Instruction/ maintenance manual of the product SK7 SkyLink
Go to page of 2
P ACKAGE CONTENTS Section 1 - Setting up the Wall Switch Receiver 2. Install the Wall Switch with the 3 wires, Live, Load and Ground. Use the provided wire nuts (C) to connect these wires respectively to the existing wires from the wall. Neutral wire is not required and cannot be connected to the Wall Switch Receiver.
Slide in 1. Remove the wall plate from the Wireless Wall Switch transmitter by loosening the two screws. 2. Remove the existing battery by sliding it out. 3. Insert the new battery, positive side up, by sliding it in and pushing down on the battery to lock it in place.
An important point after buying a device SkyLink SK7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink SK7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink SK7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink SK7 you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink SK7 will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink SK7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink SK7.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink SK7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink SK7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
