Instruction/ maintenance manual of the product Q6045-S Mk II Axis
Go to page of 70
AXIS Q6045–S Mk II PTZ Dome Network Camera User Manual.
About this Document This manual is intended for administrators and users of the AXIS Q6045 - S Mk II PTZ Dome Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product.
Safety This product complies with IEC/EN/UL 60950-1 and IEC/EN/UL 60950-22, Safety of Information Technology Equipment. The product shall be grounded either through a shielded network cable (STP) or other appropriate method.
AXIS Q6045–S Mk II PTZ Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS Q6045–S Mk II PTZ Dome Network Camera T able of Contents Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 Symptoms, P ossible Causes and Remedial Actions . . . . . . . . . . . . . . .
AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview Hardware Overview 2 1 3 4 5 6 7 8 9 10 1 1 1 Mounting hole for sunshield (3x) 2 Pressure relief valve 3 Multiconnector 4 Hook for safety .
AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview 5. Keep the gas owing through the camera housing for one minute before removing the chuck from the inlet valve. 6. Lift the pressure relief valve to let the overpressure out of the camera unit.
AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview LED Indicators LED Color Indication Unlit Connection and normal operation Amber Steady during startup. Flashes during rmware upgrade. Amber/red Flashes amber/red if network connection is unavailable or lost.
AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview NO NO NO TICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specic use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions.
AXIS Q6045–S Mk II PTZ Dome Network Camera Hardware Overview 1 Dip switch position Description Default (middle) B Remove VLAN tags from forwarded multicast packages. Use this setting when connecting to the network, directly or through a router or network switch.
AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product.
AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 58 .
AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product 3. From the Trigger drop-down list, select Input Signal . 4. From the second drop-down list, select Manual T rigger . 5. Select the desired action and congure the other settings as required.
AXIS Q6045–S Mk II PTZ Dome Network Camera Access the Product P an and Tilt bars – Use the arrows to pan and tilt the camera view , or click on a position on the bar to steer the camera view to that position. Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.
AXIS Q6045–S Mk II PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS Q6045–S Mk II PTZ Dome Network Camera Media Streams The AMC Control Panel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured.
AXIS Q6045–S Mk II PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.
AXIS Q6045–S Mk II PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS Q6045–S Mk II PTZ Dome Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 19 . • Stream proles. See page 20 . • Camera settings. See page 2 1 . • Overlay image.
AXIS Q6045–S Mk II PTZ Dome Network Camera Video H.264 H.264, also known as MPEG-4 Part 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames.
AXIS Q6045–S Mk II PTZ Dome Network Camera Video Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance Increasing the Color level increases the color saturation. The value 1 00 gives maximum color saturation.
AXIS Q6045–S Mk II PTZ Dome Network Camera Video infrared light. The image is shown in black and white when the IR cut lter is off. Set the IR cut lter to Auto to automatically switch between On and Off according to the lighting conditions.
AXIS Q6045–S Mk II PTZ Dome Network Camera Video Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provide extra information or to mask a part of the image.
AXIS Q6045–S Mk II PTZ Dome Network Camera Video 2. Under Overlay Settings , select Include text . 3. Enter the modier #D and, optionally , additional text which will be displayed also when the action rule is not active. Create the action rule: 1.
AXIS Q6045–S Mk II PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page.
AXIS Q6045–S Mk II PTZ Dome Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page.
AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position.
AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) The product can be mounted in three different horizontal directions. This may cause the view from P an 0° to be changed from the original view . Click Set new P an 0° to set the pan coordinate system to zero in the current direction.
AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) 3. Click Save . 90° - 90° - 180°/180° 0° 90° - 90° - 180°/180° 0° A B B A 1 2 Top view A P an limit start B Pan limit end Gu.
AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) To add a recorded tour: 1. Go to PTZ > Guard Tour and click Add . 2. Select Create a record tour and click OK . 3. Enter a descriptive name. 4. Specify the pause length between runs.
AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.
AXIS Q6045–S Mk II PTZ Dome Network Camera PTZ (Pan T ilt Zoom) Control Queue The administrator can set up a queue for PTZ controllers from PTZ > Control Queue . Once set up, the PTZ Control Queue buttons appear in the Live View page offering one viewer exclusive control for a limited period of time.
AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors Detectors Shock Detection Enable Shock Detection from the Detectors menu. Shock detection is used, for example, to generate an alarm if the product is hit by an object. Use the Shock sensitivity slider to adjust the sensitivity level at which the product should send an alarm upon being hit.
AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors P arameter Object Size History Sensitivity Description Object size relative to window size. Object memory length. Difference in luminance between background and object. High level (1 00%) Only very large objects trigger motion detection.
AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors 1. Choose Area of interest from the drop-down list. Set the virtual area to detect if an object has disappeared from this area of interest. Important When conguring Object size the view shall be zoomed out to Wide position.
AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors 3. Use the Sensitivity slidebar to dene how sensitive the detection should be. The lower sensitivity selected on the Sensitivity bar , the greater difference in luminance is needed between the object and the background for the detector to be activated.
AXIS Q6045–S Mk II PTZ Dome Network Camera Detectors 2. Choose Object size from the drop-down list. Set the size limits of the object that should be detected. The camera will detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.
AXIS Q6045–S Mk II PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting.
AXIS Q6045–S Mk II PTZ Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed.
AXIS Q6045–S Mk II PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected.
AXIS Q6045–S Mk II PTZ Dome Network Camera Events - Live Stream Accessed – T rigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notications. - Motion Detection – Trigger the rule when motion is detected.
AXIS Q6045–S Mk II PTZ Dome Network Camera Events - Recurrence – T rigger the rule periodically . See Set Up Recurrences on page 44 . This can for example be used to upload an image every 5 minutes. - Use Schedule – T rigger the rule according to the selected schedule.
AXIS Q6045–S Mk II PTZ Dome Network Camera Events FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using HyperText Transfer Protocol Secure (HTTPS).
AXIS Q6045–S Mk II PTZ Dome Network Camera Events 2. Enter a descriptive name and the information needed for a daily , weekly , monthly or yearly schedule. 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.
AXIS Q6045–S Mk II PTZ Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 45 . • To set up action rules, see page 40 .
AXIS Q6045–S Mk II PTZ Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > T CP/IP > Basic .
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar .
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced .
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NA T routers on your network.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 1 0.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options • the default router • the subnet mask • the system time • the IEEE 80 2.1X settings • uploaded applications are kept but must be restarted Click Default to reset all settings, including the IP address, to the factory default values.
AXIS Q6045–S Mk II PTZ Dome Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NO TICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product.
AXIS Q6045–S Mk II PTZ Dome Network Camera Multi-Connector Cable Multi-Connector Cable Note The supplied multi-connector cable is required in order to maintain the camera’s NEMA/IP rating. The multi-connector cable is connected to the camera’s multi-connector , see Hardware Overview on page 6 .
AXIS Q6045–S Mk II PTZ Dome Network Camera Multi-Connector Cable RX+ 3 – green/white Ethernet – receiving RX- 4 – green Ethernet – receiving TX+ 5 – orange/white Ethernet – transmitting TX- 6 – orange Ethernet – transmitting 0 V DC (-) 8 – black 0 V DC DC output (12 V) 1, 9 – red Used to power camera 12–13.
AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version.
AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .
AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls.
AXIS Q6045–S Mk II PTZ Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur .
AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS Q6045-S Mk II 50 Hz AXIS Q6045-S Mk II 60 Hz Image sensor 1/3” Progressive Scan CMOS Lens f 4.44 – 142.
AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform; specications at www .
AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications Function/group Item Specications IEC/EN 60529 IP66, IP67, IP6K9K, NEMA 250 Type 4X IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-60, MIL-STD 8 10G 509.
AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications Network connector Two 2-pin Ethernet terminal blocks. I/O terminal connector 2-pin terminal block. External Connectors Ground Screw Ground screw for connecting the media converter switch to earth ground.
AXIS Q6045–S Mk II PTZ Dome Network Camera T echnical Specifications P erformance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both.
User Manual V er . M2.9 AXIS Q6045–S Mk II PTZ Dome Network Camera Date: January 20 15 © Axis Communications AB, 2015 P art No. 590 1 0.
An important point after buying a device Axis Q6045-S Mk II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis Q6045-S Mk II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis Q6045-S Mk II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis Q6045-S Mk II you will learn all the available features of the product, as well as information on its operation. The information that you get Axis Q6045-S Mk II will certainly help you make a decision on the purchase.
If you already are a holder of Axis Q6045-S Mk II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis Q6045-S Mk II.
However, one of the most important roles played by the user manual is to help in solving problems with Axis Q6045-S Mk II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis Q6045-S Mk II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
