Instruction/ maintenance manual of the product SG-TTW-12ESEZ-26 Soleus Air
Go to page of 17
Electronic Through the W all Air Conditioner Operating Instructions Models SG-TTW -09ESE-26 SG-TTW -09HC-26 SG-TTW -12HC-26 SG-TTW-12ESEZ-26 V.130329.
Conten t s IM P OR T AN T NO TE T O TH E OW N ER ........................... 1 IM POR T AN T NO TE T O TH E SER V IC ER .. ....... ....... ....... 1 Unit Fe ature s ................................................................ 1 T ransport ation Dam age .
Specifications • Noise level is measured at a distance of 3.28ft away from the front of the unit in cooling mode. • Power consumption is measured when the fan runs at the highest speed settings. • These specifications are for reference only. For actual data, please refer to the rating label on the unit.
IMPORT ANT NOTE T O THE OWNER This equipment is to be serviced by professionally trained personnel only. If this equipment is improperly installed, adjusted or altered by an unqualified person, a safety hazard may result.
WARNING To prevent electrical shock, property damage, personal injury, or death, do not remove grounding prong from plug. Follow all operating instructions.
Figure 3 3. Remove shipping pads inside air conditioner next to compressor. (See Figure B.) Remove shi p pin g pads Figure B 4. Carefully slide the chassis into the sleeve. Ensure that the ground wire is not pinched or in the path of the condenser fan.
T a b To replace front grille: Hook the tabs on the front grille even with the tabs on the case and snap into place. Replace the screws and filter. Refer to Page 4, Figure A. VENT CONTROL AND AIR DIRECTION (See Figure E) The vent control is located behind the front grille on the right side of the air discharge area.
DISCHARGE AIR GRILLE Remove the front grille to adjust the vertical louvers side-to- side to direct the air left or right. Figure 5 IMPORTANT NOTES: 1. The unit is equipped with a rubber-grommet-mounted compressor. These grommets are factory set and require no adjustment.
Air Conditioner Features LOWERS T EMPERATURE OR TIME RAISES TEMPERATURE OR TIME SETS FAN SPEED SETS MODE SLEEP MODE LOWERS TEMPERATURE OR TIME RAISES TEMPERATURE OR TIME SETS FAN SPEED SETS MODE DISPL.
OPERA TING THE REMOTE CONTROL • The swing bu tton turns on louv er oscillation. • Press the ON/OFF button to tu rn the A/C on or off. When t he unit is turned off, the Timer and slee p functions will be cancelled. The set temperat u re will be saved.
OPERA TING THE REMOTE CONTROL • Press the “+” butto n to increase the temperature w h en the unit is on. Press and hold the “+” b utton for more than 2 seconds to q uickly cycle through the temperature options. Stop pressing th e b utton when the desired temperatu re is displayed.
Introduction for special function 1 . To power on the unit , p r e ss the ON /O F F bu t t on. Th e u ni t wi ll s ta r t t o r un . ( N o te : W h en it is powered off, the louvers will close automatically.
Air Conditioner Features (continued) TO TURN UNIT ON: YOU WILL SEE: DO THIS: PRESS ON/OFF BUTTON TO CHANGE TEMPERATURE SETTING: YOU WILL SEE: DO THIS: PRESS TO RAISE PRESS TO LOWER ° ° If you want the display to read the actual room temperature, s elect the F an O nly mode.
YOU WILL SEE : T O O PER A T E O N F A N O N L Y : DO THIS: PRESS MODE BUT T ON CHOOSE F A N ON L Y LIGHT ON Note: Use this function only when cooling is not desired but room air circulation is needed. You can choose any fan speed you prefer, EXCEPT AUTO FAN.
Air Conditioner Features (continued) HEA TING FEA TURE (on some models) : YOU WILL SEE : If the display reads “ F 1 ” a sensor has failed. If the display reads “ F 2 ” a sensor has failed. If the display reads “ F 4 ” a sensor has failed. If the display reads “ F J ” a sensor has failed.
COMPRESSOR The compressor is hermetically sealed, permanently lubri- cated and requires no additional oiling. FRONT PANEL AND GRILLE The front panel and grille can be cleaned with a mild soap or detergent. Do not use hydrocarbon-based cleaners (e.g. acetone, benzene, naphtha, gasoline, etc.
W ARRANTY One Year Limited Warranty Soleus International, Inc. warrants the accomp anying Soleus Air Powered by Gree Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE ( 1) year from the date of original retail purchase in the United States.
An important point after buying a device Soleus Air SG-TTW-12ESEZ-26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soleus Air SG-TTW-12ESEZ-26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soleus Air SG-TTW-12ESEZ-26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soleus Air SG-TTW-12ESEZ-26 you will learn all the available features of the product, as well as information on its operation. The information that you get Soleus Air SG-TTW-12ESEZ-26 will certainly help you make a decision on the purchase.
If you already are a holder of Soleus Air SG-TTW-12ESEZ-26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soleus Air SG-TTW-12ESEZ-26.
However, one of the most important roles played by the user manual is to help in solving problems with Soleus Air SG-TTW-12ESEZ-26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soleus Air SG-TTW-12ESEZ-26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
