Instruction/ maintenance manual of the product 1695164 Snapper
Go to page of 14
A TT A CHMENT OPERA T OR’S MANU AL Clean Sweep T win Catcher Mfg. No. Description 1695164 Clean Sweep Twin Catcher 1733420 Rev. 00 Rev. Date 05/2006 TP 100-4297-00-AT-N Clean Sweep T win Catcher.
.
1 Safety Rules & Inf ormation General W ar nings ............................................2 Saf ety Decals ..................................................2 General Operating Instructions Bef ore Operation ....................................
2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed.
Bef ore Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
Initial Installation 4 Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and disconnect the spark plug wire(s). W ARNING Figure 1. Install Spacer (left side shown) A. Speed Nut, 5/16-18 B. Threaded Side C.
5 Pin Installation Component Installation PIN INSTALLATION ON LOWER CHUTE 1. Insert the head of pin (C, Figure 3) through front hole of lower chute (A). Secure with 1/4-20 x 5/8 carriage bolt (D) and 1/4-20 lock nut (B) as shown. CARRIAGE BOLT AND PUSH NUT INSTALLATION MOWER DECK HOUSING 1.
6 Latch Installation Figure 6. Install Latch & Hinge to Cover Assembly A. Cover Assembly B. Latch C. Locknuts, ESNA, #10-24 D. Screws, #10-24 x 5/8 E. Hinge F. Locknuts, 1/4-20 G. Screw, Slotted, 1/4-20 x 1/2 A D C B F E F G INSTALL LATCH AND HINGE TO COVER ASSEMBLY 1.
7 T ube Installation Figure 9. Install Center Tube and End Caps A. Center Tube B. Channel Assembly C. Lockwashers, 5/16 D. Nuts, 5/16-24 E. Screw, Special, 5/16-24 F. Tube Ends G. End Caps F G F G E D C C A B A D C D C C F D F D Figure 8. Install “U” Tube A.
8 Bag, Chute and T ube Installation Figure 12. Install Collector Bags A. Cover B. Collector Bags C. Tubes A C B Bag, Chute and T ube Installation INSTALL COLLECTOR BAGS 1. Raise the cover (A, Figure 12). 2. Slide collector bags (B) onto tubes (C) with the white bar towards the rear.
T ube and Chute Installation 9 C A B C D A B E D Figure 14. Install Upper Tube to Cover A. Upper Tube B. Cover C. Ridge, Upper Tube D. Ridge Cutout Figure 15.
Normal Removal & Installation 10 Normal Remo val & Installation Collector Installation Note: See previous pages for more detailed installation and operation instructions if necessary. 1. Lift discharge deflector up (E, Figure 16). 2. Place the front hole of the lower chute (A) onto carriage bolt (C) as shown.
Normal Removal 11 A. Channel Assembly H. Lower Chute B. Cover I. Pin C. Pin J. Middle & Upper Tube D. Hitch K. Strap, Middle E. Bag L. Ridge F. White Bar M. Ridge Cutout G. Tubes E L D B Figure 17. Normal Installation & Removal C I H M A G Collector Remov al 1.
Simplicity Mfg. Inc. - Snapper Products 535 Macon Street McDonough, GA 30253 www.Snapper.com © Copyright 2006 Simplicity Manufacturing, Inc. All Rights Reserved.
An important point after buying a device Snapper 1695164 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper 1695164 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper 1695164 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper 1695164 you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper 1695164 will certainly help you make a decision on the purchase.
If you already are a holder of Snapper 1695164, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper 1695164.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper 1695164. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper 1695164 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
