Instruction/ maintenance manual of the product 2-190-733-11 (1) Sony
Go to page of 33
SRP-X500P © 2004 Sony Corporation 2-190-733- 11 (1) SRP-X500P Manager User’s Guide Software Versi on 1.0 Before us ing the s oftware, please rea d this U ser’s Gu ide and the Oper ating Ins tructions of the SRP-X500P Digita l Powered Mixe r thoroughl y and reta in them for fu ture referen ce.
2 Table of Content s Overvie w ............. ......... .............. .............. .............. .............. ... 3 Features .................................................................................. .... 3 Using the supplied CD-ROM .....
3 Overv iew Overvi ew Features The SRP-X50 0P Manager is a pr ogram which allows you to make p arameter setti ngs for the SRP- X500P Digital Powered Mi xer. V arious effector settings Detailed sett ings on e qualizer, auto matic ga in control, compressor, et c.
4 Preparat ion Preparat ion Installi ng the SRP-X500 P Manager 1 Insert the supplied CD-R OM into the CD-ROM drive of the personal computer. 2 Open the SRP- X500P Manager English fo lder double -click the Setup ico n. “Welcome to t he SRP-X500P Manager setu p wizard.
5 Names an d Funct ions of Con trols o n Screen Names and Funct ions of Controls on Screen Common operation secti on The controls sh own below appear on all the screens. A Menu bar The titles of the menus are displayed. You can perform ope rations that are common to t he basic settings and each setup screen.
6 Names and Func tions of Contr ols on Screen D The index of t he selected scene n umber is displayed. E Click th e Open butt on. Save: S aves the new d ata by overwriting the exis ting data. Save as: Saves th e data under a d ifferent name. Exit: Exits the SRP-X50 0P Manag er.
7 Names an d Funct ions of Con trols o n Screen A MIC INPUT setting section a Indicators These are the i ndicators of microphone i nput. RF: Lights up green when the RF signal is input to the wireless tune r unit which is installed in the mixe r.
8 Names and Func tions of Contr ols on Screen B LINE, AV /RGB IN PUT sett ing section a TRIM indi cation Displays refe rence level spe cified by the TRI M control on the mixe r. b Level meter Displays the signa l level of each input channel . c AV/RGB SE LECTOR but tons Click to select one of the AV/RGB channels (A to E).
9 Names an d Funct ions of Con trols o n Screen Note The tot al am ount of del ay tim e to b e set for the total outpu t channel must no t exceed 160 ms (54.7 m or 181 .9 feet). For deta ils, see “DELAY amoun t setup box ” (page 13). b PROTECTION indicator Lights up red when the PROTECTION indicator o n the mixer light s up red.
10 Names and Func tions of Contr ols on Screen O VER VIEW screen The detail ed setting s on equaliz er, automa tic gain control, etc., for each c hannel can be performed.
11 Names an d Funct ions of Con trols o n Screen A Characteristics gra ph Displays th e characte ristics of th e automati c gain control. By dragging the marker with the mou se, thresh old level and ratio of the compressor and threshold level of t he gate can b e changed.
12 Names and Func tions of Contr ols on Screen Click “FR” or “EQ” to sel ect the function of equ alizer as the feedb ack reducer or the paramet ric equalizer. FR: The feedback reducer setting screen appears. When “FR” is selected, the EQ parameter 1 t o 5 columns become i nactive a nd FR SETUP butt on becomes active.
13 Names an d Funct ions of Con trols o n Screen a DELAY REMAIN ind ication The tot al am ount of del ay tim e to b e set for the total outpu t channels must not exceed 160 ms (54.7 m, or 181 .9 feet). Afte r the DELAY REMAIN indic ation s hows 0%, the amount of del ay time ca nnot be in creased.
14 Names and Func tions of Contr ols on Screen Notes • Even when t he LINK check box is checked, equal izer settings are n ot linked between the 2 channels. • When the sum of delay amount or compresso r amount exceeds the limit due to linkag e of the 2 channel s, a warning message appears.
15 Names an d Funct ions of Con trols o n Screen Lef t-cli ck to turn the equ aliz er on or off. When set to ON, this bu tton light s up green. E Equalizer pa rameter setup boxes Set the frequency, Q-value, and gain for each equalizer band. Va lues can be set by clicking on the S / s buttons or by enteri ng numerical v alue directl y.
16 Names and Func tions of Contr ols on Screen d MUTING in dicator The indicat or for the muted fader li ghts up red. e Remote fader level indication Shows the level o f the remote fa der.
17 Names an d Funct ions of Con trols o n Screen c Input le vel indic ation Shows the i nput level se tting on the mixer. Thi s is indicated o nly when a volume controller is connected t o the in put pin . d PARALLEL OUTP UT indicators Show the st atus of each ou tput pi n of the REMOTE PARALLEL connector.
18 Names and Func tions of Contr ols on Screen E Com mand inpu t sec tion Enter the c ommands to be sent fro m the mix er to the projec tor to tu rn it on, to set it to sta ndby status, or to select the inp ut channel. En ter the command as a hexade cimal number using numbe rs 0 to 9 and letters A to F.
19 About t he Mixer’s Inte rnal Preset Memory Gray: A scene file is stored. Deep gray: No scene file is stored. b INDEX indication Shows the index name of th e scene file. c FUNCTIONS in dication The functions sto red to the selected scene file light up green.
20 About th e Mixer’s Inter nal Preset Memory a : Assi gned. - : Not assigned. PR OJECT OR PRO T OCOL preset memo ry By setting the PROJECTO R PROTOCOL selector on the front pa nel of the mixer to 1 to A, you can choose th e protoc ol that cor responds with the project or or display monito r to be u sed with the mix er.
21 To Con trol th e Projec tor Whose Protocol Is No t Preset to th e Mixer •B a u d r a t e •P a r i t y b i t • POWER ON and STANDBY commands and the wait time • VIDEO, RGB, and COMPO NENT input selection command and t he wait time The input selection command for OTHER TERMI NAL is not p reset to the m ixer.
22 To Control the Projector Whose Prot ocol Is Not Prese t to the Mixer Connec ting t o proj ector For details on conn ecting the mix er to a projector, refer to the SRP-X500P Operat ing Instructions. How to set the comm unication protocol Set the communication p rotocol as f ollows.
23 To Con trol th e Projec tor Whose Protocol Is No t Preset to th e Mixer b Ente r 1 in the WAIT 1 inpu t box and e nter 9 in th e WAIT2 input box, then adjust the wait time during later operation che ck.
24 To Control the Projector Whose Prot ocol Is Not Prese t to the Mixer a Click the TE ST button in the PR OJECTOR POWER STANDBY section on the PROTOCOL SETTING screen and check that the projector enters sta ndby statu s. b Click the TE ST button in the PR OJECTOR POWER ON secti on and check that the pr ojector turns on.
25 Appendix Appendix Factor y se tt ing s (SY STE M TY PE 0) Inputs Item F actory setting MIC INPUT1-4 FEED BA CK REDUCER ON / OFF OFF FR / EQ FR LCF ON EQ1 FREQ 160Hz EQ2 FREQ 450Hz EQ3 FREQ 1.
26 Appendix R OUTING R OUTING SPEAKER OUTPUT 1 MIC LEVEL 0dB R OUTING SPEAKER OUTPUT 1 LINE L LEVEL 0dB R OUTING SPEAKER OUTPUT 1 LINE R LEVEL 0dB R OUTING SPEAKER OUTPUT 1 A V/RGB L LEVEL 0dB R OUTIN.
27 Appendix Outputs Item F actory setting SPEAKERS CH-1/2 OUTPUT F ADER 0dB OUTPUT MUTI NG OFF EQ BAND 3 BAND EQ ON / OFF OFF EQ1 FREQ 31.5Hz EQ2 FREQ 50Hz EQ3 FREQ 100Hz EQ4 FREQ 170Hz EQ5 FREQ 315Hz EQ6 FREQ 530Hz EQ7 FREQ 950Hz EQ8 FREQ 1.7kHz EQ9 FREQ 2.
28 Appendix SPEAKERS CH-3/4 OUTPUT F ADER 0dB OUTPUT MUTI NG OFF EQ BAND 3 BAND EQ ON / OFF ON:CH-3 OFF:CH-4 EQ1 FREQ 31.5Hz EQ2 FREQ 63Hz EQ3 FREQ 150Hz EQ4 FREQ 315Hz EQ5 FREQ 710Hz EQ6 FREQ 1.5kHz EQ7 FREQ 3.35kHz EQ8 FREQ 7.5kHz EQ9 FREQ 16kHz EQ10- 12 F REQ 20k Hz EQ1-12 Q 1.
29 Appendix LINE OUTPUT 1/2 OUTPUT F ADER 0dB OUTPUT MUTI NG OFF EQ BAND 0 BAND EQ ON / OFF OFF EQ1 FREQ 31.5Hz EQ2 FREQ 106Hz EQ3 FREQ 375Hz EQ4 FREQ 1.32kHz EQ5 FREQ 4.5kHz EQ6 FREQ 16kHz EQ7-12 FREQ 20kHz EQ1-6 Q 1 EQ7-12 Q 1.5 EQ1-1 2 G AI N 0dB COMPRESSOR ON / OFF OFF COMPRESSOR THRESHOLD 10dB COMPRESSOR RA TIO ∞ : 1 COMPRESSOR A TT ACK 0.
30 Appendix Remotes INDEX SPEAKER OUTPUT 1 INDEX SP 1 SPEAKER OUTPUT 2 INDEX SP 2 SPEAKER OUTPUT 3 INDEX SP 3 SPEAKER OUTPUT 4 INDEX SP 4 LINE OUTPUT 1 INDEX A UX L LINE OUTPUT 2 INDEX A UX R LINE OUT.
31 Appendix REMO TE F ADER ASSIGN MASTER INPUT ASSIGN Not assigne d. MASTER SPEAKER OUTPUT ASSIGN Assigned to SPEAKER OUT 1-4. MASTER LIN E OUTPUT A SSIGN Assigne d to LINE OU T 1/2. REMO TE 1-6 INPUT ASSIGN Not assigne d. REMO TE 1-6 SPEAKER OUTPUT ASSIGN Not assigne d.
NO TICE FOR USERS © 2004 Son y Corporation. All right s reserved. Th is manual or t he software describe d herein, in whole or in part, may not be reprodu ced, translated o r reduced to any machine readable from without prior writ ten approval from Sony C orporation .
Sony Co r por ation.
An important point after buying a device Sony 2-190-733-11 (1) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sony 2-190-733-11 (1) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sony 2-190-733-11 (1) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sony 2-190-733-11 (1) you will learn all the available features of the product, as well as information on its operation. The information that you get Sony 2-190-733-11 (1) will certainly help you make a decision on the purchase.
If you already are a holder of Sony 2-190-733-11 (1), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sony 2-190-733-11 (1).
However, one of the most important roles played by the user manual is to help in solving problems with Sony 2-190-733-11 (1). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sony 2-190-733-11 (1) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
