Instruction/ maintenance manual of the product LCD-22L19 Skyworth
Go to page of 20
Description: Job No. MODEL: Brand Name: P/No. MANUAL(8M34A) 22L19 LCD-22L19 SIZE:A5 REV:0 Engineering Dept: Artwork By: Checked By: Approved By: Scale: Date: Date: Date: 2009-06-04 95120H skyworth Ins.
Read all of the instructions before operating the set. Keep these instructions well for later use. PRODUCT The ventilation should not be impede by covering the ventilation openings with items, such as newspaper , table-cloths, curtains, etc.
CLEANING Dust the set by wiping the screen and cabinet with a soft, clean cloth or some special liquid cleaner. Do not apply excessive force to the screen when cleaning. Do not use water or other chemical cleaner to clean the screen as this may damage the surface of the LCD screen.
1 3 4 5 5 7 8 INTRODUCTION, FUNCTIONS AND FEA TURES ....................................... SAFETY PRECAUTION ................................................................................. CONTENT ...................................................
BRIEF INTRODUCTION: TV FUNCTIONS FUNCTIONS PC MONITOR FUNCTIONS 1. Auto resizing & centering, perfect geometric graphic. 2. Supports PC sound source input. 3. Supports 640x480,800x600,1024x768,1280x1024,1440x900, 1680x1050 PC formats, refresh rate is 60Hz.
5 EXTERNAL SCHEMA TIC AND INST ALLA TION FRONT PANEL Note : The graphics are for representation only. 1 2 3 5 7 10 9 8 4 6 10 3.Program Up Button 2.Menu Button 1.AV/TV Button 4.Program Down Button 5.Volume Up Button 6.Volume Down Button 7.Standby Button 8.
6 BACK PANEL Note : The graphics are for representation only. 1. HDMI :Connect HDMI input signal from signal source such as DVD. 2. VGA: Connect a PC via a VGA cable. 3. YPbPr hare the same AUDIO input with A V. 4. S-VIDEO: Connect S-VIDEO Share the same AUDIO input with A V.
ANTENNA/CABLE CONNECTION There are two kinds of antenna in use. VHF/UHF To TV VH F/UHF ANTENNA jack (75 ) TWO KINDS OF ANTENNA VHF TV ANTENNA UHF TV ANTENNA U/V MIXER No need to install adapter COAXIAL ANTENNA (Note 1) (Note 2) FLAT C ABLE Need to install adapter 1.
REMOTE CONTROL 9. PROGRAM UP/DOWN Press to select memorized TV programs. BUTTON 2. MUTE Press to mute or restore the TV sound. BUTTON 3. NUMBER Press to enter a channel number . BUTTONS 16. SOUND BUTTON Press to select a different sound effect. 17. F A V .
18. SOUND TYPE BUTTON(NICAM) Press this button to select dif ferent sound type. Relevant sound types in TV SOURCE as below: 1. MONO: MONO 2. STEREO: MONO, STEREO 3. DUAL : MONO, DUAL1, DUAL2 NOTE: This button is unavailable for models without NICAM function.
For using the remote control, follow these instructions: Point the remote control towards the infra-red remote sensor on the main unit. If there is an obstacle between the main unit and remote control, the remote control may not operate properly.
There are several steps you need to follow before you can turn on the TV. Follow the instructions below to set up and turn on your TV. Operation could be different base on existence of hard power switch. 1. Plug the end of the power cord into an appropriate wall outlet and connect the antenna cable or CATV cable.
Colour temp. Adjusts the colour temperature of the picture,to select the option:Normal, Warm, Cool and User as you desired. Note: Cool is for a more blue palette of picture colors, Warm is for a more red palette of picture colors, and Normal is between the two.
SOUND SETTINGS MENU CONTROL Sound mode Select the audio mode as you desired. The audio mode are Standard,Music, Film, V oice. Bass Adjusts the lowest part of the sound. T reble Adjusts the highest part of the sound. Balance Adjusts how much audio (loudness) gets sent to the left and right speakers.
INSTALLATION Fine Skip Fav. channel Off 120.25MHZ MENU CONTROL Fine tuning T une RF frequency finely . Skip Sets the current channel to skip or not. Notes: 1. If the channel is set to skip, you can not select it by pressing PROGRAM UP/DOWN on the remote control.
MENU CONTROL FUNCTION SETTINGS Language Select you desired OSD language. OSD halftone select different OSD background transparent by it . Zoom select your desired picture zoom effect. You can select 16:9 or 4:3( ). only available for wide screen modesl Lock TV , Lock AV , Lock S-VIDEO, Lock YPBPR, Lock VGA, Lock HDMI Press u key to lock or not.
This section explains the s . hortcut and convenient functions PICUTRE shortcut 1. Press the PICTURE button on the remote control to display the current picture state. 2. Press the PICTURE button repeatedly to select different picture effect. 3. The on screen display will disappear in 3 seconds if you stop adjusting.
Z-/Z+ shortcut( only available for wide screen models) Press to change the screen format: 4:3, 16:9. () Only available for wide screen models FAV . shortcut 1. Press the FA V. button on the remote control repeatly , it will select FA V. channel cyclely .
NO PICTURE, NO SOUND 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3. Power plug is bad contact with the outlet. 4. Check the signal source. NO COLOR 1. Change the color system.
SPECIFICA TIONS 19 Audio output power (L+R): Mode: Working voltage: Rated power consumption: Screen size - diagonal: Dimensions (W x D x Hmm): Net weight: oo Working temperature: 5 C~35 C Working humi.
An important point after buying a device Skyworth LCD-22L19 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Skyworth LCD-22L19 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Skyworth LCD-22L19 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Skyworth LCD-22L19 you will learn all the available features of the product, as well as information on its operation. The information that you get Skyworth LCD-22L19 will certainly help you make a decision on the purchase.
If you already are a holder of Skyworth LCD-22L19, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Skyworth LCD-22L19.
However, one of the most important roles played by the user manual is to help in solving problems with Skyworth LCD-22L19. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Skyworth LCD-22L19 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
