Instruction/ maintenance manual of the product XR622 Solid State Logic
Go to page of 10
Super -Analogue™ Outboar d XR622 X-Rack Master Module User ’s Guide This documentation package contains the User ’s Guide for your new X-Rack Master module. Depending on the age of your X-Rack, these pages may already be present in your X-Rack Owner ’s Manual – please check to see if these pages match your Manual.
.
P age F-1 X-Rack Master Module F . The Master Module F .1 Introduction Used in conjunction with the XR623 X-Rack Line Return module, the XR622 X-Rack Master module provides a complete small scale mix and monitor system for studios seeking a compact solution for mixing and monitoring in the analogue domain.
P age F-2 X-Rack Owner’ s Manual F .3.2 Monitor Section The Monitor Section enables the Mix and Record busses or a ster eo external input to be monitored, the sour ce to monitor being set by either the ‘MIX’, ‘REC’ or ‘EXT’ switches either seperately or together , allowing great flexibility in recor ding and montitoring signals.
P age F-3 X-Rack Master Module • Use the D-Pot to select ‘ le ’ (MIDI Remote Learn) and press SA VE to enable learn mode. • Operate any one of the ‘soft’ controls on the XR622 Master module. This will cause the LED of the selected control to flash (the ‘ SEL ’ LED will flash if either of the potentiomenters have been chosen).
P age F-4 X-Rack Owner’ s Manual F .4 Performance Specification T he following page contains audio performance specification figures for the X-Rack Master modul e. No o ther Solid State Logic products ar e covered by this document and the performance of other Solid State L ogic products can not be inferr ed from the data contained her ein.
P age F-5 X-Rack Master Module F .5 Calibration Information T he X-Rack Master module is factory calibrated and should only need calibration if a potentiometer or o ther component has been replaced or if it is suspected that ther e is a problem with calibration.
P age F-6 X-Rack Owner’ s Manual F .6 Connector Details Headphones Location: Front Panel Conn’ T ype: Stereo 1/4" Jack Socket Pin Description T ip Left Ring Sleeve 0V PL2 Location: Internal C.
P age F-7 X-Rack Master Module F .7 Physical Specification * D epth: 200mm / 7.9 inches including front panel knobs, excluding connectors 2 75mm / 10.9 inches including front panel knobs and connectors H eight: 171mm / 6.75 inches W idth: 35mm / 1.4 inches front/r ear panels 49mm / 1.
P age F-8 X-Rack Owner’ s Manual.
An important point after buying a device Solid State Logic XR622 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Solid State Logic XR622 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Solid State Logic XR622 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Solid State Logic XR622 you will learn all the available features of the product, as well as information on its operation. The information that you get Solid State Logic XR622 will certainly help you make a decision on the purchase.
If you already are a holder of Solid State Logic XR622, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Solid State Logic XR622.
However, one of the most important roles played by the user manual is to help in solving problems with Solid State Logic XR622. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Solid State Logic XR622 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
