Instruction/ maintenance manual of the product ABTI-GM4 Axxess
Go to page of 8
ABTI-GM4 ABTI-GM4 1-800-221-0932 © COPYRIGHT 2007-2008 METRA ELECTRONICS CORPORA TION www .axx essinterface.com GM LAN INTERF A CE FOR HANDSFREE BLUETOOTH CAR KITS IThe ABTI-GM4 is designed to integrate a Handsfree Bluetooth Car Kit into General Motors vehi- c les that have the LAN data system.
ABTI-GM4 1 * READ IMPOR T ANT WARNING BEFORE A TTEMPTING ANY INST ALLA TION * IMPORT ANT W ARNING THIS PRODUCT INCLUDES INSTR UCTIONS FOR INST ALLA TION WHICH MUST BE CAREFULL Y FOLLOWED. THE INSTRUCTIONS ARE WORDED IN SUCH A MANNER TO ASSUME THA T THE INST ALLER IS CAP ABLE OF COMPLETING THESE TYPE OF ELEC- TRONICINST ALLA TIONS.
ABTI-GM4 2 INST ALLING THE ABTI-GM4 WITH THE MOTOROLA IHF1000 Note: 8-W ay to 8-Way connector harness is used in this application. NO TE: The ISO to 8 way connector harness will NO T be used in this application. INST ALLA TION PROCEDURE 1) Disconnect the vehicle battery .
ABTI-GM4 3 3) Insert the 14 pin plug on the ABTI-GM4 cable into the rear of the radio. 4) Insert the 16 pin plug on the ABTI-GM4 cable into the rear of the radio.
ABTI-GM4 4 5) Connect the 14 pin cap on the ABTI-GM4 cable to the 14 pin plug connected to the vehic le (the connector that was removed from the back of the radio). 6) Connect the 16 pin ca p on the ABTI-GM4 cable to the 16 pin plug connected to the vehicle (the connector that was removed from the back of the radio).
ABTI-GM4 5 8) Connect the white 8 pin plug on the IHF-1000 cable to the ABTI-GM4 po wer cable, and con- nect the other end of the power cable to the ABTI-GM4 module. 9) Install the IHF-1000 keypad on the dashboard of the vehic le, and route the wire to the IHF- 1000 harness.
6 ABTI-GM4 9 ) Plug the ISO side of the ISO to 8 way harness into the mating Parrot connectors. 10 ) T ake the Mute wire of the P arrot kit and plug it into the “Mute 1” wire in the Parrot ISO harness. 11 ) F inish installing the rest of the Parrot handsfree kit and reinstall the OEM radio.
ABTI-GM4 INSTRUCTIONS 1-800-221-0932 REV . 09/03/08 © COPYRIGHT 2007-2008 METRA ELECTRONICS CORPORA TION INSTABTI-GM4 www .axx essinterface.com.
An important point after buying a device Axxess ABTI-GM4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axxess ABTI-GM4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axxess ABTI-GM4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axxess ABTI-GM4 you will learn all the available features of the product, as well as information on its operation. The information that you get Axxess ABTI-GM4 will certainly help you make a decision on the purchase.
If you already are a holder of Axxess ABTI-GM4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axxess ABTI-GM4.
However, one of the most important roles played by the user manual is to help in solving problems with Axxess ABTI-GM4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axxess ABTI-GM4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
