Instruction/ maintenance manual of the product KY-320 Soleus Air
Go to page of 20
.
T ABLE OF CONTENTS INTRODUCTION 1 IMPORT ANT SAFEGUARDS 1 P ACKAGE CONT AINS: 1 NAMES OF P ARTS 2 INST ALLA TION BEFORE USE 3 CONTROL P ANEL AND LCD DISPLA Y 5 CONTROL PANEL FUNCTIONS 6 OPERA TION USI.
1 INTRODUCTION Thank you for purchasing the Soleus Air KY32U portable air-conditioner . This unit is designed for improving living and working comfort by providing cooling, dehumidifying and fan functions only with a minimum installation required.
2 NAMES OF P ARTS Front V iew Back V iew control panel upper air outlet handle lower air inlet grille Signal Receptor upper air inlet grill with filter power cord hot air exhaust outlet lower air inle.
3 Exhaust Duct W indow Kits INST ALLA TION BEFORE USE 1) Condensate W ater T ank Float Lid Y ou must install the water tank float lid before first use of the portable air conditioner following these procedures: a) Hold the water tank and draw it out slowly .
4 water tank float lid should be able to move up and down freely after correct installment. d) Insert the complete water tank back to the air conditioner unit. 2) Exhaust Duct When you use the unit as an air conditioner , the hot exhaust air must be directed out of the room.
5 f ) Use screws on the window kit extension if necessary . NOTE: When using the window kit on a window or sliding door it will cause the window or sliding door not to be properly closed and locked.
6 Control Panel Functions 1) Power On/Off Control Starts or Stops the Unit 2) Mode Control Select the functions of the unit for: Fan only Air Conditioning onlyDehumidifying only Auto Control 3) Fan Sp.
7 OPERA TION USING CONTROL P ANEL 1) Cooling Operation a) Be sure that the drain tank is properly placed in the unit. b) Install the exhaust duct properly . c) Plug the Power Cord to the power outlet. d) T urn on the unit by pressing the On/Off Button on the control panel.
8 NOTE: Do not use the exhaust duct when the unit is running at dehumidifying model. Y ou must remove the exhaust duct from the unit. When the unit is running at dehumidifying mode, the fan speed cannot be adjusted. Keep the windows and the doors closed to aid the effectiveness of the unit in removing the moisture from the room.
9 REMOTE CONTROLLER 1) Set Clock a) Press On/Off key to turn on the remote controller b) Press left side (Hour) or right side (Minute) of the T ime Adjustment key until the LCD displays the correct time.
10 d) Press the Fan Speed key until the LCD displays the desired fan speed. e) Press the T ransmit key . NOTE: When pressing the Mode Key , the LCD displays “COOL”, “F AN” AND “HEA T”.
11 7) Sleep Mode a) Press the On/Off key to turn on the remote controller . b) Press the Sleep key . “Sleep” will appear on the LCD display . c ) Press either / of / key of the T emperature key until the LCD displays the desired temperature. d) Press the Fan Speed key until the LCD displays the desired fan speed.
12 mode, condensate water does not go to the internal water tank. Condensate is discharged by gravity through the drainage tubing to either an external tank (not provided) or to a condensate water pump device (Optional Item).
13 maintenance activities. 1) Clean or replace filter If the air filter is blocked with a lot of dust, the airflow volume will reduce. It is recommended to clean the filter once every two weeks or as needed. a) Push down the two tabs on the filter cover and pull outwards to remove the entire filter and cover .
14 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE REMEDY Unit does not operate Unit is unplugged Securely plug receptacle into the power outlet Drain tank is full Empty water tank W ater tank not installed co.
15 TECHNICAL SPECIFICA TIONS NOTE: 1 ) The above cooling capacity is measured at ambient temperature of DB 86 F , WB 78 F . 2 ) Noise level is measured at the point where is 3.28 ft away from the front of the unit, in cooling mode. 3 ) Power consumption is measured when fan runs at the highest speed Specifications above are for reference only .
16 ELECTRIC PRINCIPLE DRA WING KY-32U.
17 W ARRANTY ONE YEAR LIMITED W ARRANTY Soleus International Inc. warrants the accompanying Soleus Air KY-32U Mobile Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States or Canada.
18 LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side.
An important point after buying a device Soleus Air KY-320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soleus Air KY-320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soleus Air KY-320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soleus Air KY-320 you will learn all the available features of the product, as well as information on its operation. The information that you get Soleus Air KY-320 will certainly help you make a decision on the purchase.
If you already are a holder of Soleus Air KY-320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soleus Air KY-320.
However, one of the most important roles played by the user manual is to help in solving problems with Soleus Air KY-320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soleus Air KY-320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
