Instruction/ maintenance manual of the product A1C-6 Smeg
Go to page of 27
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 30 2. INSTALLATION OF THE APPLIANCE ________________________ 32 3. DESCRIPTION OF CONTRO LS ____________________________ 34 4. USE OF THE COOKING HOB ______________________________ 41 5.
Introduction 1. INSTRUCTIONS FOR SAFE AN D PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUAL AND ALL THE INSTR UCTIONS THEREIN BEFORE USING THE COOKER.
Introduction THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS POSITIONED VISIBLY IN THE STORAGE COMPARTMENT. THE PLATE MUST NOT BE REMOVED. DO NOT INSTALL THIS APPLIANCE ON A RAISED PLATFORM DURING USE THE APPLIANCE BECOMES VERY HOT.
Instructions for the installer 32 2. INST ALLA TION OF T HE APPLIANCE This unit is equipped with a type Y fire protection, and may be set against walls that are higher than the hob.
Instructions for the installer For operation on 380-415V3N ∼ : use an H05RR-F-type five-core cable (5 x 2.5 mm 2 ). For operation on 380-415V2N ∼ : use an H05RR-F-type four-core cable (4 x 4 mm 2 ). For operation on 220-240V ∼ : use an H05RR-F-type three-core cable (3 x 6 mm 2 ).
Instructions for the user 34 3. DESCRIPT ION OF CONTR OLS 3.1 Front control panel All the cooker controls and commands are o n the front panel. The user has only to press the central key for 1 - 2 seco nds to enable use of the oven on first use or after a power blackout.
Instructions for the user FUNCTION SWITCH KNOB Turn the knob to select from the following functions: NO FUNCTION SET LOWER HEATING ELEMENT + VENTILATION UPPER AND LOWER HEATING ELEMENT LOWER HEATING E.
Instructions for the user 36 3.2 Electronic Analogue Clock (on some models only) LIST OF FUNCTIONS MINUTE-MINDER BUTTON AUTOMATIC SWITCH-OF F TIMING BUTTON TIME SETTING AND RESET VALUE DECREASE BUTTON VALUE INCREASE BUTTON 3.
Instructions for the user 3.2.2 Minute-minder This function does not stop cooking but just triggers the beeps. - When the key is pressed the display illuminates, appearing as s hown in figure 1; - Press the or keys within 6/7 seconds to set the minute-minder.
Instructions for the user 38 3.2.3 Programming Cooking duration time: the 2 nd button can be used to set the cook ing time. Before setting it, turn the thermostat to the cook ing temperature of choice and the function selector knob to any setting.
Instructions for the user Cooking start: as well as setting a cook ing duration time, the user can also set the cooking start time (up to 12 hours after the current time). To set the cooking start/end time, proceed as follows. - Set the cooking duration time as described in the previous point.
Instructions for the user 40.
Instructions for the user 4. USE OF THE COOKING HOB 4.1 Cooking zones The appliance features 5 c ooking zones of different diameter and power. Their positi on is clearly indicated by circles and the heat given off is defined by the markings on the glass surface.
Instructions for the user 42 Take care not to spill sugar or sweet mixtures on to the cooking hob when hot. Never place materials or substances which may melt ( plastic or aluminium foil) on to the cooking hob.
Instructions for the user 5. USE OF THE O VEN 5.1 Warnings and general advice Before using the oven for the first time, pre-heat it to maximum temperature (250°C) lo ng enough to burn any manufacturing oi ly residues which could give the food a b ad taste.
Instructions for the user 44 6. A V AILABLE A CCESSORIES The oven features 4 support positions for plates and racks of different height. Oven rack: for cooking food on plates, small cakes, roasts or food requirin g light grilling. Plate rack: for placin g above plate for cooking foods that might drip.
Instructions for the user 7. COOKING HINTS In fan-assisted mode preheating should be carried o ut at 30/40°C above the cooking temperature. This considerably shortens cooking times and reduces power consumption, as well as giving better cooking results.
Instructions for the user 46 7.2 Hot-air cooking FUNCTION SWITCH THERMOSTAT SELECTOR SWITCH FROM 50° TO 250°C This system is suitable for cooking on several levels, including different types of food (fish, meat etc.), with out the tastes and smells mingling.
Instructions for the user 7.4 H ot-air grilling FUNCTION SWITCH THERMOSTAT SWITCH FROM 50° TO 250°C Ensures uniform heat distribution with greater heat penetr ation into the food. Food will be lightly brow ned on the outside and remain soft inside. Keep the oven door closed during cooking.
Instructions for the user 48 7.6 Spit cooking FUNCTION SWITCH THERMOSTAT SWITCH AT MAXIMUM Prepare the sp it with the food , blocking fork screws A . Insert frame B into the third guide from the bottom. Remove handle D and position the spit shaft so that pulley E is gu ided on the link of frame B in the right side.
Instructions for the user 7.7 Recommended cooking table Cooking times, especially m eat, vary according to the thickness and quality of the food and to consumer taste.
Instructions for the user 50 HOT-AIR COOKING LEVEL FROM BELOW TEMPERATURE (°C) TIME IN MINUTES FIRST COURSES LASAGNE OVEN-BAKED PASTA CREOLE RICE 2 2 2 190 - 210 190 - 210 190 - 220 20 - 25 25 - 30 2.
Instructions for the user 8. CLEANING AND MAINTENANCE 8.1 Cleaning the glazed ceramic hob Before any intervention, disconnect the power supply of the device. The cooking hob should be regularly cleaned; best after every use, once the residual heat signal lamps have gone off.
Instructions for the user 52 8.3 Cleaning of the oven (without self-cleaning panels) For best oven upkeep clean regul arly after having allowed to cool. Take out all removable parts. Detach the side guides by un screwing ring nut A and sliding out of the rear hole B.
Instructions for the user 8.3.4 Assembling the self-cleaning liners 1. Remove all accessories from the oven; 2. Remove the side racks (fig.1); 3. Extract the side liners “ F ” and “ G ”(fig. 2); 4. Remove the back pane l “ A ” after undoing the threaded ring-n ut “ C ” (fig.
Instructions for the user 54 9. EXTRA ORDINAR Y MAINTENANCE The oven may require extraordin ary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
Instructions for the user 9.2 Removing the door Open the door completely and fit the pins ( supplied) into the holes from the inside. Close the door t o an angle of about 45°, lift it and remove it from its seat. To replace, fit the hinges into the grooves provided, then lower the door until it comes to rest and extract the pins.
An important point after buying a device Smeg A1C-6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg A1C-6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg A1C-6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg A1C-6 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg A1C-6 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg A1C-6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg A1C-6.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg A1C-6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg A1C-6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
