Instruction/ maintenance manual of the product HI1-50-03 Soleus Air
Go to page of 12
HI1-50-03 © 2010 Soleus Air International HI1-50-03 Industrial Utility Heater 3092402.
Thank you for choosing a Soleus Air Utility Heater . This owner ’ s manual will provide you with valuable information necessary for the proper care and maintenanc e of your ne w product. Please take a few moments to thoroughly read th e instructions and familiarize yourself with all the operational aspects of your new heater .
on soft surfaces, like a bed, where openings may becom e blocked. 12. A heater has hot and arcing or sparking parts in side. DO NOT use in areas where gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open flames.
1. Use Copper wire only rated at least 60°C (140°F) 2. For supply connections use No.10 AWG or larg er wires suitable for at least 60°C (140°F) 3. Heater air flow must be directed pa rallel to, or away f rom, adjacent walls. 4. Observe wall, floor, and ceiling clearan ce requirements on DIAGRAM 1 on Page 6 of this manual.
SPEC IFICA TIONS Voltage Rating / Amps 208V-240 V / 21 Amps / Single Phase Power Consum ption 5000 Watts Unit Size 15.7 inches. (W) x 11.29 inch es. (D) x 14.
HEA TER LOCA TION AND INST ALLA TION Install the heater out of traffic areas m aintaining the requ ired clearances be low. The direction of air flow shold not be restricted by anything and the air flow should not blow directly at exposed wa lls.
LOCA TI ON AND INST ALLA TION (CONT .) MOUNTING THE BRACKET 1. Locate a stud in the ceiling joist. 2. Remove the mounting bracket from the heat ing unit be loosening the bracket screws with a wrench and slipping the handle off over the screw heads. 3.
LOCA TI ON AND INST ALLA TION (CONT .) CONNECTING THE POWER (HARDWIRING) 1. Turn off the power at the main service 2. Remove the screw from t he back of the unit to connect the power to the heater. 3. Attach the cable connectors to the unit and slide the 10 gauge wire through the cable connector.
LOCA TI ON AND INST ALLA TION (CONT .) CONNECTING THE HEATER TO A 208V-240V / 30AMP PLUG (SOLD SEPARATELY) 1. Remove the screws from the back of the unit to re move the cover . 2. Attach the 208V-240V / 30 AMP Pl ug to the heater using the Live (Also called “Line” or “Hot”), Neutral, and Ground wires from the plug .
OPERA TION NOTE : The first time you operate this heater, it may emit a slight odor and some smoke. This is due to the residual cleaning agents used to clean the element during manufacturing. This is normal op- eration and will cease after the heat er has been used for a few minutes.
MAINTENANCE To prevent possible electric shock, disconnect t he power to the heater at the main service box be- fore attempting ins pect or clean the unit. Use care to prevent damage to the internal com ponents of the heater when cleaning the heating elem ent.
W ARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air Heater to be free of defects i n ma terial and workman- ship for the applications specified in its operation instructi on for a period of ONE (1) year from the date of original re- tail purchase in the United States.
An important point after buying a device Soleus Air HI1-50-03 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soleus Air HI1-50-03 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soleus Air HI1-50-03 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soleus Air HI1-50-03 you will learn all the available features of the product, as well as information on its operation. The information that you get Soleus Air HI1-50-03 will certainly help you make a decision on the purchase.
If you already are a holder of Soleus Air HI1-50-03, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soleus Air HI1-50-03.
However, one of the most important roles played by the user manual is to help in solving problems with Soleus Air HI1-50-03. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soleus Air HI1-50-03 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
