Instruction/ maintenance manual of the product SUK91MBL5 Smeg
Go to page of 24
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________________________4 2. INSTALLATION OF THE APPLIANCE_________________________________________6 3. ADAPTATION TO DIFFERENT TYPES OF GAS ________________________________9 4. FINAL OPERATIONS _____________________________________________________12 5.
Introduction 1. INSTR UCTIONS FOR SA FE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF TH E APPLIANCE AND THEREFOR E MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PL ACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANU AL AND ALL TH E IN STRUCTIONS THEREIN BEFORE USING THE COOKER.
Introduction DURING USE THE APPLIAN CE BECOMES VERY HOT . TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. DO NOT USE CONTAINERS OR BROI LERS THAT EXTEND BEYOND THE OUTE R PERIMETER OF THE HOB. THE APPLIANCE IS DESIGNED FOR USE BY ADULTS .
Instructions for the installer 2. INST ALLA TION OF THE A PPLIANCE It is the law that all gas applia nces are installed by competent persons . Corgi gas installers ar e approved to work to safe and satisfactory standards .
Instructions for the installer 2.1 Electrical connection Make sure that the power line voltage matches the specifications indicated on the rating plate located inside the storage compartment.
Instructions for the installer 8 2.3 Connecting to natural and LPG gas FOR THE GAS CONNECTION, SEE THE TYPE OF APPLIANCE SUPPLY TUBE • Free hexagonal connector Make the connection to the appliance using flexible ba yonet style hose in accordance to B.
Instructions for the installer 9 3. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any cleaning or maintenanc e work, disconnect the appliance from the mains.
Instructions for the installer 10 3.2 Burner and nozzle characteristics tab le (Mod. 90 cm.) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instructions for the installer 11 3.4 Burner and nozzle characteristics tab le (Mod. 60 cm.) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instructions for the installer 1 4. FINAL OPERA TIONS After replacing the nozzles, reposition the fl ame-spreader crowns, the burner caps and the grids. Following adjustment to a gas other than the pr eset one, replace the gas adjustment label fixed to the appliance with the one corresponding to the new gas.
Instructions for the installer 1 4.4 W all fixing • Stretch out the chain attached to the cooker horizontally so that the other end touches the wall. • Mark the wall in the position where the hole is to be drilled. • Drill the hole, insert a wall plug and attach the ch ain.
Instructions for the installer 14 5. DESCRIPTION OF CONTR OLS 5.1 Front contr ol panel All the cooker controls and commands are on the front panel. If the cooker is equipped with an electronic progra mmer, before using the oven make sure that the symbol ; appears on the display.
Instructions for the user 1 VARIABLE GRILL KNOB This allows to vary heat intensity w hen cooking with the grill. The knob can be set with continuity between “ 0 ” and the st op release position, which corresponds to maximum heat.
Instructions for the installer 1 6. USE OF THE HOB 6.1 Lighting of the hob b urners Before lighting the hob burners check that the flame caps are in the correct position and that their burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plugs and thermocouples.
Instructions for the user 17 6.3 Diameter of the vessels to be used on each b urner BURNERS Ø min. and max. (in cm) 1 Auxiliary 12-14 2 Semi rapid 16-24 3 Rapid 18-26 4 Triple crown 18-26.
Instructions for the installer 18 7. USE OF THE O VEN For the models with electronic programmer, before using the oven make sure that the display shows the symbol .
Instructions for the user 1 7.2.2 Using the rotisserie in cookers with maxi oven Fit the supporting frame onto the se cond runner up from the bottom so that the seat to take the rod projects outside the o ven.
Instructions for the installer 2 7.3 Using the pIzza function (only on some models) This appliance Is equipped with a function spe cially developed for cookin g pizza. This function is identified by the symbol on the oven functions knob. To cook a pizza, proceed as described b elow.
Instructions for the user 21 8. ELECTRONIC PR OGRAMMER (ONL Y ON EQ UIPPED MODELS) LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 8.1 Cloc k adjustment When using the oven for the first tim e, or after a power failure, the di splay flashes re gularly and indicates .
Instructions for the installer 22 8.4 End of cooking When cooking is over, the oven w ill automatically swit ch off and, at the same time, an intermittent alarm will sound. After swit ching off the alarm, the display will once again show the rig ht time together with the symbol , indicating that the oven has returned to manual operation mode.
Instructions for the user 23 9. A V AILABLE A CCESSORIES The oven has 4 support for positioning pla tes and racks at various heights. Oven grill: for cooking food on plates, small cakes, roasts or food requiring light grilling. Plate grill: for placing above plate for cooking foods that might drip.
Instructions for the installer 24 10. CLEANING AND MAINTENANCE 10.1 Cleaning stainless steel and enamelled versions To maintain stainless steel in good condition cl ean it regularly after each use, once it has cooled down.
Instructions for the user 2 10.3 Cleaning of oven For best oven upkeep clean regularly after having allowed to cool. Take out all removable parts. • Clean the oven grill with hot water and non-abrasive detergent. Rinse an d dry. • Do not allow residues of sugary foods (such as jam) to set inside the o ven.
Instructions for the installer 2 11. EXTRA ORDINAR Y MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
An important point after buying a device Smeg SUK91MBL5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg SUK91MBL5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg SUK91MBL5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg SUK91MBL5 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg SUK91MBL5 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg SUK91MBL5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg SUK91MBL5.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg SUK91MBL5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg SUK91MBL5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
