Instruction/ maintenance manual of the product SLTV-1963A Skyworth
Go to page of 20
SL TV -1963A SL TV -2063A 19 /20 LCD T elevision / Monitor Owner s Manual.
RISK OF ELECTRIC SHOCK DO NOT OPEN WA RNING WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
11.POLARIZATION - This unit is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit in to the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
TABLE OF CONTENTS Table of Contents Congratulations Specifications Installation Television Location Power Source Combination VHF/UHF Antenna Remote Control Battery Installation Optional Equipment Conn.
¼ò ½é ¼ò ½é Congratulations Your new TV Monitor/Receiver features a solid state chassis that is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance. CONGRATULATIONS 4 Note: Specification are subject to change without prior notice.
INSTALLATION Installation Television Location Follow these recommendations before deciding the location of your television. Avoid excessive sunlight or bright lights, including reflections. Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
INSTALLATION Combination VHF/UHF Antenna Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from a combination VHF/UHF antenna to the antenna jack. Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead) Connect the UHF twin-lead wire to a combiner (not supplied).
BASIC CONTROLS AND CONNECTIONS Optional Equipment Connections Procedure Connect equipment as shown to Audio/Video input jacks. Select the Video mode by pressing TV/AV button.
»ù±¾²Ù×÷ »ù±¾²Ù×÷ REMOTE CONTROL OPERATION Remote Control Operation Turn on / off. POWER Mute the sound. Switch to desired input source. Back to previous viewed channel. 8 MUTE P.M I/II P.M AUDIO I/II CC CC TV/AV TV/AV Select channel or enter password.
REMOTE CONTROL OPERATION 1.POWER Button( ) Press this button to turn the TV on or off. 9 2. Mute Button ( ) Press once to mute the sound, press again to recover previously set sound level. This button will not work if CC display is switched on. 3. Picture Mode Button ( P.
REMOTE CONTROL OPERATION 6.TV/AV Button( TV/AV ) 10 Press this button to select the desired input source among TV, DTV,Video, S-Video, Componentand PC. You can press this but ton to switch among all available inputs in this menu continuously until desired input is displayed.
REMOTE CONTROL OPERATION 11.Recall Button( ) 11 Press this button to display information on current input. 12.Menu Button Press this but ton to enter Picture menu or quit from current menu.
12 Function Menu Operation Function Menu Operation Press MENU button to display Picture menu. You can browse Picture, V-Chip, Setup, Tune and PC Setup menu by pressing VOL+/VOL- buttons.
13 Function Menu Operation Function Menu Operation Input your password, press VOL+ to confirm. If the password is correct, image and volume will recover. Otherwise image and volume will still be blocked and above dialog will not disappear. Setup menu You can change some basic settings of the TV set in this menu.
14 Function Menu Operation DTV related functions can be reached in this menu. Antenna level Press VOL+ button to enter DTV Antenna level menu. This menu assists you to adjust the position and direction of t he antenna so that best signal can be received.
15 Function Menu Operation Skip Press VOL+/VOL- buttons to switch on or switch off the skip function. If skip function is on, you can not watch the corresponding program by pressing CH+/CH- buttons. While you can watch this program by ente ring the channel number directly.
16 Function Menu Operation Function Menu Operation Image Shrink This message indicates system is shrinking the input signal so as it can be displayed although part of the image will be lost.
»ù±¾²Ù×÷ »ù±¾²Ù×÷ Service Tips Service Tips 17 Please make these simple checks as indicated ( ) on the chart for the respective symptoms and their possible remedies.
18.
19 Skyworth Electronics I nc. 1312 John Reed Court, City o f In dustr y, CA 91745 Phone: 6 26-336-3698 Fax : 62 6-336-3238 Email: se rv ice@skyworth.com.hk Http: w ww .skyworth.com.hk Skyworth Electronics I nc. 1312 John Reed Court, City o f In dustr y, CA 91745 Phone: 6 26-336-3698 Fax : 62 6-336-3238 Email: se rv ice@skyworth.
An important point after buying a device Skyworth SLTV-1963A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Skyworth SLTV-1963A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Skyworth SLTV-1963A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Skyworth SLTV-1963A you will learn all the available features of the product, as well as information on its operation. The information that you get Skyworth SLTV-1963A will certainly help you make a decision on the purchase.
If you already are a holder of Skyworth SLTV-1963A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Skyworth SLTV-1963A.
However, one of the most important roles played by the user manual is to help in solving problems with Skyworth SLTV-1963A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Skyworth SLTV-1963A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
