Instruction/ maintenance manual of the product IW-2 Sonance
Go to page of 16
Instr uction Man ual (ver . IW) IW -1 IW -2 IW -3 IW -4 IW -5.
2 iPort ver . IW Instr uction Manual Intr oduction The iPort™ In-W all Docking System allows an Apple iPod ® to become part of a whole-home audio system, and/or to be used as a source in a variety of local audio systems. Before installing and using the iPort please r ead and follow all of the instructions in this guide carefully .
3 IW-3 System Box Contents: • (1) iPort In-W all Docking System (with IR control and balanced audio capability) • (1) iPort Balanced Audio W allplate • (1) 15V DC Regulated Power Supply IW-4 Sys.
4 iPort ver . IW Instr uction Manual • The iPort has angled screw mounting holes on both sides that allow it to be installed up against a stud. (See Installing The iPort In A Wall , on page 9.) • Direct sunlight can interfer e with IR operation. Avoid installation locations that ar e in direct sunlight a portion of the da y.
5 iPort ver . IW Instr uction Manual iP or t System Connections — IW -1 / IW -2 See Figure 3 IW-1 and IW-2 systems’ unbalanced audio output is designed for use in a local-zone system where the audio equipment is locat- ed less than 2 0 feet fr om the iPort.
iPort ver . IW 3a. If the system includes a #70071 or #70072 line- level volume control, set the iPort’ s V olume Control YES/NO switch to the right ( YES ) position (volume control in system). 3b. Use 5-conductor twin-shielded wire to connect the volume control to the iPort 5-pin connector block.
7 iPort ver . IW Instr uction Manual 7. Use a stereo RCA audio cable to connect the iPort W allplate to a source input on the local-zone audio system. 8. After installing the iPort in the wall (see Installing the iPort in a Wall, page 9), plug the power supply into a wall outlet.
8 iPort ver . IW Instr uction Manual 3. Set the iPort’ s V olume Control YES/NO switch to the left (NO) position (no volume control in system). • The iPort’ s volume control cir cuit will af fect all zones in a multi-zone system. It is designed for use only in a local-zone system.
iPort ver . IW Instr uction Manual 11. For IW-5 Systems: 11a. Plug the video Cat5 cable’ s RJ-45 connectors into the Video jacks on the iPort and the RJ-45 connector on the Video W allplate, as shown above in Figure 6 . 11b. Install the iPort Video W allplate in an electrical box in the room where the audio equipment is located.
iPort ver . IW Instr uction Manual • If you ar e unsure about obstructions, drill a small hole in the center of the outline and insert a coat hanger wire into the hole to feel-ar ound for possible obstructions. 5. Cut the opening using a drywall saw .
11 iPort ver . IW Instr uction Manual • When switching-back to iPod models with a Dock Connector that are lar ger than 30GB, retract the iPort’ s center disc backwards by rotating it clockwise until you feel the first detent (see Figure 9 ).
12 iPort ver . IW Instr uction Manual iP or t Status Indication The logo on the iPort front panel serves as a status indicator (see Figure 10, on page 12).
13 iPort ver . IW Instr uction Manual T echnical Assistance and Ser vice If you any have questions about the operation or installation of this product, please call our T echnical Assistance Department at (800) 582-0772 or (949) 492-7777; from 7 a.m. to 5 p.
14 iPort ver . IW Instr uction Manual W ARRANTY CO VERA GE (U.S. ONL Y) iPort provides the following coverage for units that fail under normal use and accor ding to these instructions due to a defect .
15 iPort ver . IW Instr uction Manual.
san clemente ca | 888 . 45 . iPort | www .iportmusic.com 33-3873 05/06.
An important point after buying a device Sonance IW-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sonance IW-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sonance IW-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sonance IW-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Sonance IW-2 will certainly help you make a decision on the purchase.
If you already are a holder of Sonance IW-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sonance IW-2.
However, one of the most important roles played by the user manual is to help in solving problems with Sonance IW-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sonance IW-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
