Instruction/ maintenance manual of the product MR1 Sonance
Go to page of 2
+12VDC GND STATUS SIGNAL EMITTERS PWR IR RCVR CB1 ONE ZONE CONNECTING BLOCK MR1 IR Receiver Red (or white) Stripe 120 V AC (Unswitched) CB1 Connecting Block PS1 Power Supply E1 Emitter E1 Emitter E1 E.
SONANCE • 212 Avenida Fabricante • San Clemente, CA 92672 www .sonance.com Pg 2 ©2002 Sonance. All rights reserved. 33-1276 12.02 While it is possible to make wired connections without the connecting block, it is not recommended.
An important point after buying a device Sonance MR1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sonance MR1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sonance MR1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sonance MR1 you will learn all the available features of the product, as well as information on its operation. The information that you get Sonance MR1 will certainly help you make a decision on the purchase.
If you already are a holder of Sonance MR1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sonance MR1.
However, one of the most important roles played by the user manual is to help in solving problems with Sonance MR1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sonance MR1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
