Instruction/ maintenance manual of the product ET 52250 Smeg
Go to page of 14
DE Gebrauchsanweisung 2-14 . . . . . . . . . . . . . . . . . GB Instruction manual 15-27 . . . . . . . . . . . . . . . . . . FR Mode d'emploi 28-42 . . . . . . . . . . . . . . . . . . . . . IT Istruzioni per l'uso 43-55 . . . . . . . . . . .
Table of contents 15 Protection of the Environment 16 . . . . . . . . . . . . . . . Notes on disposal 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to save energy 16 . . . . . . . . . . . . . . . . . . . . . . . . . . Before connecting your new appliance 17 .
16 Protection of the Environment Your new appliance was protected by suitable packaging while it was on its way to you. All materials used for this purpose are environmentĆfriendly and suitable for recycling. Please make a contribution to protecting the environment by disposing of the packaging appropriately.
17 q Make use of the residual heat. For longer cooking times, it is possible to switch off the hotplate 5 to 10 minutes before the end of the cooking time. q Even though the hotplate has been switched off, you can use it for as long as the residual heat indicator is illuminated to warm dishes or melt ingredients.
18 q Please retain these operating and installation instructions. The envelope for the operating instructions contains details of the afterĆsales service which you may need to call if repairs are required. Please submit the operating and installation instructions to any subsequent user of the appliance.
19 q In the event that a drawer is located beneath the hob, you must not store any combustible items or spray cans in the drawer. Do not place any combustible items on top of the hob. q If any cracks, fissures or other breaks appear on the hob, it must be rendered inoperable immediately.
20 q Do not use the hob as a storage space or work surface. Salt, sugar or sand (can occur when vegetables are cleaned) can cause scratches on the hob. q Ensure that no hard or sharp object is dropped onto the hob, otherwise it could become damaged as a result.
21 Metallic shimmering discoloration due to wear from pan bases or use of an unsuitable cleaning agent. Decor rubbed off due to use of an unsuitable cleaning agent The hob Cooking zone 18 cm Operation display and Residual heat indicator Cooking zone 14,5 cm Hotplate control The hob has a separate residual heat indicator for each of the hotplates.
22 Setting procedure The hotplate controls are used to set the heat setting of the hotplates. You can turn the controls either to the right or to the left.
23 The following tables provide you with a few examples. Please remember that the cooking times depend on the type, weight and quality of the food, which means that deviations are possible. Set the cooking zone control to setting 6 for bringing to the boil or initial frying.
24 Total cooking time Ongoing cooking Boil start setting 6 Amount Frying Fish fingers Pancakes Cutlet (in breadcrumbs) Steaks 2 Ć 3 pcs. 2 Ć 3 min. 2 Ć 3 min. 2 Ć 3 min. 2 Ć 3 min. 3 Ć 4 3 Ć 4 3 Ć 4 4 Ć 5 8 Ć 11 min. ongoing frying 7 Ć 10 min.
25 Water spots can also be removed using lemon juice or vinegar. If you accidentally spill acidic liquids onto the hob frame, please wipe off immediately using a damp cloth. Otherwise dull areas may appear on the hob surface. If the hob is very dirty, it is best to use a common household glass scraper.
26 The hob surround is best cleaned with lukewarm soapy water. Do not use a sharp or abrasive cleaning agent. q The temperature of the hotplate is controlled via the switching on and off of the heater; This means that the hotplate does not always glow red.
27 AfterĆsales service When calling upon our afterĆsales service, please specify the E number and FD number of your apĆ pliance. The nameplate containing these numbers can be found on the back page of these operating instrucĆ tions.
An important point after buying a device Smeg ET 52250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg ET 52250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg ET 52250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg ET 52250 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg ET 52250 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg ET 52250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg ET 52250.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg ET 52250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg ET 52250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
