Instruction/ maintenance manual of the product Robo-Kleen SmartPool
Go to page of 8
T able of Contents Important Safeguards 2 Introduction 3 Installation 4 Operation 5 Cleaning Pattern 5 Automatic Shutoff and Removal 6 Maintenance 6 W arranty 8.
! W ARNING: T o reduce the risk of fire, electrical shock, injury , or damage to your product or to bathers: ! Do not use if unit is damaged in any way . ! Use this product only for its intended use as described in this manual. ! Unit must be submerged in water to operate properly .
Congr atulations on y our purchase! Y ou will find Robo- Kleen to be the most eff ective pool cleaner a vailab le. Unlik e water-po wered cleaners, which put all dir t and debr is through y our e xisting pool pump and filter , Robo-Kleen has its own pump and filter system.
Underside of Mobile Cleaning Unit Suction Ports Cleaning Brushes Locking T abs Locking T abs The power supply should be positioned so that Robo-Kleen can reach all the walls of the swimming pool and must be at a minimum distance of 10 feet from the edge of the pool.
DO NOT ENTER THE SWIMMING POOL WHILE ROBO-KLEEN IS IN OPERA TION TO A VOID ENT ANGLEMENT WITH CORD Operation a. Connect the cable to the power supply b .
Automatic Shutdown and Removal Robo-Kleen will automatically shut down after a work cycle of approximately 3 hour s. S witch off the power supply for at least 30 seconds before restarting. AL WA YS SWITCH OFF THE POWER SUPPL Y BEFORE REMOVING ROBO-KLEEN FROM THE POOL.
b. Pull one of the 4 red tabs out and remove the filter bag from the bottom lid. T urn the filter bag inside out. Use a garden hose to wash it thoroughly . The bag should be laundered periodically , using a regular wash cycle. c. Rinse the bottom lid parts and bottom brushes.
TWEL VE MONTH LIMITED W ARRANTY Electr onics Products T welve month limited warranty in Continental USA only from date of original purchase for manufacturing defects under normal and reasonable use, and subject to the maintenance requirements and installation guidelines set forth in the product instruction manual.
An important point after buying a device SmartPool Robo-Kleen (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SmartPool Robo-Kleen yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SmartPool Robo-Kleen - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SmartPool Robo-Kleen you will learn all the available features of the product, as well as information on its operation. The information that you get SmartPool Robo-Kleen will certainly help you make a decision on the purchase.
If you already are a holder of SmartPool Robo-Kleen, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SmartPool Robo-Kleen.
However, one of the most important roles played by the user manual is to help in solving problems with SmartPool Robo-Kleen. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SmartPool Robo-Kleen along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
