Instruction/ maintenance manual of the product PH3-10R Soleus Air
Go to page of 16
© 2006 Soleus Air International Portable Air Conditioner and Heater With Heat Pump T echnology PH3-09R-03 / PH3-10R-03 Operating Instructions Model No.
2 Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide you with valuable informati on necessary for the proper care and main tenance of your new product.
3 SPEC IFICA TIO NS • The cooling capacity is m easured at an am bient temperature of DB 86 °F, WB 78 °F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in coolin g m ode. • Power consum ption is measur ed when the fa n runs at the highe st speed setti ng.
4 PRODUCT DIAGRAM (Actual product design may differ slightly from images below) FRONT A. Control panel B. Vertical air louvers C. Air outlet D. Horizontal air louvers E.
5 INST ALLA TION SELECTING THE LOCATION Place the unit in a flat location where the air out- lets are not obstructed. Place the unit at least 20” (50cm) away from a wall or other obstacle. MOUNTING THE EXHAUST HOSE Slide the square end of the exhaust duct over the hot air outlet on the back of the unit.
6 LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detec tion and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the lo ad side and a LCDI attachm ent plug on the line side.
7 WINDOW KIT INSTALLATION The window kit is designed to fit into most standard vertical and horizontal windows, as well as some sliding glass doors. However, it may be necessary to modify some aspects of the installation process for certain window types.
8 WINDOW KIT INST ALLA TION (cont’d) NOTE: The Portable Air Cond itioner above may differ from the un it de scribed in this manual. The above direction s and images show general directions for all Soleus Air single hose portable air conditioners.
9 MULTI-COLOR DISPLAY A. Auto Mode B. Cool Mode C. Dehumidify Mode D. Fan Mode E. Heat Mode F. Fan Speed (Low, High, Me- dium) G. Temperature H. Swing Mode I.
10 OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Re fer to the images on page 9) 1) Power On and Off - Press the POWER button once to manually turn the unit on.
11 OPERA TING THE UNIT USING THE CONT ROL P ANE L Air Conditioner Mode 1) Install the exhaust hose and window kit properly (see pages 7 & 8). 2) Plug the Power Cord into an electrical outlet. 3) Turn on the unit by pressing the POWER button on the control panel.
12 room. NOTE: It is not necessary for the exhaust hoses and window k it to be installed to opera te the unit in fan m ode. Heat Mode 1) Install the exhaust hoses and window kit properly (see pages 7 & 8). 2) Plug the power cord into a grounded outlet.
13 Compressor Indicator The “ ” icon will light up on the control panel disp lay when the compressor turns on. The “ ” icon will turn off when the compressor shuts off. Emergency Condensate Holding Tank When the unit is in cooling mode, unwanted water is extracted from the air.
14 REMOTE CONTROL TIMER/TEMP INCREASE FAN SPEED POWER BUTTON TIMER BUTTON TIMER/TEMP DECREASE SLEEP MODE MODE BUTTON °C /°F BUTTON SWING (LOUVER OSCILLATION) OPERA TING THE UNIT USING THE REMOTE CONTROL REMOTE CONTROL OPERATING INSTRUCTIONS 1) Power On and Off - Press the ON/OFF button on the remote to turn the unit on or of f.
15 MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an el ectrical outlet prior to performing any maintenance on the unit. Clean or replace filter - If the air filter is blocked with a dust, the airflow volum e may reduce.
16 W ARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying So leus Air PH3-09R-03 / PH3-10R -03 Portable Air Conditioner with Heat Pump technology to be free of defects.
An important point after buying a device Soleus Air PH3-10R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soleus Air PH3-10R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soleus Air PH3-10R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soleus Air PH3-10R you will learn all the available features of the product, as well as information on its operation. The information that you get Soleus Air PH3-10R will certainly help you make a decision on the purchase.
If you already are a holder of Soleus Air PH3-10R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soleus Air PH3-10R.
However, one of the most important roles played by the user manual is to help in solving problems with Soleus Air PH3-10R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soleus Air PH3-10R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
