Instruction/ maintenance manual of the product X-Rack E Series Solid State Logic
Go to page of 10
Super -Analogue™ Outboar d X-Rack E Series EQ User ’s Guide This documentation package contains the User ’s Guide for your new X-Rack E Series EQ module. Depending on the age of your X-Rack, these pages may already be pr esent in your X-Rack Owner ’s Manual – please check to see if these pages match your Manual.
.
P age K-1 X-Rack E Series EQ Module K. E Series EQ Module K.1 Connection The module input and output gains can be set to operate at a nominal level of either +4dBu or –10dBV , using a switch on the connector panel. T o select the appropriate level for the equipment you are connecting to, please check the operating manual for your mixer or DA W .
P age K-2 X-Rack Owner’ s Manual.
P age K-3 X-Rack E Series EQ Module K.3 Performance Specification The following pages contain audio performance specification figur es for the X-Rack E Series EQ Module. N o other Solid State Logic products ar e covered by this document and the performance of other Solid State L ogic products can not be inferr ed from the data contained herein.
P age K-4 X-Rack Owner’ s Manual K .3.4 Controls This is a four band equaliser that can be switched between two differ ent sets of curves; one based on SSL ’s ‘02’ (‘Brown Knob’) EQ and the other based on the latest version of the classic ‘242’ E Series (‘Black Knob’) EQ.
P age K-5 X-Rack E Series EQ Module K.4 Calibration Information The X-Rack E Series EQ module is factory calibrated and should only need calibration if a potentiometer o r other component has been replaced or if it is suspected that ther e is a problem with calibration.
P age K-6 X-Rack Owner’ s Manual 4 . Switch BLK in and re-adjust LMF Fr equency for maximum level. 5. Adjust VR16 for +18dBu ±0.25dB. 6. Reset LMF Gain to its centre indent position and r elease the BLK switch. Re-check the audio level meter for 0dBu.
K.5 Connector Details K.6 Physical Specification Depth: 200mm / 7.9 inches including front panel knobs, excluding connectors 275mm / 10.9 inches including front panel knobs and connectors Height: 171mm / 6.75 inches W idth: 35mm / 1.4 inches front/r ear panels 49mm / 1.
P age K-8 X-Rack Owner’ s Manual.
An important point after buying a device Solid State Logic X-Rack E Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Solid State Logic X-Rack E Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Solid State Logic X-Rack E Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Solid State Logic X-Rack E Series you will learn all the available features of the product, as well as information on its operation. The information that you get Solid State Logic X-Rack E Series will certainly help you make a decision on the purchase.
If you already are a holder of Solid State Logic X-Rack E Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Solid State Logic X-Rack E Series.
However, one of the most important roles played by the user manual is to help in solving problems with Solid State Logic X-Rack E Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Solid State Logic X-Rack E Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
