Instruction/ maintenance manual of the product Q8721-E Axis
Go to page of 7
Assign an IP Address an d Access the Video Stream 1 Assign an IP Address Default IP Address The Axis network video product is designed for us e on an Ethernet network and requires an IP address for access. Most networks today have a DHCP serv er that au tomatically assigns IP addresses to connected devices.
Assign an IP Address an d Access the Video Stream 2 AXIS IP Utility - single camera/small installation AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address.
Assign an IP Address an d Access the Video Stream 3 AXIS Camera Management - mult iple cameras/large installations AXIS Camera Management can au tomatically discover multiple Axis devices, show connection status, manage firmware upgra d es and assign IP addresse s.
Assign an IP Address an d Access the Video Stream 4 Set the Password To gain access to the Axis product, the pas sword for the defaul t administ rator user root must be set. This is done in the Configure Root Password dialog, which appears when the product is accessed for the first time.
Assign an IP Address an d Access the Video Stream 5 Selecting the wrong frequency may cause image flicker if the product is used in fluorescent light environments. When using 50 Hz, the maximum frame rate is limited to 25 fps. Access the Video Stream The Live View page is displayed with links to the setup pages t o customize the Axis product.
Assign an IP Address an d Access the Video Stream 6 Other Operating Systems and Methods The table below shows the other methods available fo r assigning or discovering the IP address.
Assign an IP Address an d Access the Video Stream 7 Assign the IP address with ARP/Ping 1. Acquire a free static IP addres s on the same network segment as your computer. 2. Locate the serial number (S/N) on the product label. 3. Open a command prompt on your comp uter and enter the following commands: 4.
An important point after buying a device Axis Q8721-E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Q8721-E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Q8721-E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Q8721-E you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Q8721-E will certainly help you make a decision on the purchase.
If you already are a holder of Axis Q8721-E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Q8721-E.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Q8721-E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Q8721-E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
