Instruction/ maintenance manual of the product KD90N Smeg
Go to page of 8
WARNING! • Read the instructions carefully before installing and/or using the hood. • Before connecting, make sure that the mains voltage corresponds to the voltage on the rating plate inside the hood. (see fig. 7) • Once you remove the appliance from its packaging make sure it is intact.
WARNING! • Read the instructions carefully before installing and/or using the hood. • Before connecting, make sure that the mains voltage corresponds to the voltage on the rating plate inside the hood. (see fig. 7) • Once you remove the appliance from its packaging make sure it is intact.
Recirculation mode: Leave the motor intake free. Install the active carbon filters as shown in page 6. Warning: if the hood is not supplied with an active carbon filter, it is necessary to buy it separately and assemble it before using the hood. i) Chimney assembly : Adjust the two telescopic chimneys to the required length (fig.
Recirculation mode: Leave the motor intake free. Install the active carbon filters as shown in page 6. Warning: if the hood is not supplied with an active carbon filter, it is necessary to buy it separately and assemble it before using the hood. i) Chimney assembly : Adjust the two telescopic chimneys to the required length (fig.
Ø ELECTRONIC PUSHBUTTONS: Lights ON/OFF 0/1 OFF/1 speed 2-3-4 Speed adjustment Filters reset button OPTIONAL FUNCTIONS: - AUTO POWER-OFF TIMER: Pushing one of the speed adjustment buttons (2-3-4) twice, you will activate the “Auto power-off timer” function that turns the motor and light off after 10 mins.
Ø ELECTRONIC PUSHBUTTONS: Lights ON/OFF 0/1 OFF/1 speed 2-3-4 Speed adjustment Filters reset button OPTIONAL FUNCTIONS: - AUTO POWER-OFF TIMER: Pushing one of the speed adjustment buttons (2-3-4) twice, you will activate the “Auto power-off timer” function that turns the motor and light off after 10 mins.
LIGHTS REPLACEMENT: Before performing any cleaning and/or maintenance operation, disconnect the hood from the mains supply. According to the model, the hood can be equipped with different kind of lighting such as incandescent, halogen and neon lamps. a) Incandescent lamps: E14 – 40W 230V lamps.
WARRANTY AND TECHNICAL ASSISTANCE SERVICE The hood packaging includes, together with this operating and maintenance booklet, the Smeg Warranty Booklet . Please read the Smeg Warranty Booklet for complete information about the warranty (N.B. bulbs and filters are not covered by your warranty).
An important point after buying a device Smeg KD90N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg KD90N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg KD90N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg KD90N you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg KD90N will certainly help you make a decision on the purchase.
If you already are a holder of Smeg KD90N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg KD90N.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg KD90N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg KD90N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
