Instruction/ maintenance manual of the product S20XMF.1 Smeg
Go to page of 22
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 26 2. INSTALLATION _________________________________________ 28 3. DESCRIPTION OF CONTRO LS ____________________________ 30 4. USE OF THE OVEN ______________________________________ 35 5.
Introduction 1. INSTRUCTIONS FOR SAFE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE CAREFUL READING OF THIS MANUAL AN D ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN.
Introduction ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE “ZERO” (OFF) POSITION WHEN YOU FINISH USING THE OVEN. NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY LIGHTED AND CAUSE FIRES. DURING USE THE APPLIANCE BECOMES VERY HOT.
Instructions for the installer 28 2. INST ALLA TION 2.1 Electrical connection Check that mains voltage and power cable ratings ar e as per the indications provided on the l abel attached to the oven door frame.
Instructions for the installer 2.2 Mounting the oven The oven is de signed for mounting into any piece of furniture as long as heat-resistant. Proceed acc ording to the dimensions s hown in Figures 1 , 2 .
Instructions for the user 30 3. DESCRIPTION OF CONTROLS 3.1 Front control panel All the oven controls are grou ped together o n the front panel. FUNCTION SWITCH KNOB Rotate the knob in ei ther directi.
Instructions for the user THERMOSTAT KNOB Cooking temperature is s elected by turning the knob clock wise to the desired setting, between 50 ° and 250 °C. THERMOSTAT INDICATOR LIGHT When this light comes on, the oven is he ating up. When this light goes out , the preset heating temperature has been reached.
Instructions for the user 32 3.2 Electronic programmer LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY MANUAL OPERATION KEY TIME BACK KEY TIME FORWARD KEY 3.2.1 Clock adjustment When using the oven for th e first time, or after a power failure, the display flashes regularl y and indicates .
Instructions for the user By pressing key , the display lights up, sho wing ; keep the key pressed and at the same time, press k eys or to set the cookin g time. Release key to start the programmed cook ing time count. The display will now show the right time together with symbols A and .
Instructions for the user 34 3.2.6 Switching off the alarm The alarm switches off automatical ly after seven minutes. It can be manually turned off by pressing key . 3.2.7 Minute-counter The programmer can also be used as a sim ple minute counter. The use of the minute-co unter will not interrupt oven operation at the end of the set time.
Instructions for the user 4. USE OF THE O VEN Make sure that you have either turned the mi nute minder knob to the symbol or set a cooking time. If the timer knob is on 0, no heating elements will come on.
Instructions for the user 36 5. A V AILABLE A CCESSORIES The oven features 4 support positions for plates and racks of different height. Some models do not feature all accessories . Grill: useful for holding cooking vessels. Plate grill: for placing above plate for cooking foods that might drip.
Instructions for the user 6. COOKING HINTS In fan-assisted mode pr eheating shou ld be carried out at 30/40°C above the cooking temperature. Thi s considerably shortens cooking tim es and reduces power consumpti on, as well as giving better cooking results.
Instructions for the user 38 Multiple cooking is possible as long as the cooking temperature of the different foods is the same. 6.3 Grill cooking FUNCTION SWITCH THERMOSTAT SWITCH 225 . Permits rapid browning of foods. You are advised to plac e the pan in the highest guide.
Instructions for the user 6.5 Defrosting (multi function models) FUNCTION SWITCH THERMOSTAT SWITCH IN POSITION 0 The flow of air produced by th e fan ensures quicker defrosti ng.
Instructions for the user 40 6.6 Spit roasting (models with static oven) FUNCTION SWITCH THERMOSTAT SWITCH IN POSITION 200 Prepare the spit with the fo od, blocking fo rk screws A . Insert frame B into the third guide from the bottom. Remove handle D and position the spit shaft so that pulley E is guided on the link of frame B in the right side.
Instructions for the user 6.7 Recommended cooking table Cooking times, especially m eat, vary according to the thickness and quality of the food and to consumer taste.
Instructions for the user 42 HOT-AIR COOKING LEVEL FROM BELOW TEMPERATURE (°C) TIME IN MINUTES FIRST COURSES OVEN-BAKED PASTA 2 175 30-35 MEAT ROAST VEAL ROAST PORK CHICKEN DUCK RABBIT 2 2 2 2 2 175 .
Instructions for the user 7. CLEANING AND MAINTENANCE Before performing any operat ions requiring access to powered parts, switch off the po wer supply to the machine. 7.1 Cleaning stainless steel To keep stainless steel i n good condition it shoul d be cleaned regularly after use.
Instructions for the user 44 7.2 Cleaning of the oven For best oven upkeep clean regul arly after having allowed to cool. Take out all removable parts. • Clean the oven grill and si de guides with hot water and no n-abrasive detergent. Rinse and dry.
Instructions for the user 8. EXTRA ORDINAR Y MAINTENANCE The oven may require extraordinary m a intenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
Instructions for the user 46 8.2 Removing Hold the doo r on both si des with both hands near hinge s A and raise l evers B . Lift up the door forming an angle of about 45° and remove. To refit, slide the hinges A in the grooves, dr op the door and release le vers B .
An important point after buying a device Smeg S20XMF.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg S20XMF.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg S20XMF.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg S20XMF.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg S20XMF.1 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg S20XMF.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg S20XMF.1.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg S20XMF.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg S20XMF.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
