Instruction/ maintenance manual of the product CV10B Smeg
Go to page of 17
Instructions for Use 59 Instructions for Use Upright Freezer Thank you for your trust and for buying this appliance. We hope it will successfully serve the purpose for many years. The upright freezer for domestic use is intended for freezing fresh food and for long-term storing of frozen food (up to one year), depending on the kind of food.
Instructions for Use 60 Before Putting Into Use • Before connecting the appliance to the mains supply, leave it for about 2 hours to stand in place where it will later on be installed. This will reduce the possibility of malfunctions in the cooling system that might have occurred due to transport handling.
Instructions for Use 61 • If the gasket is damaged or if it turns out that the sealing is poor, the energy consumption is substantially higher. To restore efficiency, replace the gasket. • The condenser on the rear wall should be always clean, free of dust or any impurities.
Instructions for Use 62 • When activating the Super function, the red light may turn on. This is normal condition and there is no need for warning. • The rating plate is in the interior wall or on the back of the appliance.
Instructions for Use 63 Placing and Installation Choosing the Right Place Place the appliance in dry and regulary ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance.
Instructions for Use 64 Connection to Power Supply Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket).
Instructions for Use 65 Description of the Appliance Freezing Compartment (1) is used for freezing fresh foods. Storing Compartment (2) is used for storing packages of frozen foods.
Instructions for Use 66 Indicating Pointers (4) On the front side of the basket and on the freezing compartment door there are movable pointers, that will help you keep order in the appliance. Use two pointers of the same colour - one for the kind of food and the other for the months the package was loaded into the appliance.
Instructions for Use 67 Operation Control The freezer is controlled with the thermostat knob. 1. Red control light 2. Yellow control light 3. Thermostat knob Mode of Operation Continuous operation - the yellow light is on. The cooling system operates continuously - the Super function.
Instructions for Use 68 Thermostat settings towards min help you save energy provided that the freezer is loaded with smaller amount of frozen foods. Changes of the ambient temperature affects temperature in the interior of the appliance. Choose correct setting of the thermostat knob.
Instructions for Use 69 Use Switching on the Empty Freezer Switch the appliance on and set the thermostat knob to the position for continuous operation. (Red and yellow control light are on). When the red light goes off, wait for a couple of hours and load the freezer with packages of fresh foods.
Instructions for Use 70 • Some 24 hours after the last load, set the thermostat knob to the position for automatic operation (yellow light is off). • There is no need to set the thermostat knob to the position for continuous operation if you intend to freeze smaller amount of fresh foods (1-2 kg).
Instructions for Use 71 Maintenance and Cleaning Freezer Defrosting When the frost layer in the freezer is 3-5 mm thick, you should clean the freezer. • 24 hours before defrosting set the thermostat knob to the position for continuous operation (the yellow light is on) so that the food packages are well cooled.
Instructions for Use 72 Changing the Direction of Opening the Door If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared in the factory and are now plugged.
Instructions for Use 73 1 Lower hinge with foot 3 Fasttener 2 Foot 4 Handle.
Instructions for Use 74 Trouble Shooting Guide During the service, you can come across some troubles that in most cases result from improper handling of the appliance and can easy be eliminated.
Instructions for Use 75 something is wrong with the appliance and it has no influence on the lifetime of the appliance. Gradually the noise is reduced. • Sometimes unusual and stronger noise is heard, which is rather unusual for the appliance. This noise is often a consequence of inadequate placing.
An important point after buying a device Smeg CV10B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg CV10B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg CV10B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg CV10B you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg CV10B will certainly help you make a decision on the purchase.
If you already are a holder of Smeg CV10B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg CV10B.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg CV10B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg CV10B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
