Instruction/ maintenance manual of the product Ultra 18-Inch 13.5-Amp Snow Joe
Go to page of 16
© 2014 by Snow Joe ® , LLC All rights reserved. Original instructions. A Division of Snow Joe ® , LLC Model SJ620/SJ621 Form No. SJ-SJ620/SJ621-880E-MR2 OPERA TOR’S MANUAL SA VE THESE INSTRUCTIONS 1 3.
2 Personal Safety 1. Stay alert – W atch what you are doing and use common sense when operating the snow thrower . Do not use the machine when tired, ill or under the inuence of drugs, alcohol or medication. A moment of inattention may result in serious personal injury .
3 Safety Symbols The following table describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. It is obligatory at all times to wear goggles or a visor to protect the eyes and face.
Know Y our Electric Snow Thr ower Read the owner’ s manual and safety rules car efully before operating your electric snow thrower . Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various contr ols and adjustments.
5 Assembly Getting Started 1. Remove the snow thrower and all other items fr om the box. 2. Determine the left and right hand side of the snow thrower by standing in the normal operating position. 3. Check all items for shipping damage. If damage is found or suspected or if any of the parts are missing, do not assemble.
6 2. Lift the chute deector and lock it securely onto the dischar ge chute (Fig. 6). 3. Raise or lower the chute deector to the desired height of the snow stream and tighten the knob (Fig. 7). NOTE: Do not overtighten the knob. Chute Crank Assembly 1.
Operation NOTE: Before using this machine, make sur e that the power source you will use complies with the specications detailed in this manual. Before inserting the plug into the socket, verify that the snow thrower’ s roll shaft and rubber plates are rmly secured with scr ews, and that the rubber plates are facing the correct dir ection.
8 PoweringOnandO 1. T o power on, depress and hold the safety switch button found alongside the switch housing (Fig. 15). 2. While depressing the safety switch button, pull the ON/OFF switch lever toward you. Once the machine powers on, release the safety switch button and begin operation (Fig.
9 9. Some parts of the snow thrower may fr eeze under extreme temperatur e conditions. Do not attempt to operate the snow thrower with fr ozen parts. If the parts freeze while the snow thr ower is in use, stop the snow thrower , unplug the extension cord and inspect for fr ozen parts.
10 Maintenance m W ARNING m Makesuretoturnotheswitchanddisconnectthe extension cord befor e performing any maintenance task on your snow thrower . Lifetime Lubrication (Motor and Auger) Lubrication is not necessary and may damage the unit.
11 Replacing the Scraper Bar 1. The scraper bar is located at the base of the snow thrower beneath the rotor housing (Fig. 24). 2. Detach the worn scraper bar from the snow thrower by removing the two scr ews that hold it in place (Fig. 25). 3. Install the new scraper bar and fasten it securely to the snow thrower with the two scr ews (Fig.
12 5. Replace the left panel of the snow blower with all screws (Fig. 27). Replacing the Skid Shoes The skid shoes are located at the bottom of the side panel. Unfasten the two screws on the side panel to r emove the wor n skid shoes (Fig. 30). Install the replacement by fastening it to the side panel with the same two screws.
13 NOTES.
14 NOTES.
15 SNOW JOE ® + SUN JOE ® CUSTOMER PROMISE GENERAL CONDITIONS: Snow Joe ® + Sun Joe ® operating under Snow Joe ® , LLC warrants this new product to the original pur chaser for two years against defects in material or workmanship when used for normal residential purposes.
snowjoe.com.
An important point after buying a device Snow Joe Ultra 18-Inch 13.5-Amp (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snow Joe Ultra 18-Inch 13.5-Amp yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snow Joe Ultra 18-Inch 13.5-Amp - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snow Joe Ultra 18-Inch 13.5-Amp you will learn all the available features of the product, as well as information on its operation. The information that you get Snow Joe Ultra 18-Inch 13.5-Amp will certainly help you make a decision on the purchase.
If you already are a holder of Snow Joe Ultra 18-Inch 13.5-Amp, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snow Joe Ultra 18-Inch 13.5-Amp.
However, one of the most important roles played by the user manual is to help in solving problems with Snow Joe Ultra 18-Inch 13.5-Amp. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snow Joe Ultra 18-Inch 13.5-Amp along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
