Instruction/ maintenance manual of the product 1733419 Snapper
Go to page of 14
A TT A CHMENT OPERA T OR’S MANU AL Clean Sweep T win Catcher Mfg. No. Description 1695163 Clean Sweep Twin Catcher 1733419 Rev. 00 Rev. Date 05/2006 TP 100-4296-00-AT-SMA Clean Sweep T win Catcher.
.
1 Safety Rules & Inf ormation General W ar nings ............................................2 Saf ety Decals ..................................................2 General Operating Instructions Bef ore Operation ....................................
2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed.
Bef ore Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
Initial Installation 4 Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and disconnect the spark plug wire(s). W ARNING Figure 1. Install Spacer (left side shown) A. Speed Nut, 5/16-18 B. Threaded Side C.
5 Baffle Installation Baffle and Blade Installation Note: Units with an anti-blowout baffle do not require the Clean Sweep baffle. 1. Remove mower deck. See OPERATOR’S MANUAL. 2. Install notched side of baffle (A, Figure 3) to discharge side of deck securing with 5/16-18 x 2 carriage bolt (C) and 5/16-18 locknut (D).
6 Puck Installation Figure 6. Install Pin and Bracket A. Lower Chute B. Locknut, 1/4-20 C. Puck, Metal D. Capscrews, Thin Head, 5/16-18 x 3/4 E. Locknuts, 5/16-18 F. Bracket A C F G D D E Component Installation BRACKET AND PIN INSTALLATION ON LOWER CHUTE 1.
7 Channel Installation Figure 8. Install Channel Assembly A. Channel Assembly B. Hitch C. Pin C B INSTALL CHANNEL ASSEMBLY AND “U”-TUBE 1. Slide the channel assembly (A, Figure 8) into hitch (B) as shown. 2. Install the pin (C) into the right side of hitch (B) and turn pin (C) counterclockwise to lock in place.
8 Cover Installation A Figure 11. Install Cover to Channel Assembly A. Cover B. Pin C. Hair Pin D. Channel Assembly C B INSTALL COVER TO CHANNEL ASSEMBLY 1. Set the cover (A, Figure 11) on channel assembly. Slide pin (B) through hinge on cover and channel assembly (D) securing with hair pin (C).
Install Latch & Hinge 9 A F B Figure 14. Install Lower Discharge Chute 3A. Lower Chute B. Wing Nut C. Rubber Strap D. Carriage Bolt E. Discharge Deflector F. Deflector Hinge Rod G. Bracket LOWER DISCHARGE CHUTE INSTALLATION 1. Lift discharge deflector up (D, Figure 14).
Normal Removal & Installation 10 Normal Remo val & Installation Collector Installation Note: See previous pages for more detailed installation and operation instructions if necessary. 1. Lift discharge deflector up (E, Figure 16). 2. Slide the notch of bracket (G) on to deflector hinge rod (F).
Normal Removal 11 A. Channel Assembly G. Tubes B. Cover H. Boot C. Pin I. Puck D. Hitch J. Discharge Tube E. Bag K. Wire Form F. White Bar L. Seal E D B Figure 17. Normal Installation & Removal C L A G Collector Remov al 1. Disconnect the discharge tube (J, Figure 17) from boot (H) by moving wire form (K) up and out from metal puck (I).
Simplicity Mfg. Inc. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.MasseyLawn.com © Copyright 2006 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA. Simplicity Mfg. Inc. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.
An important point after buying a device Snapper 1733419 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1733419 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1733419 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1733419 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1733419 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1733419, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1733419.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1733419. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1733419 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
