Instruction/ maintenance manual of the product C200 Solid State Logic
Go to page of 2
Solid State Logic C200 Quick Start Routing Guide W elcome to the C200 digital production console. This document is intended primarily as a straightforwar d guide to routing signals, and also gives some useful shortcuts. The console has an in-line design, with two faders per channel strip, small fader (SF) and large fader (LF).
W ith signal routed onto the main busses, you need to choose how those busses will be submixed to the 5.1 output of the console. Stabbing the MIX SETUP then Main Mix menu boxes on-screen will bring up the mix matrix: The 12 main busses feed the matrix from the top, and any crosspoints (yellow) r oute those signals out to the MIX 5.
An important point after buying a device Solid State Logic C200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Solid State Logic C200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Solid State Logic C200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Solid State Logic C200 you will learn all the available features of the product, as well as information on its operation. The information that you get Solid State Logic C200 will certainly help you make a decision on the purchase.
If you already are a holder of Solid State Logic C200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Solid State Logic C200.
However, one of the most important roles played by the user manual is to help in solving problems with Solid State Logic C200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Solid State Logic C200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
