Instruction/ maintenance manual of the product GM-WAC-18ESE-C Soleus Air
Go to page of 24
Models G M -W AC-15ESE-C G M -W AC-18ESE-C Electronic Window A/C Operating Instructions.
.
Thank you for choosing a Soleus Air powered by Gree Air Cond itioner. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new air conditioner.
Recommended Ground Method For you r personal safety, this air conditioner must be grou nded. This air conditioner is equipped with a 3 prong powe r supply cord with a grounded plug. To mini mize the possibility of electrical shock, the cord must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordi nances.
P ARTS LIST TOOLS NEEDED Large Flathead Screwdriver Tape Measurer Adjustable Wrench or Pliers Pencil Level Socket Wrenches Phillips Head Screwdriver Non-Hardware Packing List • Window A ir Condition.
SPEC IFICA T IONS • Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode. • Power consum ption is measur ed when the fan runs at the highe st speed setting. • These specifications are for reference onl y.
INST ALLA TION & ASSEMBL Y INSTRUCTIONS Window Preparation Please read all instructions prio r to installing your air c onditioner. Two people are recommen ded to install this product. If a new electrical outlet is require d, have the outlet insta lled by a qualified electrician before installing the unit.
INST ALLA TION & ASSEMBL Y INST RUCTIONS - WINDOW MOUNTING REMOVE CHASSIS 1. Pull down the front panel and remove the filter (FIG. 1 below) 2. Lift the front panel upwards to remove and place to the side. 3. Locate the four faceplate screws and remove.
INST ALLA TION & ASSEMBL Y INST RUCTIONS - WINDOW MOUNTING REMOVE CHASSIS 1. Pull down the front panel and remove the filter (FIG. 1 below) 2. Lift the front panel upwards to remove and place to the side. 3. Locate the four faceplate screws and remove.
INST ALLA TION & ASSEMBL Y INST RUCTIONS - WINDOW MOUNTING REMOVE CHASSIS 6. Remove the screws from the right side of the cabinet (FIG 7 ). 7. Hold the cabinet while pulling on the base handl e to carefu lly remove the unit. Do not pull or lift near the top of the unit (FIG 8).
ASSEMBL Y & INST ALLA TI ON (CONT .) 10 Placing the Cabinet Inside the Window 1. Open the window and plac e the cabinet in the middle of the window sill. 2. Make sure the bottom rail is se ated over the window sill as shown below. Bring t he window down temporar- ily behind the top angle rail to hold the cabinet in place.
11 Install Support Brackets 1. Hold each support bracket flush against the outsid e of the window sill. Tighten each bracket to the bottom of the cabinet as shown below. Mark the bracket s at top lever of the window sill and then remove. 2. Assemble the sill angle brackets to the support bra ck- ets at the marked position as shown above.
ASSEMBL Y & INST ALLA TI ON (CONT .) 12 Installing the Chassis into the Cabinet 1. Team lift (two people) the air conditione r chassis and carefully slide it into the cabinet. Let the front of the air conditioner hang out approximately 6”. 2. CAUTION: DO NOT PUS H ON THE CONTROLS OR FINNED COILS.
ASSEMBL Y & INST ALLA TI ON - THRU-THE-W ALL (CONT .) 13 Carefully measure and cut an openi ng with the following dimensions depending on your mod el (FIG. 1 & 2). WIDTH “X” = inside model plus twice the thickness of the framing material used.
ASSEMBL Y & INST ALLA TI ON - THRU-THE-W ALL (CONT .) 14 Refer to the SUPPORT BRACKET ASSEMBLY in the WINDOW MOUNTING section to assemble the sup port brackets. A wooden strip nailed to the outside wall sh ould be used in conjunction with the angled si ll support brack- ets.
1 5 USING YOUR AIR CONDITIONER Electronic Control Panel & Remote Control 1. Power Button: Turns the air conditioner on and off 2. Digital Display: Under ON status without timer setting,the operation mode is Auto, Cool, Energy Saver or Dry mode,and the set temperature will be displayed.
16 OPERA TING YOUR AIR CONDI TIONER REMOTE CONTROL Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries. 1. ON/OFF - Press the ON/OFF button to turn the A/C on or off. When the unit is turned off, the Timer and sleep functions will be can- celled.
17 OPERA TING YOUR AIR CONDI TIONER REMOTE CONTROL Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries. 9. LOCK/UNLOCK - Press the “+” and “—” buttons simultaneously to lock and unlock the remote control.
18 USING YOUR AIR CONDITIONER (Cont.) • Freezing Conditions: This is a cooling only air conditioner. It is not designed for freezing outdoor conditions.
19 CARE AND CLEANING Clean your air conditioner to keep it looking new and to minimize dust build up. Air Filter Cleaning The air filter should be checked at least once every month to see if it needs cleaning. Trapped particles and dust can bui ld up in the filter and may decrease airflow as well as cause the cooling coils to accumulate frost.
PROBLEM The Air Conditioner will not start POSSIBLE CAUSES The air conditioner is unplu gged The fuse is blown/circuit breaker is tripped. Power Failure The current interrupter device is tripped.
PROBLEM Water is dripping outside POSSIBLE CAUSES Hot and Humid weather. SOLUTIONS • This is normal TROUBLESHOOTING (CONT .) Water is dripping inside the room The air conditioner is not correctly tilted outside. • For proper water drainage, make sure the air conditioner is slightly tilted downward from the front of the unit to the rear.
W arranty Soleus International Inc. warrants the accomp anying Soleus Air Air Conditioner to be free of defects in mate- rial and workmanship for the applications specified in its operation instruction for th e period of parts specified below.
6612990 8033.
An important point after buying a device Soleus Air GM-WAC-18ESE-C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Soleus Air GM-WAC-18ESE-C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Soleus Air GM-WAC-18ESE-C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Soleus Air GM-WAC-18ESE-C you will learn all the available features of the product, as well as information on its operation. The information that you get Soleus Air GM-WAC-18ESE-C will certainly help you make a decision on the purchase.
If you already are a holder of Soleus Air GM-WAC-18ESE-C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Soleus Air GM-WAC-18ESE-C.
However, one of the most important roles played by the user manual is to help in solving problems with Soleus Air GM-WAC-18ESE-C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Soleus Air GM-WAC-18ESE-C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
