Instruction/ maintenance manual of the product E1887 Slim Devices
Go to page of 76
E1887 / Nov 2004 Notebook PC Hardware User ’ s Manual.
Safety Statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undes- ired operation.
3 Safety Statements Nordic Cautions (for Notebook PC with Lithium-Ion Battery) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer . Dispose of used batteries according to the manufacturer ’ s instructions.
4 Safety Statements Safety Statements The following safety precautions will increase the life of the Notebook PC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Do not use damaged power cords, accessories, or other peripherals.
5 T ransportation Precautions T o prepare the Notebook PC for transport, you should turn it OFF and disconnect all external periph- erals to prevent damage to the connectors . The hard disk drive’ s head retracts when the power is turned OFF to prevent scratching of the hard disk surface during transport.
6 Danish Dutch English Finnish French German Greek Italian Portuguese Spanish Swedish CTR 21 Approval (for Notebook PC with built-in Modem) Safety Statements.
7 Safety Statements UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating .
8 Contents 1. Introducing the Notebook PC ................................................................ 1 1 Preparing your Notebook PC ................................................................................... 13 2. Knowing the Parts .....
9 4. Using the Notebook PC ......................................................................... 41 Pointing Device ........................................................................................................ 42 Using the T ouchpad ...
10 Appendix ..................................................................................................... 59 Optional Accessories ................................................................................................ 60 USB Hub (Optional) .
11 1. Introducing the Notebook PC About This User’s Manual Notes For This Manual Preparing your Notebook PC.
12 1 Introducing the Notebook PC About This User ’ s Manual Y ou are reading the Notebook PC User ’ s Manual. This User’ s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User ’ s Manuals: 1.
13 Introducing the Notebook PC 1 Preparing your Notebook PC These are only quick instructions for using your Notebook PC. Read the later pages for detailed infor - mation on using your Notebook PC. 1. Install the battery pack 3. Open the Display Panel 4.
14 1 Introducing the Notebook PC.
15 2. Knowing the Parts Top Side Bottom Side Right Side Left Side Rear Side Front Side.
16 2 Knowing the Parts T op Side Refer to the diagram below to identify the components on this side of the Notebook PC. Details are given starting from the top and going clockwise.
17 Knowing the Parts 2 Status Indicators Status indicator details are described in section 3. Touchpad and Buttons The touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse.
18 2 Knowing the Parts Bottom Side Refer to the diagram below to identify the components on this side of the Notebook PC. Details are given starting from the top and going clockwise. IMPORT ANT! The bottom of the Notebook PC can get very hot. Be careful when han- dling the Notebook PC while it is in operation or recently been in operation.
19 Knowing the Parts 2 Battery Lock The battery is held by a spring lock. The spring loaded latch automatically locks the battery pack when inserted. Holding this in the unlock position will allow battery removal. Usage details are described in the battery section later in this manual.
20 2 Knowing the Parts Right Side Refer to the diagram below to identify the components on this side of the Notebook PC. Microphone Input Jack (Mic In) The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices.
21 Knowing the Parts 2 Power (DC) Input The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Notebook PC and char ges the internal battery pack. T o prevent damage to the Notebook PC and battery pack, always use the supplied power adapter .
22 2 Knowing the Parts Left Side Refer to the diagram below to identify the components on this side of the Notebook PC. Kensington ® Lock Port The Kensington ® lock port allows the Notebook PC to be secured using Kensington ® compatible Note- book PC security products.
23 Knowing the Parts 2 Front Side Refer to the diagram below to identify the components on the front side of the Notebook PC. Rear Side Refer to the diagram below to identify the components on this side of the Notebook PC.
24 2 Knowing the Parts.
25 3. Getting Started Using the Battery Pack Operating Systems Power Connection Powering ON The Notebook PC Power Management Restarting or Rebooting Powering OFF The Notebook PC Using the Keyboard But.
26 3 Getting Started Using the Battery Pack Installing and Removing the Battery Pack Y our Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.
27 Getting Started 3 Charging the Battery Pack Before you use your Notebook PC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Notebook PC is connected to external power . Fully charge the battery pack before using it for the first time.
28 3 Getting Started NOTE: This Notebook PC may come with either a two or three-prong plug depending on territory . If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.
29 Getting Started 3 The Power-On Self T est (POST) When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnostic tests called the Power-On Self T est (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’ s architecture.
30 3 Getting Started Power Management Power management settings can be found in the W indows control panel. The following shows the power options properties in W indows. Y ou can define “Stand By” or “Shut down” for closing the display panel, pressing the power button, or activating sleep mode.
31 Getting Started 3 Restarting or Rebooting After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. T o restart the system manually: Click the Start button and select Shut Down | and choose Restart .
32 3 Getting Started Powering OFF the Notebook PC In W indows XP , the Notebook PC can be powered OFF by using Start | Shut Down... | T urn off (or Shut down) .
33 Getting Started 3 “Z” Icon (F1): Places the Notebook PC in Save-to-RAM suspend mode. T ower Icon (F2): W ireless Models Only: T oggles a wireless software application. Use the application to enable/disable the internal wireless LAN and/or Bluetooth.
34 3 Getting Started Keyboard as a Numeric Keypad The numeric keypad is embedded in the keyboard and consists of 15 keys that make number intensive input more convenient. These dual-purpose keys are labeled in orange on the key caps. Numeric as- signments are located at the upper right hand corner of each key as shown in the figure.
35 Getting Started 3 Keyboard as Cursors The keyboard can be used as cursors while Number Lock is ON or OFF in order to increase navigation ease while entering numeric data in spreadsheets or similar applications. W ith Number Lock OFF , press and one of the cursor keys shown below .
36 3 Getting Started Instant Launch Keys (right edge) Instant Launch Keys and Status Indicators Internet Launch Key Pressing this button will launch your Internet browser application while W indows is running. Bluetooth Key (Optional) This button is only applicable on models with internal Bluetooth (BT).
37 Getting Started 3 CD Player Control Buttons and Indicator There are several CD control buttons integrated externally on the Notebook PC for convenient CD playing. The buttons activate and control your operating system’ s audio player when the Notebook PC is ON.
38 3 Getting Started Status Indicators (above keyboard) Optical Drive Activity Indicator Indicates that the Notebook PC is accessing the optical disk drive. The light flashes proportional to the access time. Number Lock Indicates that number lock [Num Lk] is activated when lighted.
39 Getting Started 3 Status Indicators (front edge and top cover) Power Indicator The power indicator will light to show that the Notebook PC is turned ON and blink when the Note- book PC is in the Suspend-to-RAM (Standby) mode. This LED is OFF when the Notebook PC is OFF or in the Suspend-to-Disk (Hibernation) mode.
40 3 Getting Started.
41 4. Using the Notebook PC Pointing Device Storage Devices PC Card (PCMCIA) Socket Optical Drive Flash Memory Card Reader Modem and Network Connections IR Wireless Communication Power System AC Power.
42 4 Using the Notebook PC Pointing Device The Notebook PC’ s integrated touchpad pointing de- vice is fully compatible with all two/three-button and scrolling knob PS/2 mice. The touchpad is pressure sensitive and contains no moving parts; therefore, mechanical failures can be avoided.
43 Using the Notebook PC 4 Double-clicking/Double-tapping - This is a common skill for launching a program directly from the corresponding icon you select. Move the cursor over the icon you wish to execute, press the left button or tap the pad twice in rapid succession, and the system launches the corresponding program.
44 4 Using the Notebook PC Caring for the T ouchpad The touchpad is pressure sensitive. If not properly cared for , it can be easily damaged. T ake note of the following precautions. • Make sure the touchpad does not come into contact with dirt, liquids or grease.
45 Using the Notebook PC 4 Storage Devices Storage devices allow the Notebook PC to read or write documents, pictures, and other files to various data storage devices.
46 4 Using the Notebook PC Inserting a PC Card (PCMCIA) 1. Press in the toggle eject button and release. The recessed spring loaded toggle button will extend when pushed in and released. 2. Press the extended button again to eject the PC Card. Carefully pull the ejected PC card out of the socket.
47 Using the Notebook PC 4 Optical Drive Inserting an optical disc 1. While the Notebook PC’ s power is ON, press the drive’ s eject button and the tray will eject out partially . 2. Gently pull on the drive’ s front panel and slide the tray completely out.
48 4 Using the Notebook PC A CD drive letter should be present regardless of the presence of a CD disc in the drive. After the CD is properly inserted, data can be accessed just like with hard disk drives; except that nothing can be written to or changed on the CD.
49 Using the Notebook PC 4 Flash Memory Card Reader Normally a PCMCIA memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs.
50 4 Using the Notebook PC Hard Disk Drive Hard disk drives have higher capacities and operate at much faster speeds than floppy disk drives and CD- ROM drives. Enhanced IDE drives provide a reliable, fast, and cost-effective mass storage solution in the PC storage industry .
51 Using the Notebook PC 4 NOTE: The built-in modem and network cannot be installed later as an upgrade. Mo- dem and/or network can be installed as a PC card (PCMCIA). Modem and Network Connections The built-in modem and network model comes with both an RJ-1 1 and an RJ-45 port.
52 4 Using the Notebook PC This is an example of the Notebook PC connected to a telephone jack for use with the built-in modem. T elephone W all Jack T elephone cables with RJ-1 1 connectors T elephone connection is optional CAUTION: For electrical safety concerns, only use telephone cables rated 26A WG or higher .
53 Using the Notebook PC 4 Internal 10/100 Network (Gigabit on selected models) Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Note- book PC and the other end to a hub or switch.
54 4 Using the Notebook PC Power System AC Power System The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall outlet to the DC power required by the Notebook PC.
55 Using the Notebook PC 4 W ARNING! Suspend-to-RAM (STR) does not last long when the battery power is de- pleted. Suspend-to-Disk (STD) is not the same as power OFF . STD requires a small amount of power and will fail if no power is available due to complete battery deple- tion or no power supply (e.
56 4 Using the Notebook PC Power Management Modes The Notebook PC has a number of automatic or adjustable power saving features that you can use to maximize battery life and lower T otal Cost of Ownership (TCO). Y ou can control some of these fea- tures through the Power menu in the BIOS Setup.
57 Using the Notebook PC 4 Power State Summary STATE ENTRY EVENT EXIT EVENT “Stand by” • “Stand by” through W indows Start button, • Any device • T imer as set though “Power Management.
58 4 Using the Notebook PC.
59 Appendix Optional Accessories Optional Connections Internal Modem Compliancy Glossary Notebook PC Information.
60 A Appendix Optional Accessories These items, if desired, come as optional items to complement your Notebook PC. USB Hub (Optional) Attaching an optional USB hub will increase your USB ports and allow you to quickly connect or disconnect many USB peripherals through a single cable.
61 Appendix A Optional Accessories (Cont.) These items, if desired, come as optional items to complement your Notebook PC. Wireless LAN Cardbus Card or USB The SpaceLink™ Cardbus Card is a dual band (IEEE 802.1 1a/b) wireless LAN adapter that fits into a Notebook PC’ s PCMCIA T ype II slot with Cardbus support.
62 A Appendix W ARNING! T o prevent system failures, use (Safely Remove Hardware) on the taskbar before disconnecting the USB floppy disk drive. Eject the floppy disk before transporting the Notebook PC to prevent damage from shock. USB Keyboard and Mouse Attaching an external USB keyboard will allow data entry to be more comfortable.
63 Appendix A Monitor Out Connection Attaching an optional VGA/LCD monitor is just like that of a standard desktop PC (some configu- rations may require additional display driver set- tings. Y ou can view the Notebook PC display panel while simultaneously allowing others to view the external monitor .
64 A Appendix Optional Connections (Cont.) These items, if desired, may be purchased from third-parties. IEEE1394 Connection 1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilities like USB.
65 Appendix A DVD-ROM Drive Information The Notebook PC comes with an optional DVD-ROM drive or a CD-ROM drive. In order to view DVD titles, you must install your own DVD viewer software. Optional DVD viewer software may be purchased with this Notebook PC.
66 A Appendix Internal Modem Compliancy The Notebook PC with internal modem model complies with JA TE (Japan), FCC (US, Canada, Korea, T aiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/ 482/EC for pan-European single terminal connection to the public switched telephone network (PSTN).
67 Appendix A This table shows the countries currently under the CTR21 standard. Country Applied More T esting Austria 1 Ye s N o Belgium Y es No Czech Republic No Not Applicable Denmark 1 Ye s Ye s F.
68 A Appendix Glossary ACPI (Advanced Configuration and Power Management Interface) Modern standard for reducing power usage in computers. APM (Advanced Power Management) Modern standard for reducing power usage in computers.
69 Appendix A BIOS (Basic Input/Output System) BIOS is a set of routines that affect how the computer transfers data between computer components, such as memory , disks, and the display adapter . The BIOS instructions are built into the computer ’ s read-only memory .
70 A Appendix DVD is essentially a bigger , faster CD that can hold video as well as audio and computer data. W ith these capacities and access rates, DVD discs can provide you with dramatically-enhanced high-color , full-motion videos, better graphics, sharper pictures, and Dolby ® Digital Surround for a theater -like experience.
71 Appendix A Laser Classifications As lasers became more numerous and more widely used, the need to warn users of laser hazards be- came apparent. T o meet this need, laser classifications were established.
72 A Appendix POST (Power On Self Test) When you turn on the computer , it will first run through the POST , a series of software-controlled diagnostic tests. The POST checks system memory , the motherboard circuitry , the display , the key- board, the diskette drive, and other I/O devices.
73 Appendix A.
74 A Appendix Notebook PC Information This page is provided for recording information concerning your Notebook PC for future reference or for technical support.
Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, tran- scribed, stored in a retrieval system, or translated into any l.
Contact Information ASUST eK COMPUTER INC. (Asia-Pacific) Company Address: 15 Li-T e Road, Peitou, T aipei 1 12 General T elephone: +886-2-2894-3447 W eb Site Address: www .
An important point after buying a device Slim Devices E1887 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Slim Devices E1887 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Slim Devices E1887 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Slim Devices E1887 you will learn all the available features of the product, as well as information on its operation. The information that you get Slim Devices E1887 will certainly help you make a decision on the purchase.
If you already are a holder of Slim Devices E1887, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Slim Devices E1887.
However, one of the most important roles played by the user manual is to help in solving problems with Slim Devices E1887. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Slim Devices E1887 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
