Instruction/ maintenance manual of the product 3537 Snapper
Go to page of 10
Rev. 09/2002 TP 400-3537-00-AT-SMA A TT ACHMENT I LLUSTRA TED P AR TS L IST © Copyright 2002 Simplicity Manufacturing, Inc.All Rights Reserved. MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.
2 TP 400-3537-00-AT-SMA © Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. Catcher , Clean Sweep T win - Cover & Bag Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
3 TP 400-3537-00-AT-SMA Catcher , Clean Sweep T win - Cover & Bag Gr oup 1 1704615 1 TUBE ASSEMBLY, Support, (Incl. Ref. Nos. 2, 3, 4, 5, 6, 8, 9 & 11) 2 1960381 7 RIVET, Pop 3 1704075 1 SUPPO.
4 TP 400-3537-00-AT-SMA © Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. Catcher , Clean Sweep T win - Hitch Group - 1694000 and Belo w NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 984011 The above parts group applies to the following Mfg.
5 TP 400-3537-00-AT-SMA Catcher , Clean Sweep T win - Hitch Group - 1694000 and Belo w 1 1703745 1 SUPPORT, Upright 2 1920415 2 CAPSCREW, Hex, Head, 3/8-16 x 1-1/4 3 102004 1 PIN, Round Head 4 1703744.
6 TP 400-3537-00-AT-SMA © Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. Catcher , Clean Sweep T win - Hitch Group - 1694000 and Abo ve NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 986205 3 6 2 5 12 4 5 2 8 9 10 11 11 6 7 5 6 5 1 4 2 5 6 The above parts group applies to the following Mfg.
7 TP 400-3537-00-AT-SMA Catcher , Clean Sweep T win - Hitch Group - 1694000 and Abo ve 1 1724649 1 SUPPORT, Upright 2 1921210 6 CAPSCREW, Hex Head, 3/8-16 x 1 3 1703744 1 BRACKET, Lower Hitch 4 172306.
8 TP 400-3537-00-AT-SMA © Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved. Catcher , Clean Sweep T win - Adapter & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
9 TP 400-3537-00-AT-SMA Catcher , Clean Sweep T win - Adapter & Blade Group 1 1703769 1 TUBE, Transfer 2 1704603 1 LATCH, Tube 3 1960185 1 WASHER, 5/16 4 1935048 1 NUT, Flange Lock, 5/16-18 5 1704.
T orque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.
An important point after buying a device Snapper 3537 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 3537 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 3537 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 3537 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 3537 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 3537, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 3537.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 3537. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 3537 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
