Instruction/ maintenance manual of the product KSM24XU Smeg
Go to page of 12
Manuel d’Instructions Instructions Manual Manual de instrucciones KSM24XU – KSM30XU- KSM36XU.
EN 2 2 INDEX WARNINGS AND RE QUIREM ENTS .................................................................................................................................... 3 RECOMMENDATIONS A ND SUGGEST IONS .........................................
EN 3 3 READ AND SAVE THESE INSTRUCTIONS The Installer mu st leave these ins tructions with th e homeowner. The homeowner must keep these instructions for future referenc e and for local electrical inspec- tors’ use.
EN 4 4 W A R N I N G • Venting system MUST lead the air outside the building. • DO NOT expel the air through a ductwork in an attic or o ther enclosed space. • DO NOT use 4" laundry-type wall caps. • Flexible-type ductwork is NOT recommended.
EN 5 5 WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SH OCK, OR INJURY T O PERSONS, OBSERVE THE FOLLOWING: Install ation Work And Electrical Wiring Must Be Done By Qualified Person(s) In Accordance Wi th All App licable Codes And Sta ndards, In- cluding Fire-Rated Construction.
EN 6 6 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accord- ingly, you may find descriptions of indivi dual f eatures that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liabl e for any damages resulting from incor- rect or improper installation.
EN 7 7 DIMENSIONS and MAIN PARTS Dimensions 5" 1/8 2" 7/16 24'' - 30" - 36" 12" 3" 1/2 12" 1/2 21" 1/4 2" 3/8 10" 5/8 19" 5/16 Min.
EN 8 8 INSTALLATION Wall drilling and bracket fixing 11 12a 12"5/8 X ÷1/16" 4"9/16 24" 7.2.1 4"9/16 Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the center of the area in which the h ood will be installed.
EN 9 9 Mounting th e hood bod y • Before attaching the hood body, tighten the two screws Vr lo- cated on the hood body mounting points. • Hook the hood body onto the scr ews 12a . • Fully tighten support screws 12a . • Adjust screws Vr to level the hood bod y.
EN 1 10 ELECTRICAL CONNECTION • Remove the cover from the Field Wiring Compartment with a phillips screwdriver. • Feed the Power Supply Cabl e through the electrical knockout. Connect the Power Supply Cable to the range- h ood cable. At- tach the Power Supply Cable grounding lead to the green screw provided.
EN 1 11 USE L V1 V2 V3 S Control board L Light Switches the lighting system on and off. S Led Motor running led. V1 Motor Switches the ext ractor motor on and off at low speed. Used to p rovide a contin- uos and silent air change in the presence of light cooking vapours.
EN 1 12 CARE Metal grease filters • The filters mu st be cleaned ev er y 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time, supporting them with one hand and turning the safety knobs (pull and turn).
An important point after buying a device Smeg KSM24XU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg KSM24XU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg KSM24XU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg KSM24XU you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg KSM24XU will certainly help you make a decision on the purchase.
If you already are a holder of Smeg KSM24XU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg KSM24XU.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg KSM24XU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg KSM24XU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
