Ayre Acoustics Power Amplifier, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ayre Acoustics Power Amplifier.
However, one of the most important roles played by the user manual is to help in solving problems with Ayre Acoustics Power Amplifier. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ayre Acoustics Power Amplifier along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
