Instruction/ maintenance manual of the product DI912 Smeg
Go to page of 36
INSTRUCTION MANUAL DISHWASHER.
Contents 37 1. Safety and operating instructions __________________________ 38 2. Installation and hook-up __________________________________ 41 3. Description of the controls ________________________________ 45 4. Operating instructions ___________________________________ 54 5.
Safety instructions 38 1. Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULL Y READ ALL THE INSTRUCTI ONS CONTAINED IN THIS MANUAL.
Safety instructions 39 THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT ( WEEE ). BY ENSURING THIS PRODUCT IS DISPOSED OF CORREC TLY.
Safety instructions 40 DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE END OF THE WASHI NG PROGRAM AND BEFORE THE DRYING CYCLE. KNIVES AND OTHER SHARP-POINTED KITCHEN UTENSILS MUST BE PLACED IN THE CUTLERY BASKET WITH THEIR TIPS FACING DOWNWARD.
Installation instructions 41 2. Inst allation and hook-up Remove the polystyrene basket retainers. Position the appliance in the desired place of installatio n. The back or sides of the dishwasher may be placed up against walls or other furniture units.
Installation instructions 42 2.1 Water supply connection Preventing the risk of clogging or damage: if the w ater pipe is new or has not been used for a long time, before connecti ng to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance.
Installation instructions 43 IF THE APPLIA NCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD: IT IS NECESSARY TO INSTALL IN THE FIXED WIRING AN ALL-POLE DISCONNECTION DEVICE HAVING A GAP BETWEEN CONTACTS OF AT LEAST 3.5MM . AFTER INSTALLATION THE DI SCONNECTION DEVICE HAS TO BE EASY TO REACH.
Installation instructions 44 FOR UK ONLY: THIS APPLIANCE MUST BE E ARTHED. Fuse replacemen t If the mains lead of this applianc e is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S .T .A. approved fuse to BS 1362 type and proceed as follo ws: 1.
User instructions 45 3. Description of the controls 3.1 Upper panel All the dishwasher c ontrols are grouped o n the upper panel. S witch-on, programming, switch-off etc. procedures are only possible when the door is open. 1 ON/OFF BUTTON Pressing this button energises the appliance.
User instructions 46 8 "3/1" OPTION BUTTON Press this button to activate the option for use of 3/1 products. 9 "3/1" OPTION LIGHT Illuminates to indicate that the function is activated. 10 WASH-ZONE BU TTON Press this button to select the zone where you wi sh to concen trate the w ashing action.
User instructions 47 SETTING THE WASHING PROGRAM A ND SWITCHING ON To select the most suitable program for the dishes to be washed refer to the table below, which i ndicates the most appropriate program acc ording to dish type and degree of soiling.
User instructions 48 PROGRAMME DUR ATION CONSUMPTION ( 3 ) NR SYMBOL NAME TYPE OF DISHES AND DI RT PROGRAM DESCRIPTION MINUTES (2) WAT ER ( LITRES) (1) POWER (KWh) (2) DETERGENT GRAMS 6 DISH WAR MER C.
User instructions 49 The washing cycle will not take place if the dishw asher door is left open or not properly closed. TABLE FOR CERTIFICATION BODIES Reference stan dard EN 50242 Reference program BIO Load 12 place-settings Type of detergent B Amount of detergent 30 g Rinse aid setting 5/6 3.
User instructions 50 CHANGING THE PROGRAM To change the progr am in progress, simply open the d oor and select a new program. When the door is closed the dish washer will automatically select the new program.
User instructions 51 "3/1" OPTION BUTTON (available in all programs except the soak program) By pressing the button (8) you activate the " 3/1 " option, confirmed w hen the relative light comes on.
User instructions 52 ADJUSTING THE WATER SOFTENING SYSTEM N.B.: for the setting belo w to be possible, a washing program other than the soak program must be set. Press the PROGRAM DELA Y button (12) and keep it pressed until th e preset value appears follo w ed by a full stop (normally 3.
User instructions 53 If the door has to be opened while washing is in progress, the progr am will be interrupted. The relativ e light will keep flashing and a beeper will signal that the cycle has not been compl eted. When the door is closed the program will c ontinue from where it w as interrupted.
User instructions 54 4. Operating instructions Once the dishwasher has b een correctly installed, prepare for us e as follows: x Adjust the wa ter softening system; x Add the regen erating salt; x Add the rins e aid and detergent.
User instructions 55 x Do not use tabl e salt as it contains insoluble substances which, over time, may damage the water softening system. x When necessary, refill the r egenerating salt container before starting the washing program .
User instructions 56 ADDING THE RINSE AID The rinse aid helps the d ishes dry faster and prevents the formation of scale deposits and staini ng; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door.
User instructions 57 ADDING THE DETERGENT After adding the detergent, to close the li d slide it in the direction shown by the arrow as far as it will go then press gently to lock. During washing, the dispenser will be opened automatically. x Use only detergents specially formulated for dis hwashers.
User instructions 58 x "3/1" Products If you wish to use detergents which already contain salt and rinse aid, check whether your dishwasher is fitted with the " 3/1 option button " on the " Controls description " page and t hen refer to the section which explains how to use this funct ion.
User instructions 59 WARNING! x Make sure that the dishes are securely in pla ce so that they cannot tip over or obstruct the rotation of the spray arms during the washing cycle. x Do not place very small obj ects in the baskets as these could fall and obstruct the spray arms or the wash pump.
User instructions 60 4.4 Using the baskets The dishwasher has a capacit y of 12 place-settings , including serving dishes..
User instructions 61 The basket is fi tted with plate racks w hich can be stowed horizontal if required. The photos show the rack for normal glasses (item A ) and for fl ute glasses (item B ).
User instructions 62 CUTLERY BASKET Cutlery must be placed with the tips facing downward . The cutlery basket featur es an exclusive syste m of independent sliding tip-up supports , offering a series of combinati ons to allow optimum use of the spac e available.
User instructions 63 5. Cleaning and maintenance Before carrying out any work, always disconnect the appliance from the electrical power supply. 5.1 General warnings and recommendations Avoid the use of acidic or abrasive detergents.
User instructions 64 To remove the upper spray arms, unsrew the looking ring. Wash them under running water a nd carefully replace them in their sea ts, checking that their rotary movement is in no way impeded. CLEANING THE FILTER UNIT x It is advisable to periodicall y inspect the centre filter C and, if necessary, to clean it.
User instructions 65 GENERAL WARNINGS AND RECOMME NDATIONS FOR CORRECT MAINTENANCE: x The filters shou ld be cleaned under running wate r using a stiff brush. x It is essenti al to thoroughly clean the filters according to the ab ove instructions: the dishw asher cannot function if the filters are clogged.
User instructions 66 If the dishes are not being cl eaned properly, check that: x the correct amount of detergent has been ad ded; x there is regenerating salt inside the special container; x the dish.
User instructions 67 6. T roubleshooting The dishwasher is capable of signalling a n umber of faults through the simultaneous illumination of several indicator lights, with the following meanings: FAULT DE SCRIPTI ON E1 Acquastop failure The anti-flooding system has been activated (for the relevant models only).
User instructions 68 FAULT DE SCRIPTI ON E7 Turbine flow-regulator malfunction (for the relevant models only) The appliance is not able to "measure" the amount of water loaded accurately . Interrupt the program and switch off the dishwasher.
User instructions 69 TECHNICA L DATA Width 858 mm Depth measured flush with the outer edge of the control panel 550 mm Height 580 mm Capacity 12 Standard place settings Water supply pressure min.
.
OK 2 1 45 7 6 91 0 8 12 11 14 15 13 17 16 19 20 18 A A 3 19 510 0320 02 2,5÷3 mm min. 2,2 - max. 7,2 kg min. 1,5 - max. 5 kg + min. 358 - max. 368 mm min.
An important point after buying a device Smeg DI912 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg DI912 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg DI912 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg DI912 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg DI912 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg DI912, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg DI912.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg DI912. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg DI912 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
