Instruction/ maintenance manual of the product KFR/KFS Series Soleus Air
Go to page of 32
.
Safety Precautions .......................................................................................... 1 Identification of parts ...................................................................................... 2 Indoor Unit / Operation and display .
Do not turn off the power supply cir- cuit breaker or pull out the unit power cord during unit operation. This may cause electrical hazards and/ or a fire. Keep the power supply circuit breaker and power plug free from any type of debris. If using a power supply cord, be sure to connect to plug firmly.
.
- 3 -.
.
.
.
.
.
- 9 -.
- 10 -.
.
.
.
- 14 -.
Specifications are subject to change without prior notice. Visit our website - www.soleusair.com Copyright 2003 Soleus International Inc. PERFORMANCE RATINGS MODEL Capacity Cooling [BTU/h] Capacity He.
- 16 -.
Outdoor unit installation location: l Outdoor unit location must be well ventilated. Avoid installing where any type of flammable gas could leak. l Proper clearances must be maintained per instructions on page 16. l The maximum length for refrigeration lines is 49 ft.
Installation instructions 3. Indoor unit refrigeration line installation l The refrigeration lines and wiring can be routed to the outdoor unit in a number of ways (left or right from the back of the unit), by using the cut-out access pieces on the casing of the unit.
- 19 -.
Suppport plate Hook Hook Mounting the Indoor unit to the Mounting Plate: l Hook the indoor unit onto the upper portion of the mounting plate by connecting the hooks at the rear top of the indoor unit with the upper edge of the mounting plate.
Installation instructions Outdoor unit installation 1. Install the outdoor unit l Outdoor unit must be mounted on a solid, level foundation. If possible, affix unit using bolts to the foundation.
Installation instructions 3. Wiring connection l Remove the electrical cover of outdoor unit (1 screw). l Connect wires as shown below in the illustrations.
Installation instructions System Start Up and Charge Adjustment Procedures The outdoor unit is supplied with a R-22 charge sufficient for 15 feet of refrigeration tubing. The outdoor unit’s liquid and suction valves are closed to contain the charge within the unit.
HOW TO INSTALL DRAIN ACCESSORIES There will be some water dripping from the condenser when the heat pump is working during the heating mode. Two drain caps, a drain elbow with rubber collar and a plastic hose (5/8” x 6”) are supplied for user’s choice.
- 25 -.
- 26 -.
.
USE COPPER WIRES ONLY FOR POWER SUPPLY. WARNING:RISK OF ELECTRIC SHOCK CAN CAUSE INJURY OR DEATH. DISCONNECT ALL ELECTRIC POWER SUPPLIES BEFORE SERVICING. DURING CONNECTION OF THE REFRIGERATION TUBES, IF EXCESSIVE TORQUE IS IMPOSED ON FLARE NUTS, SERVICE VALVE ON DISCHARGE LINE MAY BE DAMAGED.
- 29 -.
Troubleshooting RUN light blinks Defect What to check 1 time 2 times 3 times 4 times Continuous blink Abnormality of room temperature sensor. Abnormality of defrost sensor. Abnormality of indoor fan motor. Abnormality of outdoor unit. No defect-unit in defrost mode.
An important point after buying a device Soleus Air KFR/KFS Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soleus Air KFR/KFS Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soleus Air KFR/KFS Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soleus Air KFR/KFS Series you will learn all the available features of the product, as well as information on its operation. The information that you get Soleus Air KFR/KFS Series will certainly help you make a decision on the purchase.
If you already are a holder of Soleus Air KFR/KFS Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soleus Air KFR/KFS Series.
However, one of the most important roles played by the user manual is to help in solving problems with Soleus Air KFR/KFS Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soleus Air KFR/KFS Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
