Instruction/ maintenance manual of the product PH4-13R-01 Soleus Air
Go to page of 17
Port able Air Conditioner with Heat Pump T echnology Operating Instructions 3092402 Model N o. :PH4-13R-01 Reference No.: LX-135DHP V.130110.
Thank you for choosing a Soleus Air Portable Air Conditioner with Heat Pump Technology. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product.
3 SPEC IFICA TIONS • The cooling capacity is m easured at an ambi ent tem perature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode. • Power consum ption is m easured when t he fan runs at t he highest spee d setting.
4 LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detec tion and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the lo ad side and a LCDI attachm ent plug on the line side.
5 P ARTS & ASSEMBL Y PARTS EXHAUST HOSES WINDOW KIT ASSEMBLY & INSTALLATION INSTALLATION When the unit is operating as an air conditioner, heater, or dehum idifier, the unit draws in fresh outdoor air and exhausts hot air (in AC or dehumidifier mode) or cool air (in Heat m ode) out of the room to com plete the air exchange.
6 DUAL HOSE WINDOW KIT INSTA LLATION - To quickly and efficiently cool a large area. NOTE: The air conditioner in the images below may diffe r from the air conditioner you purchased. These images are for your reference and show how to connect any Soleus Air dual hose air conditioner.
7 WINDOW KIT ASSEMBLY 1 . Parts : A) 2 Track Screws B) 2 Wing Nuts C1 & C2) 2 Hose Panels, one with Two Exhaust Hose Openings D) 1 Sliding Track Panel 2. Assembly: First, take the Track Screws (A) and screw one into each of the small holes found on the Hose Panels (C1 & C2).
8 SINGLE HOSE EXHAUST & WINDOW KIT INST ALLATION When you want quick spot cooling, install the PH4-13R -01 using the single hose window kit installation. For Single Hose Installation Install only the left exhaust hose over the circular air outlet (this outlet will be on the left side of the unit when you are facing the back of the unit).
9 CONTROL P ANEL, DISPLA Y , & OPERA TING INSTRUCTIONS CONTROL PANEL & MULTI-COLOR DISPLAY CONTROL PANEL MULTI-COLOR DISPLAY POWER BUTTON MODE BUTTON TIMER BUTTONS TEMP & TIMER SELECTION FAN SPEED BUTTON TEMP SELECT AUTO A/C DEHUM.
10 OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Refer to the images on page 9) 1) Power On and Off - Press the POWER button once to manually turn the unit on.
11 NOTE: During hot days, the unit will cool the room most efficiently by setting the te mperature at the lowest setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and window kit, and keeping direct sunlight to a mi nimum will also improve the cooling efficiency.
12 Auto Mode 1) Install the exhaust hoses a nd window kit properly (see pages 6 , 7 & 8). 2) Plug the Power Cord into an electrical outlet. 3) Turn on the unit by pressing the POWER button on the control panel. 4) Press the MODE button until the “ ” icon appears on the control panel disp lay.
13 Emergency Condensate Holding Tank When the room temperature is low and the indoor hum id ity is high, the air conditioner may not be able to evaporate some of the moisture fast enough. W hen this happens, the water will accumulate in an emergency condensate tank inside the unit.
14 REMOTE CONTROL TIMER ON TIMER OFF LCD DISPLAY POWER BUTTON MINUTE SELECTER SLEEP BUTTON HOUR SELECTER TEMP SETTING MODE BUTTON FAN SPEED SWING (LOUVER OSCILLATION) OPERA TING THE UNIT USING THE REM.
15 REMOTE CONTROL OPERATING INSTRUCTIONS 1) Power On and Off - If the unit is already on, press the POWER ( I/O ) button on the rem ote while pointing the remote away from the unit. This will tu rn the remote on. If the unit is off, now press the POWER ( I/O ) button once to manually turn th e unit on.
16 MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an el ectrical outlet prior to performing any maintenance on the unit. Clean or replace filter - If the air filter is blocked with a dust, the airflow volum e may reduce.
17 W ARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Ai r Portable Air Conditioner with Heat Pump to be free of defects in material and workmanship for the applications sp ecified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States.
An important point after buying a device Soleus Air PH4-13R-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soleus Air PH4-13R-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soleus Air PH4-13R-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soleus Air PH4-13R-01 you will learn all the available features of the product, as well as information on its operation. The information that you get Soleus Air PH4-13R-01 will certainly help you make a decision on the purchase.
If you already are a holder of Soleus Air PH4-13R-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soleus Air PH4-13R-01.
However, one of the most important roles played by the user manual is to help in solving problems with Soleus Air PH4-13R-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soleus Air PH4-13R-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
