Instruction/ maintenance manual of the product PTV705 Smeg
Go to page of 14
Contents 18 1. Instructions for safe and proper use ____________________ 19 2. Positioning of hob __________________________________ 20 2.1 Attachment to s upport stru cture ________________________________________20 3. Electrical co nnection _______________________________ 22 4.
Instructions for safe and proper use 19 1. Instructions f or safe and pr oper use THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN IT S ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOL E WORKING LIFE OF THE COOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USI NG THE COOKING HOB.
Instructions for the installer 20 2. P ositioning of hob The following op eration requires building and/or carpentry work so must be carri ed out by a competent tradesman. Installation can be carried out on various materials such as ma sonry, metal, solid wood or plastic laminated wood as lon g as they are heat resistant (T 90°C).
Instructions for the installer 21 Before mounting the device to the unit, lay the provided adhe sive sponge onto the glass surf ace to separate it from the unit. After fixing the provided adhesive spon ge (B) to the glass, mount the device to the unit with the mounting brackets (A) provided with the device itself, as shown in the figure.
Instructions for the installer 22 3. Electrical connection Make sure that the voltag e and capacity of the power line co nform to the data shown on the plate located under the casing.
Instructions for the installer 23 4. Gas connection If the appliance is installed on an oven, the gas pi pe must not be passed along the back of the oven, as this may cause overheating.
Instructions for the installer 24 4.1 Connection to LPG Use a pressure regulator and m ake the connection to the tank according to the provisions of standard s regulations in force. Make sure that feed pressure conforms to the levels shown in the table in Section “5.
Instructions for the installer 25 5. Adapting to different types of gas Before performing any cleaning or mainte nance work, detach the hob from the electrical socket. The hob has been inspect ed for G20 (2H) natural gas at a pressure of 20 mbar. For functioning with other t ypes of gas t he nozzles m ust be replaced and the primary air adjusted.
Instructions for the installer 26 5.2 Regulation for LPG Loosen screw C and push air regulato r D to the bottom. With a 7 mm wrench, remove nozzle E and replace it with the proper one (follow the instructions on the referen ce tables for the type of gas to be used).
Instructions for the installer 27 5.4 Regulation of primary air Referred to distance “ X ” in mm. BURNER G20 20 mbar G30/G31 28/37 mbar Auxiliary 4 open Semi rapid 3 2 Medium rapid 2 2.5 Large rapid 2 2.5 A 2 14 UR B 2 14 To identify the burners on your ho b, refer to the drawi ngs in point “5 .
Instructions for the installer 28 5.7 Regulation of minim um for LPG To regulate the minimum for LPG, completely tighten (clockwi se) the screw inside or next to the gas tap pin (depending on the model). The diameters of the by-passes for ea ch burner are given in table “5.
Instructions for the user 29 6. Description of contr ols 6.1 Front contr ol panel All of the commands and controls for the hob are fou nd on the front panel.
Instructions for the user 30 7. Using the hob Check that the flame cap c rowns, the burner caps and grids are correctly assembled. Pins A of the flame cap crowns must be inserted in ho usings B of the burner rings, and pins C on the grids must be blocked in their respective housings on the hob.
Instructions for the user 31 8. Cleaning and maintenance Never use a steam jet to clean the appliance. Before any inter vention, disconnect the power supply of the d evice. 8.1 Cleaning the hob To keep the hob in good condition, you should clean it after every use (after it has cooled).
An important point after buying a device Smeg PTV705 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg PTV705 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg PTV705 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg PTV705 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg PTV705 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg PTV705, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg PTV705.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg PTV705. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg PTV705 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
