Instruction/ maintenance manual of the product VP6150 SMK-Link
Go to page of 24
Page 1 User s Manual Rechargeable Blue too th Not ebook Mouse.
Page 2 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3 Consult the dealer or an experienced radio/TV technician for help. Notice: Any changes or modications not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits.
Page 4 MV2 Line Drawings for User's Manual System Requirements Hardware: Bluetooth-enabled computer system; 1 available USB 1.1 or 2.0 port Operating System: W indows 2000, XP or V ista; Mac OS 10.
Page 5 Step 1: Place the mouse on a at surface and remove the battery cover from the top of the mouse by pressing the release button located below the scroll wheel. The mouse will automatically eject the battery cover . Step 2: Insert the two supplied AAA rechargeable Ni-MH batteries (included in the package) to the battery slots.
Page 6 Charging the Batteries • It’ s recommended that you fully charge the batteries before initial use; nevertheless it’ s ready for set up (see next step) anytime dur- ing charging. • Plug the USB connector of the charge cable (included in the box) into the computer ’ s available USB port.
Page 7 When fully charged the scroll wheel will cease to glow . • The initial charging process may take up to 8 hours. Subsequent recharge may require less time depending on the level of residual power of the batteries. • The mouse is operational during charg - ing; you can continue use the mouse while charging it via the USB char ge cable.
Page 8 Setting up Bluetooth Connection Before you can use Bluetooth devices for the rst time you must connect your devices through a standard discovery mode and pairing process. During the process, depending on the system and the Bluetooth software used, it may ask you whether you want to use a passkey; please select “no passkey”.
Page 9 Mouse is designed to work with the three major Bluetooth software stack (protocol) standards: WIDCOMM (Broadcom), Microsoft and T oshiba. In addition, this mouse supports Macintosh OS with Bluetooth capability .
Page 1 0 At the Bluetooth Setup W izard, check “ I want to nd a specic Bluetooth device and congure how this computer will use its services. ” Click Next . T urn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse ashes.
Page 11 The computer will search for new Bluetooth devices in the range and list each device on the screen. Select the Interlink Bluetooth Rechargeable Notebook Mouse . Click Next . Follow the onscreen instructions and installation process begins when you click Next.
Page 12 TOSHIBA Bluetooth Sof tware Make sure your computer ’ s Bluetooth radio is turned on. Double click on the Bluetooth Manager icon in the system tray and then click New Connection.
Page 13 appears. Choose the Express Mode and click Next. T urn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse ashes. The computer will search for new Bluetooth devices in the range and 4.
Page 1 4 list each device on the screen. Select the I nterlink Bluetooth Rechargeable Notebook Mouse . Click Next. The system starts installing drivers. After installation is done, the New Hardware W izard window appears. It will offer to search for Windows updates, select No and click Next .
Page 15 MICROSOFT Bluetooth Sof tware Make sure your computer ’ s Bluetooth radio is turned on. Double click on the Bluetooth Manager icon in the system tray . Select Add Bluetooth Device . Select “ My device is set up and ready to be found ” on the Add Bluetooth Device window and click Next .
Page 1 6 T urn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse ashes. The computer will search for new Bluetooth devices in the range and list each device on the screen.
Page 1 7 A window appears asking for a passkey . Select “ Don’ t use a passkey ” and click Next . Click Finish . Y our Bluetooth mouse is set up and ready to go. APPLE Macintosh Bluetooth Sof tware Make sure your computer ’ s Bluetooth radio is turned on.
Page 18 desktop or in the system bar . Or , click the Apple icon and click System Preferences , then click on the Bluetooth icon. Select T urn Bluetooth On to enable Bluetooth for your Macintosh computer if it’ s not already on. Select Set Up Bluetooth Devices .
Page 19 T urn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse ashes. The computer will search for new Bluetooth devices in the range and list each device on the screen.
Page 20 On the Conclusion screen, click Quit to exit setup. Y our Bluetooth Mouse is successfully installed. Operating T ips & T r ouble Shooting Make sure the mouse is turned on by checking the on/off switch located at the bottom of the mouse before using it.
Page 2 1 sleep mode after 8 minutes of inactivity to save battery power . Click on any mouse button to wake it up. When the mouse cursor behaves erratically check the scroll wheel for power-low indicator , i.e. LED light glowing; and follow the instructions in Charging the Batteries section to recharge the batteries.
Page 22 Bluetooth stack update on your system vendor ’ s website. W arranty: SMK-LINK Electronics warrants to the original end-user purchaser of the Product (“you”) that the Product, excluding batteries, will be free from defects in materials or workmanship under normal use and service for one-year from date of purchase.
Page 23 If your Product requires warranty service, you must rst contact SMK-LINK Electronics Product Support to receive an RMA Number . The contact information can be found on SMK- LINK Electronics website: http://www .smklink.com/support/ contactsupport.
Page 2 4 Thank Y ou Thank you for purchasing the Rechargeable Bluetooth Notebook Mouse. W e know you had other choices and we appreciate that you chose Interlink Electronics by SMK-Link for your wireless needs. So that we may better serve you in the future, please register online at www .
An important point after buying a device SMK-Link VP6150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMK-Link VP6150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMK-Link VP6150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMK-Link VP6150 you will learn all the available features of the product, as well as information on its operation. The information that you get SMK-Link VP6150 will certainly help you make a decision on the purchase.
If you already are a holder of SMK-Link VP6150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMK-Link VP6150.
However, one of the most important roles played by the user manual is to help in solving problems with SMK-Link VP6150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMK-Link VP6150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
