Instruction/ maintenance manual of the product PV640B Smeg
Go to page of 26
29 Contents THESE INSTR UCTIONS ARE V ALID ONL Y FOR THE DESTIN A TION COUNTRIES WHOSE IDENTIFYING SYMBOLS ARE INCLUDED ON THE COVER OF THIS MANUAL. THIS IS A CLASS 3 B UIL T IN HOB. INSTRUCTIONS FOR THE USER: th ese contain user advice, the description of the controls and the correct procedures for c leaning and maintenance of the ap pliance.
General instructions 30 1. INSTRUCTIONS FOR USE This manual is an integral part of the appliance. It must be kept in its entirety and in an accessible place for the whole working life of the appliance. W e recommend reading this manual and all informati on it contains carefully before using the appli ance.
General instructions 31 Nev er pla ce saucepans with bases which ar e not perf ectly flat and smooth on the hob . Nev er use cookware which extends bey ond the external per imeter of the hob .
General instructions 32 2. SAFETY PRECA UTIONS Consult the installation in structions fo r safety standards on electrical or gas appliances and for ventilation functions.
General instructions 33 This appliance may be used by children from the age of 8 and by people of reduced physical and mental ability or lacking in e xper ience and knowledge, provided they are supervised or instr ucted on the safe use of the appliance and if they understand the associated risks.
Instructions f or disposal 34 3. ENVIR ONMENT AL CARE 3.1 Our en vironmental care Pursuant to Directives 2002/95/EC , 200 2/96/EC and 2003/108/EC re lating to the reduction of the use of hazardous s u.
Instructions f or the user 35 4. DESCRIPTION OF THE CONTROLS 4.1 Cont rol zone All the hob controls are grouped together on th e front panel. CONTROL ZONE 3-b urner hob 4-b urner hob 5-burner hob KNOB DESCRIPTION T o li ght the flame, press the knob and, at the same time, tur n it anti-clockwise to the minimum flame symbol .
Instructions f or the user 36 5. USING THE HOB Make sure that the f astening plates E, the burners, the crowns and the pan stands are assemb led correctly . The notches A of the flame-sprea der crowns m ust be inser ted into the housings B of the burne r .
Instructions f or the user 37 T o p osition each pan stand correctly on it s bur ner , f ollow the instructions below: 3-burner hob 4-burner hob 5-burner hob At the ends of the legs of the pan stands there are silicone rests with a hole that mu st be centred onto th e matching fixing pins on the surf ace.
Instructions f or the user 38 P osition the suppor t pan stand on the side burne rs, centring the fastening pins ( 1 ) and ( 2 ) and then resting it on the hob.
Instructions f or the user 39 5.2 Lighting the burne rs using a saf ety de vice The burner controlle d by each knob is shown ne xt to the knob (the example to the left corresponds to the front left bur ner). The appliance is equip ped with electronic igniti on.
Instructions f or the user 40 5.4 Cookware diameter s (*) Burner min. and max. Ø (in cm) 1 Au xiliar y 7 - 18 2 Semi-rapid 10 - 24 3 - 4 Rapid 18 - 24 5 - 6 Ultra-rapid 24 - 28 • Do not use gr iddles or plate s to c ook or heat food on the ultra-rapid/triple cr own bur n er ; • Do not place aluminium foil under the b ur ners during use.
Instructions f or the user 41 6. CLEANING A ND MAINTENANCE Bef ore perfor ming any operations requirin g access to powered par ts, disconnect the appliance from the pow er supply .
Instructions f or the user 42 6.2 Cleaning the ac id-etched glass ho b 6.2.1 Grease Use washing up liquid and a microfibre cloth. 6.2.2 Rings an d encrustati ons Use stainless stee l cream Crema Inox or mildly abrasive creams; lea ve the product to act f or a f ew minutes , then wipe awa y with a microfibre cloth.
Instructions f or the user 43 6.3.3 Flame-spreader crowns F or easier cleaning, the burner caps and fl ame-spreader crowns can be remov ed; wash them with w arm water and non-abrasive detergent making sure to remov e any encr ustations and wait until they are perfectl y dry .
Instructions f or the installer 44 7. MOUNTING ONT O FURNITURE The follo wing operation requires buil ding and/or car pentr y wor k and must therefore be carried out by a competent tradesman.
Instructions f or the installer 45 7.3 Fixing using brac kets The figure to the side shows the exact holes to be used to correctly attach the hob to the counter top with brack ets.
Instructions f or the installer 46 7.4 Distances t o respect IMPORT ANT: In case of install ation on an empty kitchen u nit with doors, a separation panel must be placed und er the hob , which must be easily e xtractable to allo w sufficient access for an y technical assistance.
Instructions f or the installer 47 8. GAS CONNECTION After carr ying out any operation on the appliance, check that the gas connections are properly tighten ed. The tightening torque must be 15 Nm minimum and 20 Nm maximum. If required by the type of gas, use a pres sure regulator that complies with current regulations.
Instructions f or the installer 48 8.3 Connection with a rigi d copper hose The connection to the gas su pply network must be made in such a way that it does not cause stresses of any type on the appliance. Carefully screw the adapter unit 4 with double cone to the gas connector 1 of the appliance, placing the supplied seal 3 between them.
Instructions f or the installer 49 9. AD APT A TION T O DIFFE RENT TYPES OF GAS Bef ore carr ying out the following operations, disconnect the appliance from the power supply . The appliance is preset for natural gas G20 (2H) at a pressure of 20 mbar .
Instructions f or the installer 50 9.2 Burner and nozzle c haracteristi cs table Burner Rated heating capacity (kW) Natural gas – G20 20 mbar Nozzle diameter 1/100 mm Reduced capacity (W) Au xiliary (1) 1.1 76 400 Semi-rapid (2) 1.7 95 500 Rapid (3) 2.
Instructions f or the installer 51 9.3 Adjustment f or LPG Unscrew scre w C and push air regulator D as far as it will go . Using a 7-mm wrench, remov e nozzle E and replace it with the appropr iate nozzle, f ollowing the instructions in the tables f or the type of gas to be used.
Instructions f or the installer 52 9.5 Primary air adjustment Ref ers to distance “ X ” in mm. BURNER G20 20 mbar G30/G31 28/37 mbar Au xiliary (1) 1 1.5 Semi-rapid (2) 1 1.5 Rapid (3) 1 2 Rapid (4) 1 2 Ultra-rapid (5) 1 2 Ultra-rapid (6) 1.5 2.5 T o identify the burners on your hob , refer to the dr awings in “9.
Instructions f or the installer 53 9.8 Arrangement of the b urners on the cooking hob BURNERS 1 A uxiliar y 2 Semi-rapid 3 Rapid 4 Rapid 5 Ultra-rapid 6 Ultra-rapid 9.9 Lubrication of gas t aps Over time the gas taps ma y become difficu lt to tur n and get block ed.
Instructions f or the installer 54 10.ELECTRICAL CONNECTION Make sure that the v oltage and ca pacity of the power line conf orm to the data shown on the plate located under the casing.
An important point after buying a device Smeg PV640B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg PV640B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg PV640B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg PV640B you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg PV640B will certainly help you make a decision on the purchase.
If you already are a holder of Smeg PV640B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg PV640B.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg PV640B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg PV640B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
