Instruction/ maintenance manual of the product BKAM-103 Sony
Go to page of 10
AUDIO MONITOR SPEAKER SYSTEM AMS-100 ANALOG MODULE BKAM-101 AES/EBU MODULE BKAM-102 SDI MODULE BKAM-103 INST ALLA TION MANUAL 1st Edition.
! W ARNING This manual is intended for qualified service personnel only . T o reduce the risk of electric shock, fire or injury , do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
1-1(E) AMS-100 1-1. Power Supply 1-1-1. Power Specifications Power voltage AC 100 to 240 V ± 10 % Current consumption 25 W Inrush current 20 A 1-1-2. Power Cord w Use the specified power cord only when connecting. Never use a injured power cord. n Ground the unit safely.
1-2(E) AMS-100 1-2. Dimensions 1-3. Installation of Boards The optional boards (BKAM-101/102/103) can be installed in any slots of the AMS-100. Installation of optional boards 350 5 424 465 482 Unit : mm 1-2. Dimensions 1-3. Installation of Boards 1. Turn off the power of the AMS-100.
1-3(E) AMS-100 1-4. Rack Mounting The AMS-100 can be mounted in a 19-inch standard rack. n . If the AMS-100 or the peripheral equipment is mounted in a 19-inch standard rack, it is recommended to install a ventilation fan to prevent a temperature rise in the rack.
1-4(E) AMS-100 4. To mount the unit on the rack, while pressing the stoppers of the inner rails, slide the inner rails fully into the outer rails. 5. After confirming that the unit can be moved smoothly, tighten the six screws run in but not tightened in procedure 3.
1-5(E) AMS-100 1-6. Matching Connectors and Cables When connecting cables to various connectors on the rear panel at the time of installing or servicing, connect the following connectors/cables or their equivalents. Connector Matching Connector/cable Panel indication Connector/Cable Sony Part No.
1-6(E) AMS-100 1-8. Input Level Meter Adjustment Preparation . Input the reference signal to the unit: When the BKAM-101 is attached : + 4 dBm When the BKAM-102 is attached : _ 20 dB FS . Turn on the power of the unit and select the slot and the channel to which the reference signal is to be input on the INPUT SELECT operation panel.
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual.
Printed in Japan Sony Corporation 1999. 2 11 Broadcasting & Professional Systems Company ©1999 AMS-100 (SY) BKAM-101 (SY) BKAM-102 (SY) BKAM-103 (SY) J, E 3-202-309-01.
An important point after buying a device Sony BKAM-103 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony BKAM-103 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony BKAM-103 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony BKAM-103 you will learn all the available features of the product, as well as information on its operation. The information that you get Sony BKAM-103 will certainly help you make a decision on the purchase.
If you already are a holder of Sony BKAM-103, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony BKAM-103.
However, one of the most important roles played by the user manual is to help in solving problems with Sony BKAM-103. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony BKAM-103 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
